HOW? AXE I/O ONE Audio Interface, TONEX & Amplitube For Under $150?

Подписаться 30 тыс.

Просмотров 10 тыс.

50% 1

Is the Axe IO One the NEW Best Beginner Audio Interface For GUITAR? With Recording and Re-Amping in ONE compact interface. This is the best budget audio interface for guitar and bass!
Grab the AXE I/O ONE: sweetwater.sjv.io/WqqPWZ
Gear I use and essentials
Amps & Guitars:
ENGL Powerball II: sweetwater.sjv.io/DK09jj
Marshall: sweetwater.sjv.io/rQ4j4Q
H&K: sweetwater.sjv.io/eKvdvr
REVV: sweetwater.sjv.io/AW0L0j
Guitars: sweetwater.sjv.io/GmXrXV
Guitar Pedals:
TONEX Pedal: sweetwater.sjv.io/eKvd4r
Tilt Overdrive Pedal: sweetwater.sjv.io/Jzb5bR
Bonamassa Wah Wah: sweetwater.sjv.io/oqRQRb
Revv G8 Noise Gate: sweetwater.sjv.io/WqXBXP
Invader Distortion Pedal: sweetwater.sjv.io/EKbQbP
Amplitube X-Space Reverb: sweetwater.sjv.io/Pyj10z
Amplitube X-Time Delay: sweetwater.sjv.io/5gaObj
Phase 90: sweetwater.sjv.io/babRb9
Pedal Power: sweetwater.sjv.io/vNzezd
Guitar Recording:
Two Notes Captor X 8ohm: sweetwater.sjv.io/NkBAB7
TONEX Capture - Amp Capture/Re-amp: sweetwater.sjv.io/MmnanJ
SM57: sweetwater.sjv.io/KjKkKn
E906: sweetwater.sjv.io/75e3eA
Home Studio:
Interfaces: sweetwater.sjv.io/QyPZRM
DAW Controllers: sweetwater.sjv.io/xkEAEA
Studio monitors: sweetwater.sjv.io/QyPVOP
Software:
TONEX MAX: sweetwater.sjv.io/AW0Loj
Izotope Mix and Master Plugins: sweetwater.sjv.io/1reE5R
EZDrummer: sweetwater.sjv.io/ZQb0dq
Find great deals!: sweetwater.sjv.io/rQ4jnQ
Get a 7% discount from Distrokid:
distrokid.com/vip/lonelyrocker
Join my Patreon for bonus content and support resources:
/ lonelyrocker
Plugins and Loops:
www.loopmasters.com/?a_aid=61...
loopcloud.com/?a_aid=61735dcc...
pluginboutique.com/?a_aid=617...
I've got Merch!
lonelyrocker.myspreadshop.ca/
----------------------------------------------------------------------------------------------------------------------------------------
The Axe IO One from IK Multimedia is the little brother to the Axe I/O and the Axe I/O Solo. It is a compact, 1 in, 3 out audio interface for recording guitars, bass and anything else you can throw at it. It boasts some key features from the main Axe IO making it a great audio interface for beginners or those looking to build a portable guitar recording rig. For those looking for a bass audio interface, the AXE I/O ONE is also a great solution. With it's JFET to Pure input stage and tone shaping with the Z-Tone control it delivers a wide range of tones for a myriad of recording needs. A candidate for the best audio interface 2023, it will be a great solution for beginners and home recording Studios because of it;'s compact size and because it ships with TONEX SE, Amplitube 5 SE and Ableton Live Lite. That's OVER $300 WORTH OF FREE SOFTWARE. TONEX FREE. AMPLITIUBE FREE. In this video I explore guitar audio interface setup examples and how the AXE IO ONE is great for reamping as well.
For more information: www.ikmultimedia.com/products...
-----------------------------------------------------------------------------------------------------------------------------------
Follow me on Social Media:
The Lonely Rocker's Club on Facebook:
/ lonelyrocker
Instagram
@lonely_rocker
/ lonely_rocker
Twitter:
/ thelonelyrocker
Index
00:00 - Start
00:50 - AXE IO vs. AXE IO One
02:30 - AXE IO One Features
05:12 - Z-Tone Control
06:59 - Z-Tone Examples
08:54 - Amp Out Feature
11:11 - Re-Amping
13:11 - Recorded Tones
#ikmultimedia #audiointerface #lonelyrocker
Video production services provided by spicedna.com
For companion blogs and articles visit lonelyrocker.com
All video content and original music is ©2023 Spice DNa where applicable.

