How I Use My Favorite Bits with Dremel

Подписаться 83 тыс.

Просмотров 225 тыс.

50% 1

kutzall.com/?aff=37
USE CODE: CARVINGAS to save 5% on burs and disks
Extreme bit: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Taper-burr: kutzall.com/collections/burrs...
Sphere-burr: kutzall.com/collections/burrs...
Cylinder-burr: kutzall.com/collections/burrs...
Original flame burr: kutzall.com/collections/burrs...
Original Dove tail burr:kutzall.com/collections/burrs...
Original Root Saw Burr:kutzall.com/collections/burrs...
BenQ LED Desk Lamp with Swing Arm: amzn.to/2NwLySP
Diamond bit set https: amzn.to/3fy4USn
amzn.to/2WXwMZS
Rz Dust mask:kutzall.com/collections/gear/...
Keyless Chuck for Dremel: amzn.to/3Cekj45
Dremel Flex Shaft amzn.to/2DmcFKQ
Dremel 3000: amzn.to/357n5tW
Dremel 4000: amzn.to/3rXpgZS
Foredom tx: amzn.to/3bxVMdh
Foredom Speed controll: amzn.to/2GnaPLl
Handpiece, No.28, Tapered, w/ 1/8in. & 3/32in. Collets - H-28: amzn.to/3qKmAOI
Central Machinery 2 HP Industrial 5 Micron Dust Collector: amzn.to/2DwfRnT
Dremel High Speed Steel Cutter : amzn.to/3veVSQE
Carbide Burr Set : amzn.to/38bqPfm
Abrasive 4 Roll Multi Pack : amzn.to/3b7EoxL
Painting Brushes, 20pcs : amzn.to/392Zb32
Watco Rust-Oleum Danish Oil Wood Finish: amzn.to/35gWY2J
Watco Danish Oil Wood Finish Black Walnut: amzn.to/38lQK3S
Undrilled Imitated Pearl Acrylic Beads: amzn.to/3s2Iopk
Minwax Tung Oil: amzn.to/3tuq2OY
Rit DyeMore Liquid Dye, Racing Red: amzn.to/3rVDuKb
Colwood Woodburner: amzn.to/2P3EhXU
Wood: Cedar
#CarvingandSuch
If You Like To Support My Channel. 👇
www.paypal.com/donate?busines...

Опубликовано:

15 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@TheFreshSpam Год назад

Got a dremel for my birthday and bought a load of shaped bits. Cant wait to use em. This video helps visualise how each part can help gauge, carve and detail your model. Thank you for this video

@carvingandsuch Год назад

Glad it was helpful. If you need help just let me know.Thx

@debo0757 2 года назад

NEEDED THIS VIDEO, THANK YOU

@carvingandsuch 2 года назад

Glad to hear that 👍👍

@sanjaycolaco 2 года назад

Thank you for this video - to see the rotary burrs in action - doing their various roles. This is surely a helpful video.

@carvingandsuch 2 года назад

Glad you like it. Thank you.

@Rigus208 2 года назад

Wow what a great way to demonstrate your talent and the tools to you. Thanks for your passion.👍😇

@jayc3110 2 года назад

That was a very useful demonstration off your favorite bits. Thanks, and best wishes.

@Zie_carpentry 2 года назад

Thnks for watch

@suecollins3246 Год назад

This is _such_ a good idea, demonstrating them like this!

@carvingandsuch Год назад

Glad you like it 👍

@Chestnie_otzivi_ot_borodocha 2 года назад

Очень красиво и оригинально сделал. Это видео дало мне понять что можно сделать красоту из всякой мелочи и безделушки. Спасибо мастеру🤓

@michaellafleur2077 2 года назад

Lajos this was a great tutorial for people to see what to use. Awesome job on the carving love it my friend. See you on the next one. Great sound track also.

