This system mainly consists of Omron PLC, PLC analog module MAD11, ATO load cell transmitter, ATO S type load cell, 24VDC power supply, personal computer, etc. Buy them online: www.ato.com/load-cell
In the video, the data read by the PLC is constantly changing because of interference. Solving this problem can be avoided by adding shielded wires or grounding the shell.
Sr i have omron cp1e plc and mad42 analog module but i am unable to select the module how to select module in cx programmer Please help me sr I am waiting for your reply
1. If your Arduino can only read digital signals, what you need is a transmitter that outputs digital signals (RS485). 2. To read digital signals, information needs to be exchanged through a communication protocol, so direct reading is also not advisable. 3. If your Arduino can directly read standard analog signals (0~10V, 4~20mA...), then you can display the weight data correctly. 4. After you read the transmitter data, the display data may need to be converted (such as hexadecimal to binary or decimal).
Good Morning you could help me with a weight indicator reading by communicating with clp omron through serial port 232 how to convert the strings into real numbers since already thankful valentine
You can store the obtained data in a register area, and then use the PLC to monitor and view the data in real time. You can convert and display it to decimal in the PLC viewer. Or use some device to read the data in this storage area and display it, this device can be HMI...or other