Хобби

Опубликовано:

27 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@LonelyRocker Год назад

✅✅✅ I'm buying one of these 3 Modern Guitars for Drop C and High Gain tones! But which one should I get??? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TJYpeV4rIKg.html 🔥🔥🔥

@SonicDriveStudio Год назад

Cool video man! Seems like a fun little interface!

@LonelyRocker Год назад

Thnx Jon! Handy little interface for sure…

@mananakoa2412 Год назад

this has everything players need thanks LR!

@LonelyRocker Год назад

My pleasure!!

@JesseJuup Год назад

I just bought the Axe I/O One for 112€ incl. VAT and shipping, because I had IK JamPoints. A complete steal that is!

@LonelyRocker Год назад

Nice score!!! Enjoy it!! Let me know what you think once you dive in!

@sealinski Год назад

I got this a couple weeks ago and have loved it, but this vid really helped- great job - thanks - I was wondering if you can actually save the re-amped signal in Tonex, like Tonex capture? Thanks.

@LonelyRocker Год назад

Awesome! Enjoy it! Glad Ic an help! You can Capture an Amp with Tonex. There is a simplified setup since it's only one input. You can't connect a guitar in this setup but TONEX uses the internal guitar loops. This is a live capture that runs through your amp. IK has good schematics in their users manual but the setup in TONEX is pretty self-explanatory. Good luck!

@paulcanz 4 месяца назад

Thank you , IK MEDIA didn’t tell me that when I contacted them , sounds awesome though 🎸👍🏼

@LonelyRocker 4 месяца назад

Glad I could help!

@aj81ds 6 месяцев назад

Great informative video. Do you know if this would work using a usb-c cable to connect this interface with my 2018 Mac mini, or should I use the included cable with an Apple USB-C to USB Adapter? Also, do you know if you can record both the XLR and instrument input at once? Thank you

@LonelyRocker 6 месяцев назад

Thanks!! I think either cable should work as long as you are connecting directly to your computer. You can only use one input at a time on this interface. If you need more I'd suggest the bigger AXE IO interfaces....

@timothy5974 Год назад

Nice interface options. Question? I own a Scarlett Solo and it’s latency is very low while playing amp sims, how is the latency with this unit? May be a better option over the Scarlett, love the ability to play through my 5150 with amp out feature. Well done. Thank you

@LonelyRocker Год назад

My pleasure! Honestly, latency, I find can occur for a number of reasons. Outside of the interface. It's why I love this amp out feature. I didn't notice anything compared to my focusrite clarett in my tests. But latency can happen, especially later into a project when you have a lot going on. and your CPU plays a part in that as well.

@dekonstructing 9 месяцев назад

I can chim in here. I own the Axe I/O but I suspect the drivers are the same base code for all the new IK interfaces. While your CPU/bus speed/RAM can determine how low you can get your audio buffer. Typically 128 is "standard". However I can say the IK interface drivers are EXCELLENT. I have a Ryzen 9 5950X system and I can run amp sims at 44.1/48KHz as low as 8 buffer sample. When I ran my interface on a 11th Gen i5 laptop I was still able to use 16 buffer just fine is I was using a single amp sim. This means you will get incredibly low latency RTL (round trip latency) how long it takes to hit the AD converts then back out to the DA conveters (what you hear when connected to the outputs). I'be owned Audient, MOTU, M-Audio, PT Mbox interfaces and the IK HANDS DOWN wins in quality and amaingly well coded drivers. I don't own a MacOS system but my results were based on using Win10 and Win11 x64.

@sybamunki Год назад

forgive me if you've covered this in a prior video.... I'm using a Tascam 2x2 interface to DI my electric guitars, and the sound is quite thin and distant. I can't seem to get the guitars to sound full and up front. Could this be the quality of the interface or am I doing something wrong with how I'm recording? (or both)? I'm not going crazy on plugins - using Helix and Logic amps, some EQ and reverb. Would the Axe I/O be a step forward?

@LonelyRocker Год назад

Sounds like something else is going on. But so hard for me to diagnose like this. A guitar plugged straight into an interface is a pretty simple procedure regardless of what interface you are using.

@bryanblackburn9673 7 месяцев назад

got mine for $75 because I had $30 in jam points and they dropped the price to $100 for black Friday so looking forward to playing it any day now. May add the tonex max upgrade at $79 but I kind of think I may want to add the pedal so I may wait till then to get that pedal since the software is free with that.

@LonelyRocker 7 месяцев назад

Sweet! Enjoy it!