@carvingandsuch 2 года назад

Thank you. Glad you like it 👍

@jefferyhines6067 6 месяцев назад

Thank you for sharing this helps alot, nice job on the woodspirit

@carvingandsuch 6 месяцев назад

Glad to help

@MerrylBustin 2 года назад

I gotta say, you make it look sooo easy!! Well done sir!

@carvingandsuch 2 года назад

Thank you

@Zie_carpentry 2 года назад

Hello friend

@jeromvaleska8471 2 года назад

Grande sensei. Cada vez que bajas un video aprendo mas .Muchas gracias por compartir tu don 🥂🇨🇱🤟💖💐

@carvingandsuch 2 года назад

Great to hear that. Thank you 👍

@delbertsmith1382 2 года назад

Great video, awesome carving

@Rigus208 2 года назад

Wow thanks for sharing your talent .great way of showing us what to use .👍😇

@south_coast_tackle 7 месяцев назад

Thanks for the video. I see a lot of creators showing us WHAT they make but not HOW they make it. A video series on burrs/bits and how they are used would be very helpful. Things like what bits to use when making eyes, or hair/fur, or feathers. We appreciate all the info you're sharing. Thanks again!

@carvingandsuch 6 месяцев назад

Thank you 🙏

@paulgagie3159 2 года назад

Brilliant just brilliant, thank you.

@debbyball8201 2 года назад

That was very useful. I found bits in some jewelry and wasn't sure what they were for. Cleared that up. Time to play, thanks

@carvingandsuch 2 года назад

Glad you like it 👍thx

@maq2054 2 года назад

Brilliant, thank you.

@maxgc9267 2 года назад

très joli résultat.

@MultiTom1956 2 года назад

Lajos, great tutorial as always 👌 my proxxon shaft had a problem it's given back for repairs ( sad) 😄. Thank you so very much 🙏

@carvingandsuch 2 года назад

😱 what happened with the shaft?

@MultiTom1956 2 года назад

@@carvingandsuch when it's stretched it works and when you try to change the position it stops spinning 😬. I think the inner coil has a problem , the distributor has taken it back and promised that they will repair it - about 1000kms from where I live 😃 thabks Lajos for inquiring about it 🙏

@mocthucongmini4919 2 года назад

You are very smart and creative

@mervsilis6419 2 года назад

Very nicely done.

@lindalrb3864 2 года назад

Ok, I'm inspired. I just went and bought a dremel with the flex shaft. I'm 62 and always wanted to carve something. Hoping I'm not too old to try. I'm going to try some fishing lures. I have tried my own flies for years. Blessings

@carvingandsuch 2 года назад

That’s great to hear. Of corse you never to old trying out new things. Have fun wear eye protection and dust musk. Happy carving 👍👍👍👍

@Mr._Lister_The_Sister_Phister 2 года назад

You've gotta be careful, depending on which model you bought. Some of them have in-built safety sensors to detect if the tool is being held by a child, in which case the tool will not be able to start. However, a specific component of the sensor array called a "Streppleprump-Buckshank incapacitor" can be extremely dangerous. Somehow, the sensor array malfunctions if it detects a person OVER a certain age, 60 i believe. Rather than disabling the tool as it would with a child, your tool will run seemingly normal. For a while, that is. Suddenly and without warning, your tools Peenock processor will determine your age based on how much Age radiation your hand emitted while holding the tool. If it detects that its user is age 60 or older, the tool will without warning explode extremely violently, killing the user and maiming/disfiguring nearby family members. This makes using certain Dremel models a game of Russian Roulette, and unfortunately there is no recall, fix, or anything else. The best you can do is to learn your tool model ASAP, and not use it for ANY reason until you can determine how heavily your body emits age radiation. This is a life-or-death scenario

@nomad_woodmizer696 2 года назад

Very cool! I always wish I had nice small tipped burrs like these, are those diamond burrs?

@carvingandsuch 2 года назад

some of them diamonds and also a few carbide ones too. thx

@couerleroi1 Год назад

Artist!

