How I Mix and Apply My SKIN TONES in Real Time/ No Time Lapses

Подписаться 29 тыс.

Просмотров 20 тыс.

50% 1

I've had a lot of people that wanted me to do a video on how I mix and apply skin tones MY way in real time, so here it is! This is a longer video because there are no time lapses. I only do realistic skin tones, so while this may not be the correct tone you're looking for, this video gives you an insight on how to mix and apply them to achieve what you're looking for.
My NEW Patreon Link / creativecollector
Check out some of the items I used in making this plus my other models. Use these special links at no extra cost to you, plus they help my channel out.
Linant Base 3D Printer ------ amzn.to/3F4pljZ
Anycubic Photon Mono X ----amzn.to/3yEbo9R
Elegoo Standard Grey Resin ------- amzn.to/3fQ9bky
Mr. Hobby GTool ------ amzn.to/3xBlyqs
Elegoo Saturn Printer -------amzn.to/3fNVQcs
Creality Ender 3Pro-----amzn.to/3CvcSFX
Plastic razor Blades ----amzn.to/3xF5lAy
Silicone Slap Mat ------- amzn.to/2VACh0p
Master Airbrush --------amzn.to/3s8dV9Z
Hatchbox PLA filament------- amzn.to/3lVzcm7
Elegoo Washable Grey Resin ----amzn.to/3CEmeyW
Elegoo Wash N Cure Station ----amzn.to/3CB1YOJ
Paper Strainers 50ct.------- amzn.to/3jMq28X
Vallejo Liquid Mask-----amzn.to/2ZkHHhI
Army Painter Wet Pallette----amzn.to/3FJFN9P
10 pc Detail Paint Brush Set---amzn.to/3r7KgPD
#3dprint #skintones #painting

Хобби

Опубликовано:

11 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@MichaelKalb-vn6gg Месяц назад

Although I'm more of a mini painter, this REALLY helped train my brain for good skin tone mixing. Thank you!

@MigMonkey 2 года назад

I'd love to see more like this, I've always struggled with faces. That's why I tend to stick to models with helmets..

@TheCreativeCollector 2 года назад

Once I get a few more patrons I'm going to start doing some live streams where we can go over painting tutorials together, plus I plan on doing a few more of these type of videos.

@ironcladwraith 5 месяцев назад

@@TheCreativeCollector Do you seal the head after airbrushing and before you do the wash or do you just dry it and then put on the red and yellow wash?

@basfinnis 11 месяцев назад

Really effective. Thanks for the description 😉

@princeofprintness2892 6 месяцев назад

That is so awesome !!

@TheSpider-ManSanctuary 10 месяцев назад

that was awesome steps you went through. thanks for that. gives me something to try

@valknut3d 2 года назад

Thank you very much for the advice! I will put them into practice to improve!

@TheCreativeCollector 2 года назад

You're so welcome!

@paddo0011 2 года назад

Very helpful seeing close up painting, it helps alot!

@TheCreativeCollector 2 года назад

Glad it was helpful!

@Julian1701D Год назад

Very helpful thank you 🤟

@baleeghal-qarooni5146 Год назад

Excellent, your video made me reconsider my -skin tone- technique. I like it... Also, I like the dry palette. Do you have a link for it? Thank you for the video.

@the250mikec Год назад

Love it. Thanks

@TheCreativeCollector Год назад

Thank you too!

@andrewshaner4135 Год назад

Thank you for the help n tips:)

@TheCreativeCollector Год назад

Anytime!

@slainx Год назад

Awesome

@philfoofighter 2 года назад

Great video. Really p, really useful

@TheCreativeCollector 2 года назад

Thank you sir!

@darren990 2 года назад

great video that is

@TheCreativeCollector 2 года назад

Thanks. Glad you liked it. 👍

@eltenda 2 года назад

Very very interesting

@TheCreativeCollector 2 года назад

Very!