@willgo7898 Год назад

If capturing using this interface's re amp circuit and Tonex software ... how does this compare with using the Tonex Capture hardware (box)?

@LonelyRocker Год назад

Putting this into proper perspective, the Capture Box offers more flexibility with more on board controls and it's a solidly built unit. So I can assume it has higher end components. But it is also an additional cost. It also involves more cabling while the AXE IO will make capturing so much simpler. I haven't done a direct comparison but I'm certain the IO will perform well...

@mikezolik7409 3 месяца назад

Thanks for your video, I'm an old rocker working to get up to date and start recording. I have Presonus software, speakers, and purchased the Axe I/O on Reverb. Was that a mistake, as there is no software included? I hadn't considered that.... thought I was saving a buck. thanks

@LonelyRocker 3 месяца назад

MY PLEASURE! The license is generally attached to the serial number. I'm not sure how it works with IK but the seller should unregister it and let you register the product. If it let's you then it may give you the software. If not then you might be stuck. Certainly would be worth getting this new so you get all of the perks but try registering the serial number snd see what happens. Good luck!

@mikezolik7409 3 месяца назад

thanks for the speedy reply!@@LonelyRocker

@tjnugent62 2 месяца назад

Can you play through your computer monitors instead of running to your amp? Is there latency issues with Windows 11? Did you have to set up windows with less services when you capture?

@LonelyRocker 2 месяца назад

This is designed to connect to your computer not your amp. The amp is being re-amped and recorded into your computer….

@marcolanzi1471 6 месяцев назад

Does this audio interface have a system to save the signal from clipping? like the focusrite scarlet 2i2 4th generation?

@LonelyRocker 6 месяцев назад

There's a clipping warning but form there it would be manual as far as I remember...

@peterdavies7868 7 месяцев назад

Hi there, new to all this so apologies for the long question. I'm looking to put together Tracktion Waveform DAW, with Amplitube 5max and Tonex max. I assume this would give me all the possible combinations that i would ever need. I have an old Pod X3 live which i think i can use as an audio interface but really like the look of the Tonex pedal, as i will only be playing at home and not live etc is it worth buying the Tonex pedal or stick with the X3 live? Alternatively there is the Axe IO one or Axe IO, but as I would only ever be recording one thing at time I assume there would be no need to go for the Axe IO? Sound will be by output to studio monitor speakers as s I'm restricted for space. Thanks in advance for any advice..

@LonelyRocker 7 месяцев назад

Choosing an interface comes down to IO. What are you connecting to it. Hooking up speaker monitors? You need at least 2 outputs. Want to record a microphone? You need a mic input. Want to use a condenser mic? You need phantom power. Want to record a good DI guitar signal? A JFET/Instrument input comes in handy. Want to add inputs later on? Then you may want an optical input. So list all of the things you need and get the one that services that need. Hope that helps!

@peterdavies7868 7 месяцев назад

@@LonelyRockerThanks for the reply, I will only be plugging one thing in at a time (Guitar or Mic), then usb in to the Laptop/DAW and stero outputs to the monitors so the Axe IO One seems to be the best and most cost effective option. As the Tonex pedal gives the same input/output options as the IO One am I correct in saying that the only reason for me to spend more and get the pedal is if I was planning to take the sounds out of the house i.e. gigging? I am only intending to play in the house plugged into the laptop DAW/Monitors etc then it's a lot more money for functionality that I probaly don't need?

@jcalzada74 5 месяцев назад

@peterdavies7868 pod live is an awesome pedal. Even you can use their interface to change settings or made new patches

@waynedoherty7758 Год назад

This or universal audio volt? Volt 2 would allow capture of stereo effects, but needs a seperate reamp box mmmm

@LonelyRocker Год назад

Hard for me to tell you...there is also a 2 channel AXE IO...if you are a guitar player the AXE IOs are great if you want to re-amp. If not, both worth considering....

@yashdaby6231 Месяц назад

My amplifier is connected to a cab and the amplifier also has a line out. Can you take the line out of an amplifier and plug it into the input of the interface, or does the interface only accept mic and instrument level input? Thank you.

@LonelyRocker Месяц назад

What type of line out is it? Does the amp have a built in load if it's a tube amp?? The Axe IO One accepts line and mic level. So you can take the line out and go into a line input. Again just make sure you remain connected to a speaker or load if it's a tube amp. If its not a tube amp it doesn't matter. Hope that helps.