@carvingandsuch Год назад

Thx

@organicpoggiagliolmi4887 2 года назад

Amazing.

@paulmorris6177 Год назад

Thanks for the demo, that was VERY informative...but those same blades react VERY differently on the OPPOSITE side of the wood grain. It would be helpful to demonstrate how to use those when going AGAINST the grain (and rotation) of the various bits. I've had some difficulty controlling the Dremel/bit when I am going in either the opposite direction or on the other side of the face...thanks!

@carvingandsuch Год назад

It’s the same. Only reason I showing one side this time because If I do the opposite side it will be up side down and looks not good on a demo video. Also harder to follow the steps. Thx

@desertsmeagol7073 2 года назад

Yooooo thanks for replying to my comment! Much appreciated lol

@carvingandsuch 2 года назад

👍

@arnauddoremus8704 2 года назад

Magnifique

@kjirstenboucher9682 3 месяца назад

Great video.😊

@carvingandsuch 3 месяца назад

Thanks for watching

@Raphstav Год назад

Great video thanks, it helps so much to see you sculpt to understand what these tools are doing exactly. I use mainly olive wood which is a very hard wood. I find it takes so much time to carve, and I probably have the wrong dremel bits... That's why I'm looking 😊 Do you think I need to use a higher speed?

@carvingandsuch Год назад

I never carved olive wood. But I did some drift oak. Also hard and the higher speed just burned my Kutzall bits. I bought a powerful foredom tx and at mid speed with that high torque solved my problem. Hope this helped. Thank you and happy carving.

@Raphstav Год назад

@@carvingandsuch thank you so much for your reply and advice. Drift wood is also very dense and hard!! But beautiful. Take care and keep up with your work.

@maxpower5342 2 года назад

ERES UN ARTISTA.......HACIA 20 AÑOS QUE NO TALLABA MADERA Y ME COMPE LA DREMEL 4000, UN A MARAVILLA...TENGO UNA DUDA COMO CEPILLAS LAS ESTATUAS CON QUE ACCESORIO? TE FELICITO POR TU TRABAJO ME HAS INSPIRADO Y LO AGRADEZCO

@carvingandsuch 2 года назад

Thank you

@AA_architektur2075 2 года назад

Hi. Tank u for this amazing video. What's wood name?

@carvingandsuch 2 года назад

Thank you. It’s hard to tell what type. It’s an old table leg 😉

@chuckswain8299 2 года назад

I have a Dremel tool I use to use for cutting ho railroad track and tips of nails and screws flush with wall or wood. I have never carved with it. Would like to learn. Where do you get your wood to carve on?

@carvingandsuch 2 года назад

I use cedar or poplar from local hardware store. Or just look for furniture on garage days and grab the legs😉. Online you can buy cottonwood bark. Hope this helps. If you have questions let me know 👍

@bigseanSM 2 года назад

So cool 😎 where do you get your dremel bits from?

@carvingandsuch 2 года назад

Usually Amazon or Lowes thx

@beautybeyond5037 2 года назад

Very cool

@stelakis1959 2 года назад

1.000.000.000................bravo .bravo ....from greece........

@carvingandsuch 2 года назад

Hello from Florida 👋 Greece is a very beautiful place.👍

@MadebyKourmoulis Год назад

My hands can do this. But I don't understand how you can see that in the wood when you start carving. Is it just experience or is that a natural skill?

@carvingandsuch Год назад

I have a picture in my head but what o wanna do and during the carving process it’s changing sometimes. Just start your carving and you will see what’s going to happen 👍

@MiraX871 2 года назад

Beautiful work and wonderful machine! It looks like to work with pencil.

@carvingandsuch 2 года назад

Yes that’s why I like it. Thx 👍👋

@leliomartiradonna6267 2 года назад

Please, could you tell me what do you use at the end as liquid. Thank you.

@carvingandsuch 2 года назад

Sure I can. Tung oil.

