How I Built A DIY Tiny Home Camper From Start To Finish 

Wow, thank you! 😊

Thank you I’m glad you enjoyed the film ❤️

I'd say a good portion of that is the electrical system, batteries aren't cheap

Yea what?! I just finished mine with a steel box frame and 360 insulation with even more accessories and mine came in around 2200$

@@danneradcox1808 that's my only guess. And that seems like HUGE over kill for a teardrop IMO

@@SamTaysProductions it's my best guess, I've never looked into this sort of thing so count me as an uneducated opinion lol

I built mine for about 3 grand, and that included buying tools I didn't have. 12 seems a bit over done.

That's correct it's very unlikely for people to make mistakes like this he did not think much about the placement of his intakes and outtakes

One fan pulls air in and the other pushes air out. They work really well the outtake of the inverter is near the outtake fan.

@@buildersblueprint Yes, I understand. :-) But fans blow in cones. So by having one blowing in at the same height as one blowing out, you've overlapped the cones and made a cylinder of air running from the intake to the outtake. The air blowing in will blow right out and leave eddies of hot air in all of the corners (especially at the bottom since you've put the holes at the top). Whereas if you had one low and one high, there wouldn't be overlap in the cones, meaning they're working together to mix all the air. But really two fans are unnecessary (though you still want the two holes). Since no two fans ever blow at exactly the same speed, you're either creating positive or negative pressure in the box (depending on which one is slower). Positive pressure would be great in a box containing a propane tank, but otherwise it's just kind of inefficient (it's not bad, per se, just a minor waste of pennies and electricity). Overall, you really want your intake to be low (where the coolest air is) and your outtake to be high (where the hottest air is). Any time you build an air system with two holes, you're creating a river of air between them; if they're at the same height, they really only cool objects in line with them. By varying the height, you create a diagonal which is a longer straight line, meaning it can cover more components. :-)

The intake should be low, and out should be higher because it will push the hotter air naturally up and out.

Thanks bro 🙌

Welding the frame definitely gives me piece of mind. Thanks for watching

Thank you send me your address. I’m going to ship you a free hat. Beeerunbus@gmail.com

Thanks 😊

Thanks 😊

Thanks so much ❤️

Thanks Freddy. Email your address I’m going to send you a free hat. Beerrunbus@gmail.com ✌️

Thank you for watching i’m glad you enjoyed it 😊

Thanks for watching 😊

Thank you I’m glad you enjoyed the film. New video coming out this Saturday. 🙌

Thank you Nathan. Email your address im going to send you a free hat and sticker. ✌️

Thanks 😊

Thanks I’m glad you enjoyed the film 🤙

Thanks for watching 🙌

Thank you sir 🤙

Thanks 😊

Thank you. I’m glad you enjoyed the film

Glad you enjoyed it 😊

Thanks 😊

Thanks glad you like it 🙌

Wow, thank you!😊

Thanks homie 🙌

Thanks so much ❤️

Thanks I’m glad you enjoyed the film

Really appreciate this comment 🙌

Thank you 😊

Thanks 😊

Thanks I’m glad you enjoyed the film 🤙

Thank you very much!

That corrugated plastic is pretty. With the foam and insulation in there, it feels like it’s as hard as a rock.

We may do that this summer. I’m glad you liked the video

Thank you I’m glad you enjoyed the film 🤙

Thanks 😊

Thanks 😊

Thanks i’m glad you enjoyed the film 😊

Tom is the man

Thanks 😊

Thanks Homie. I’m glad you enjoyed the film. 🤙

Thanks. I’m glad you enjoyed it

Thank you for recognizing this. We try really hard to build these campers to the best of our abilities.

Thanks 😊

Thanks 😊

Thanks 😊

Thanks we really are trying to make these campers as nice as possible.

Thank you it weighs 1460lbs and we used About a gallon and a half of resin

@@buildersblueprint Thanks! One quick follow up... purchased the plans! nice work... it doesn't mention what weight fiber you used... I've never used fiberglass before... but i understand the weight of the fiber cloth determines how much resin you need... Can you confirm what fiber cloth you used? - Thanks!

🤙

Love it thanks ❤️

Thank you that’s actually not a bad idea

Thanks for the info. The stuff we use is called levelx and have had no issues with it for years. I’ll try butyl tape next time. ✌️

www.etsy.com/listing/1730301633/off-grid-micro-camper-blueprints?ref=listings_manager_grid

Thanks 😊 This camper is selling for 14k

Really appreciate it 😊

That sounds awesome, bro And yes, you can absolutely bring your PlayStation inside of here

@buildersblueprint if u were giving it away and I won of course I'd do that can u make a bike camper like this?

You might find a maker space in your area so that you can build your shelters for homeless people. All the tools in a maker space would be available for your use. Plus plenty of people around who can help you with ideas and designs.

@@aerobiotic good idea...I'll have to look around

Correct this is because if we want to add more solar in the future, we will not have to change the solar controller

We absolutely did good eye for noticing the vent covers just hadn’t come in yet and we really wanted to get the video posted

Thanks. Next time I’ll make it bigger

Thanks. We spent just under 12k

The link for the build plans should be linked below.

www.etsy.com/listing/1730301633/off-grid-micro-camper-blueprints?ref=listings_manager_grid

1460lbs

Thanks. There is storage inside and the upper cabinets in the back finally have the netting.

Yes, but does that include a barbecue and outside chairs for when you sit around a fire pit?

1460lbs