Cindy - NO - A hoot panel uses low voltage to a Sensor Probe and does not use float sensors ... I would strongly recommend that you contact a certified HOOT service provider / installer to assist with replacing that control panel!
So, good information, however, I as a designer and an operator would say that the panel itself is "lacking" as it has No pump cycle counter, no pump elapsed time meter, all of which provide excellent diagnostic information for the service provider. I also prefer a panel that the Hand / Off / Automatic switch is INSIDE the box so it cannot be "accidentally" tripped to OFF or HAND without opening the box. AND Silicone filled wire Nuts !!! too many DIY's use regular wire nuts that are NOT designed to be used outdoors or in a wet environment!