How does Induction Heating Work ? - Induction Heater Circuit 1000 W
Product purchase link : bit.ly/3iztp4c
Coupon: BG020b0a
Don't miss the opportunity to discount the Banggood summer Prime Sale: bit.ly/3j7t60N
Banggood summer Prime selling tips: bit.ly/3zJ6Vnf
FEATURES______________________:
This part of induction heating using low voltage DC power supply 12-48V
Max current 20A, max power 1000W.
53V power supply tested when working properly.
Due to its moderate strength, it can be used for small parts DIY players does hardening, annealing and other heat treatment,
It can also be used with a graphite crucible that melts gold, silver, copper, aluminum and other metals, uniform heating is fast, very convenient.
Inner diameter of coil: 40mm of Coil
height:
Without 3A load current
50mm 24V input 48V input without 6A load current
The higher the voltage, the greater the heating current when the same thing happens, the better the effect,
But at the same time the heat is also large, so the general use of the words 24V or 36V power supply is enough to eliminate the actual situation to choose the input voltage.
Suitable for 12-36V power supply (not included)
The coil adopts 40mm Crucible.
NOTE___________________:
1, The Kit is a complete set of driving circuit elements and brass
Includes 2, buyers need to bring their own power and cooling units.
3, the circuit using double-sided fiberglass sheet, mainly used to expand the copper tracks, the whole back surface of the resonant circuit, continuous operation, please add a fan to blow from above, nice to the resonant capacitors and other components.
4, switching power supply please use the high strength due to just drop the output voltage of the machine rises slowly, and if the voltage rises to 12V, the circuit is opened when the first induction heating is usually slow startup function, note that the vibration can't afford to inadequate because the initial voltage, the MoS tube and this burnt components, resulting in two simultaneous messages are.
So when the first power supply voltage reaches 12V, it will start switching, and then it will reach the induction heating circuit.
5, the volume of the object heated in the heating coil can not exceed 1/5 of the volume (if the heating roller, then the diameter of the heating coil is less than 1/3 of the diameter), or it can be due to overload or close the power supply to the Circuit.
This circuit can tolerate 20-30A input current moment, although it does not exceed 15a during safe operation, you can easily add an ammeter between power supply and heating driver board, but you can always monitor the current overload.
This circuit can not only heating by induction, copper pipe enters the high frequency transformer, it is a powerful inverter.
1, using a customized substrate up to 8.5 mm thickness to increase the heat sink!
The cooling capacity is very strong.
2, using m4 columns, fire smaller, more efficient.
Package contents:
DRIVER Card 1 x low voltage induction heating
1 x Rice
29 июн 2021