@yashdaby6231 Месяц назад

@@LonelyRocker Thank you for your reply. It is a bugera 333xl tube amp. It has a dedicated line out with a level knob that I suppose can be used with a virtual cabIR on a computer. My question is whether the Axe ONE can accept a line level input, or does it only accept a mic or instrument level input? If it doesn't accept a line level input I suppose you cannot plug the output of a tonex pedal or Kemper into the AxeONE for recording. Any thoughts on this? Thanking you in advance.

@LonelyRocker Месяц назад

I mentioned in my reply to you that the Axe IO One accepts both line and mic levels. And there is a phantom power switch on the unit to connect condenser mics so you have all of the options you need...good luck!

@hybrydsanity5857 4 месяца назад

I don't get how you amp model amps with only 1 input , I bought the Axe I/O one to Model for loading my personal amps to my Tonex pedal .also so i didn't have to spring for more expensive interface or the Tonex captue box.(already own a Focusrite and Presonus) but i don't see a solution for Modeling an amp with one input because the microphone or direct out of the amp goes to the input of the AXE I/O . I thought of recording the signal then re-amping but Tonex plugin in the DAW doesn't have modeling ! no one has been able to answer this question including IK media . so this Interface is useless to me , should i send it back ? , if you can explain how your doing it because you say you are in this video by recording then re-amping but how are you getting that recorded signal to the stand alone Tonex App ??? ,or did I confuse re-amping the way you did in your daw with this being able to capture a model and file it in the Tonex App .

@LonelyRocker 4 месяца назад

I never said in the video you can ‘model’ amps but you actually can. The reamp out goes out to your amp and the output (if you’re using a load box) or microphone goes back into the one input. You can’t connect a guitar but you can use the internal loops to set levels. There is a video on RU-vid that demonstrates this. Just search creating tone models with Axe IO One.

@guillermoseijo2437 3 месяца назад

Podrías orientarme donde puedo conseguirlo, gracias.

@LonelyRocker 3 месяца назад

Best to check IK Multimedia’s website.

@guillermoseijo2437 3 месяца назад

@@LonelyRocker en la website esta suspendida la venta!

@ghsi007 3 месяца назад

Can i play live with all the mixing and effects or those only can be done on a recorded track?

@LonelyRocker 3 месяца назад

You could but maybe better to get the TONEX pedal for gigs. Better than dragging a computer to your gigs.

@ghsi007 3 месяца назад

@LonelyRocker Sorry for the misunderstanding, my gigs would be 100% at home. :) Being playing the electric guitar for almost a year. I have a solar s2.6c guitar a marshall code 25 amp. My main goal is to get the guitar tones of the bands i like and with the tone practice their songs. Thats why i got the digital amp that can simulate pedals and effects but as i understand audio interface with simulated amps and pedals does it much better and have much more variety of tones. I just want to understand the simple stuff like if i plug my guitar to the audio interface while its connected to the pc, can i set guitar using the software that comes with it and it will shape the tone live as i play the guitar through the monitors with what i set in the software? And not that the guitar tone shaping can be done only on a recorded track because its need time to render or something like that? Thank you very much!

@LonelyRocker 3 месяца назад

@@ghsi007 oh I misunderstood. You can record the sound of your amp by plugging the output of your digital amp into this yes. Or you can plug your guitar straight into this and record the dry sound of your guitar and add your tone with the bundled software or any other plugins you like. It’s very flexible and Tonex and Amplitub are a ton of fun. I have a ton of videos on my channel about recording guitars. You should dive in. I’m sure I have more videos to help you. Good luck!

@ghsi007 3 месяца назад

Do i need to record in order to add my tone? Can it not be done live?

@LonelyRocker 3 месяца назад

@@ghsi007 Yes, you can play through the app or plugin in real time...The standalone apps are great for that....

@dragonstone6594 Год назад

Shame is not a 32bit interface also, like the Zoom UAC-232

@LonelyRocker Год назад

Well the Zoom is a bit more money. This is a VERY inexpensive interface. I guess you have to give somewhere...

@masterofreality230 Год назад

Looks pretty cool, but you mean there is not a stereo input? Seems silly.

@LonelyRocker Год назад

It's a very good device for the money. It's not silly that it doesn't have stereo inputs because there are other AXE IO devices in the lineup if you want more inputs. This is the one input version.

@masterofreality230 Год назад

@@LonelyRocker Well, I just think IK rushes a bit and some things are not as well thought out. I still think its silly to only have one. Other people might love it.

@LonelyRocker Год назад

I think you are missing the point. They already have an Axe IO with 2 inputs. So why make another one? If you need two buy the other one. If you only need 1 buy this one. There are 3 AXE IO models now. This expands the lineup.