@estebanjimenez7314 2 года назад

Donde puedo comprar un equipo como este?

@karenheaverlo6454 2 года назад

So amazing

@Zie_carpentry 2 года назад

Yesss sir 😊😊

@cathyfarley6025 2 года назад

Bravo

@lilithdablo5152 2 года назад

Very beautiful. I wanted to buy a rotary. Is Dremel 3000 good enough to do such beautiful things? Did u have experience with using other brands rotary? What could u advise for a beginner?

@carvingandsuch 2 года назад

I believe you gonna be more than happy with the Dremel 3000. I have the Foredom too , very powerful end great tool when I using harder wood. Thank you

@lilithdablo5152 2 года назад

@@carvingandsuch thank u for your advice 💗

@AdamWiktor 2 года назад

Hi. where to buy the first cylinder as shown in the video. or what's his name. I am Polish and I cannot find it

@carvingandsuch 2 года назад

You can find the links in the description. Hope this helps

@AdamWiktor 2 года назад

@@carvingandsuch Thank you, I already have. What is the last finishing tool called? or where can i get? Please send me a link or a name. I live in Poland. Maybe I can find it

@AdamWiktor 2 года назад

@@carvingandsuch 8:15 Please write me what this bit is

@anniepayet4771 2 года назад

Very nice ! I speak bad english, pourriez vous me donner les noms des 3 embouts utilisés please ? I try can you give me the name of the tree woods you utilize with the dremel to sculpt ? thanks

@carvingandsuch 2 года назад

The threes are I using mostly cedar and poplar.Started carving cottonwood bark not long ago. Hope this helps

@Raphstav Год назад

@@carvingandsuch Hi, I think she was asking about the name of the drill bits that you use to carve.

@SP4Parks 2 года назад

Do you use or own a Micro carver such as a Ram etc. ? Is you son learning to carve?

@carvingandsuch 2 года назад

Never used a micro carver. My son so busy has no time sitting with me and do any woodwork. 😢😁👋Thank you

@madeiraforte 2 года назад

Hello friend, it was very top, my congratulations, I'm from Brazil and your video arrived here

@carvingandsuch 2 года назад

Glad you like it. Hello from Florida 👋

@4759690 2 года назад

beautiful

@ostogart 2 года назад

👍👏 Wowww cool. Thank you 👏👍I just subscribed your channel.

@carvingandsuch 2 года назад

Glad you joined 👍thx

@islamkamel496 3 месяца назад

What kind of this wood?? U R real artist 👌🏼

@carvingandsuch 3 месяца назад

I really don’t know. Some old parts of a furniture . Thx

@islamkamel496 3 месяца назад

@@carvingandsuch thanks

@marcelaonastacio2666 2 года назад

👏👏👏

@erikfritts8240 2 года назад

I didn’t see a speed dial on your dremel. I have been whittling and thought about using my dremel just never used it for wood and not sure what speeds are good for carving.

@carvingandsuch 2 года назад

Usually between half to full speed also depends on bits, and wood hardness but you will figure out easily

@erikfritts8240 2 года назад

@@carvingandsuch thanks going to experiment on some different wood pieces tonight

@suecollins3246 Год назад

Erik, the speed gauge is on the actual main body if the Dremel - that's the flexi-shaft he's using.

@manojraval.311raval2 2 года назад

Super duper 💐

@moniquebrown1094 Год назад

I looking for a wood carving set that fit in my dremel, can you help me i bought a set but bits coming out,... I have kutzall but for the finner work I looking for a set thank you for your help I have a dremmel with a flex connected

@carvingandsuch Год назад

You can use a chuck to if you have different size bits and makes the changes very quick and easy. Beside my Kutzall i like to use carbide bits and just a few diamond bits for finishing up.

@moniquebrown1094 Год назад

@@carvingandsuch thank you so much 😊 I precede this a lot :)

@carvingandsuch Год назад

If you need help don’t hesitate and shoot me an email