No video :(

How I Fixed Flat Tires on my Handtruck...

Подписаться 45 тыс.

Просмотров 46 тыс.

50% 1

My Handtruck's tires always seem to be going flat. I don't always use it, but when I do..I don't want to fill them with air.
I figured I'd add some Fix a Flat to them.
Seems to work good....
Other CheapGeek Stuff-
Email: CheapGeek.net@gmail.com
Home: www.cheapgeek.net
Twitter: / cheap__geek
Pinterest: / cheapgeek1
Tumblr: www.tumblr.com/... CheapGeek's Amazon Page-
www.amazon.com...
My BUDGET Camera Gear-
Canon XC-10
amzn.to/2Bzewpb
Canon EOS 77D
amzn.to/2BzzWme
Canon EOS M6
amzn.to/2GlpOkq
Canon PowerShot G9X
amzn.to/2DECgdu
Canon Vixia HFR 70
amzn.to/2By6oW3
My favorite Lenses-
Canon EF-S 18-135mm f/3.5-5.6 IS Nano USM Lens
amzn.to/2EkQHaO
Canon Portrait and Travel Two Lens Kit
50mm f/1.8 and 10-18mm Lenses
amzn.to/2H8Gyf4
Canon EF-S 55-250mm f/4-5.6 IS STM Telephoto Zoom Lens
amzn.to/2BSn5jr
DRONE-
amzn.to/2Ceq3uj
DISCLAIMER: This video and description may contain affiliate links.That means that if you click on one of the product links, I can receive a small commission.
This helps support the channel and allows me to continue to make videos like this.
Thank you for the support!
It’s very much appreciated!

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@CheapGeek 11 лет назад

Nope. The rubber valve stem would push back inside the rim / tire. I didn't remove the schrader valve. I just used the needle nose pliers to hold the stem, so I could screw the can of fix a flat onto the valve assembly. You definitely have to remove the schrader valve for the Slime tire stuff. :)

@audiebee3772 4 года назад

Thank you--shied away from the Fix-A-Flat to try the zip tie or rope method to squeeze the tire center and make the sidewalls seal... Worked like a charm... used a kids jump rope for rope and a simple screwdriver. Started inflating with an air compressor with a digital readout--once I saw the pressure climb up past 18 psi slowly loosened the rope knot and let it keep going to 30 psi... Thank you for the video--figure I'd save the Fix-A-Flat for a puncture or tire seal issue!

@CheapGeek 11 лет назад

It's a tubeless tire. The fix a flat does a pretty good job of sealing the bead of the tire to the rim. Worked for me. Still holds air too. :)

@crumblv 11 лет назад

Thank you guy. I have the identical hand truck with the same/identical problem! I have to roll it out to the car and use a small d/c emergency compressor every time i want to use it. I was gonna take it over to the auto tire shop and have them fix it for about$10 per tire when the idea of fix-a-flat hit me. I Googled "can i put "fix-a-flat" in a hand truck tire?" Your video popped up and it looks like problem solved.

@OnlineAdjunct 2 года назад

I tried Fix-a-Flat to fix a flat tire on my Milwaukee hand truck. It seemed to work for a while and then it stopped working. So, I tried it again. It seemed to work for while and it quit working. After the third time, I remembered the definition of insanity as doing the same thing over and over and expecting different results. For a permanent fix, you need to replace the wheel.

@ginaangelea8436 9 лет назад

Thanks for posting this - I have been thinking about doing the same thing and feel better finding someone that's done it.

@CheapGeek 9 лет назад

You're Welcome! Thanks for watching. :)

@JohnnyHog16 11 лет назад

Is that a tubeless tire? Was the seal broken on it when you started? While always have a busted seal, will fix-a-flat fix that? Thanks for the video.

@ZaSu2u 3 года назад

Is there enough contents / spray in the Fix-It can to do both tires or only one tire?

@CheapGeek 3 года назад

Both. 👍

@davidbain1405 11 лет назад

leaving the valve stem out wasn't an issue?

@CheapGeek 11 лет назад

You're Welcome, mines still holding air. Been a while too. :)

@HnkRrdn 3 года назад

Did you use one can for each tire? Or split one between both wheels? I couldn't tell, I see you posted this 8 years ago but would be greatful for a response.

@CheapGeek 3 года назад

@@HnkRrdn It was one fan for both tires. It was more in the one that kept getting flat. So 1 for both.!👍😉

@djiwONLINE 3 года назад

Probably won’t leak? Hmmm… so what was the final result?

@CheapGeek 3 года назад

No leak 👍

@djiwONLINE 3 года назад

@@CheapGeek thank you! I have an issue with my hand truck s the tires won’t stick to the rim and the air leaks out! I really don’t want to have to buy a whole new tires nor do I currently have the tools to change it out with prior to my next move. Thank you soooo much for those posts and your swift reply. I’m going to try this this afternoon!