@Gamesg-m8w 27 дней назад

Part 2 please😢😢😢🎉

@joejvitale 2 года назад

What about it you want to brush on those colors you mixed for those w/o airbrushes? Same process or do we need to do something different?

@TheCreativeCollector 2 года назад

I would say same process as far as mixing, but apply the shade in thin layers, like using a glaze. Build it up so it doesn't go on too strong.

@toocool5723 2 года назад

How do you get the paint to go on so smoothly? Everytime I paint it's like it peels off after I dry & try to put another coat Even with thinned paints Could it be the primer? Or the hairdryer I use to speed up the drying ?

@TheCreativeCollector 2 года назад

Most likely it could be your primer. I've never had an issue with paint peeling off. And if you're using a hair dryer, try not to get too close or use too long. That can peel it off too.

@clintlucas7604 2 года назад

After each layer, I let dry and I either use a workable fixative or a flat coat. It protects the paint and then you can layer over.

@clintlucas7604 2 года назад

Also before priming, I use a very light coat of water and Dawn to wash the model to clean any body oils from the hands. After maybe use latex gloves.

@JohnVanderbeck Год назад

I'm much more technical than artistic, so I can't help be wonder if there isn't just a set ratio of these colors that could be worked out then be done consistently in batches when needed? I mean if the pigments from the individual bottles are consistent then the mix should be as well, right?

@TheCreativeCollector Год назад

You should be able to do that. I just like to mix my own for the specific character.

@johnhughes1385 2 года назад

Your washing and shading techniques. Do you use the same technique when youre painting arms and legs. Whennyoure trying to accent the lines or muscle tone

@TheCreativeCollector 2 года назад

Basically. Its a little different when using an airbrush vs a regular brush. I'm about to make a video on doing this with a regular brush.

@johnhughes1385 2 года назад

@@TheCreativeCollector awesome. I look forward to that. Im glad youre making these. Alot.of videos ive seen about making hyper realistic flesh tones on models. They just show the colors and then do.it. they dont go into detail of how or why they are using each technique and shades

@TheCreativeCollector 2 года назад

Thanks John. I think its important to fully show the process or no one will retain it.

@peterpan107 2 года назад

Hey bro u help alot I have a question how many resin printers do u use?

@TheCreativeCollector 2 года назад

I use 4 resin and 1 FDM.

@fuckhandlr Год назад

Great painting. What do you use for the sealer?

@TheCreativeCollector Год назад

Krylon Color Maxx flat

@gjohnson5978 2 года назад

How would you mix for darker skin like Falcon

@TheCreativeCollector 2 года назад

You could add just a little brown at a time till you reach the tone you want. You'll have to add a little more red too.

@gjohnson5978 Год назад

What is the mixture for your big bottle of pinkish undertone...Where did you get that amount of paint to make it...

@Bricks1226 2 года назад

What airbrush do you use?

@TheCreativeCollector 2 года назад

I use several but in this video I was using a cheap one I have a link for in the description.

@clintlucas7604 2 года назад

I watched a video on Sideshow Collectibles that did the red, yellow wash tone..they also used blue. I think it was Superman. Check it out! I've done it and it's a good process. Thanks for doing it!

@TheCreativeCollector 2 года назад

Yes I saw it as well. I use the method sometimes, but I'm always experimenting with different ways to get the perfect skin tones.

@timbuktu8069 Год назад

Thank you, Thank you, Thank you, for using real color paints! I am so tired of tutorials that use "Gobin vomit" and "Zombie fingernail" for the pallete.

@jasoncorbett8312 7 месяцев назад

You ever try a Jenna Ortega as Wednesday model? From certain light it looks like her skin is a kind of purple. What would you do for pale skin like that?

@TheCreativeCollector 7 месяцев назад

I haven't yet but I plan on painting a Wednesday model soon. And you're right, there is a purple hue to it. I would probably mix some into the base tone and lighten it up with a warmer tone from there.