How do I assemble langstroth frames for a deep box beehive? This is a step by step guide through my first time building a wired, foundationless hive frame. In an effort to save a few dollars I purchased a box of unassembled pre-cut frames and decided to assemble them my self in my garage with whatever tools and supplies I had available. I did have to purchase a few items but made the best of what I already had on hand. Leave any suggestions for future builds in the comments below. Items in the list below are or could be affiliate links. Thank you for watching and supporting.
FULL ITEM LIST:
Skip this list and buy Assembled Frames here:
Unassembled Frames: amzn.to/2yWkmFV
Pliers: amzn.to/2WTbYPq
Wire Cutters: amzn.to/2WV9nVb
Small Screwdriver or Large Nail: You’ll have to get creative with this one or find a Wire Tensioners below.
Wire Tensioner: amzn.to/2yP9ZUu
Quick Square: amzn.to/2Z1zj4c
Sharp Knife: You should already have one. If not - This one looks good: amzn.to/2T8cd8l
Staple Gun: If you don’t have one - Just get the Hole Eyelets (below).
5/8” Staples: If you don’t have one - Just get the Hole Eyelets (below)
Hole Eyelets (preferred over staples method): amzn.to/2T513Rv
1” Brad Nails: amzn.to/2X0kpsc
Brad Nail Gun: amzn.to/2WxhacY
Air Tank: amzn.to/2T0ie6X
5/8” Wire Nails (wrapping the wire):
3/4” Wire Nails (nailing the wedge):
Waterproof Wood Glue: amzn.to/35ZJUOn
Small Brush: amzn.to/3czGN2d
Hammer: If you don’t already have a hammer just buy pre-assembled frames ;)
Stainless Steel Wire: amzn.to/2y7iWYU
8 окт 2024