How is this only $300?! Elegoo Saturn 4 Resin 3D Printer

Подписаться 497 тыс.

Просмотров 67 тыс.

50% 1

Checking out the brand new Elegoo Saturn 4 Resin 3D Printer for a shocking $300 price tag!
Thanks to Elegoo for Sponsoring today's video!
Saturn 4 Ultra $400 - bit.ly/Saturn4...
Saturn 4 $300 - bit.ly/Saturn4UJ
Neptune 4 Plus - bit.ly/Neptune...
Neptune 4 Max - bit.ly/Neptune...
New PLA Colors - amzn.to/3tKK24A
Neptune 4 Pro $299 ➜ bit.ly/Neptune...
Neptune 4 $259 ➜ bit.ly/Neptune4
NOW ON AMAZON ➜ amzn.to/44kLsiJ
Mars 4 Ultra $309 ➜ bit.ly/Mars4Ultra
amzn.to/44TKn1r - Amazon
Mars 4 $259 ➜ bit.ly/ElegooM...
Saturn 3 Ultra 12K $499 ➜ bit.ly/Saturn3...
Saturn 3 12K $399 ➜ bit.ly/ElegooS...
Files from todays video
Miniatures by Loot Studios
lootstudios.com
HellDivers & Mouth of Sauron Bust by Fotis Mint
thangs.com/des...
Knight of Action by Witchsong Miniatures
www.myminifact...
MY PATREON / My 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resi...
Some links on this page are affiliate links that help out the channel.
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoff...
_______________________________________________
Gear I'm Using ➜ www.amazon.com...
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
RU-vid ➜ / unclejessy
________________________________________________
Thanks for watching!
#3DPrinting #Saturn4 #UncleJessy

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 225

@leelatt 3 месяца назад

I'd love to see a timelapse of the 4 generations of saturn printing side by side the same print to see how much improvement there's been. I've had nothing but issues with my Saturn 2 and really leaning towards upgrading.

@hofx666 3 месяца назад

I love the Saturn 3 and don’t see how this new one can top that. Especially with the Saturn 3 and rapid resin. 8 hour prints have been done in 1.25 hours with zero defects.

@leelatt 3 месяца назад

@@hofx666 If I could afford to upgrade I would, I've had nothing but problems with my Saturn 2.

@erickraus1256 3 месяца назад

@@leelatt What problems are you having? Mine have been printing great. I use my Elegoo Saturn 2s much more than I use my Phrozen Mighty 8K.

@leelatt 3 месяца назад

@@erickraus1256 Constant failed prints, either stuck to FEP or 1/2 through printing they are missing portions. Had several that warped and a few that split open/have gaps in layers. Had one where it decided halfway through a print to start the print over. I'm using the Loot Studios minis.

@trzarector 3 месяца назад

Buying 3D printers is addictive. Price is crazy on this. I already have Saturn 3 ultra and Jupiter SE but really need more build volume so I’m looking at that Mega 8K S.

@AA-xm7rt 3 месяца назад

I bought my first printer 2 weeks ago and I'm mentally filling my house with printers already xD

@trzarector 3 месяца назад

@@AA-xm7rt I was the same. Bought the Saturn 3 Ultra just before Xmas and by February I also had the Jupiter SE! Now looking at the Mega 8K S!

@AA-xm7rt 3 месяца назад

@@trzarector very cool! I have a Bambu printer so not a resin printer but I would also like a resin printer because I want to create a board game and make the most important stuff like the characters and structures on the map out of resin because of the high detail.

@trzarector 3 месяца назад

@@AA-xm7rt I can highly recommend jumping in! I love my resin printing even with all the other inconveniences that go with it. The output quality can't be beaten though and more than makes up for any shortcomings.

@erickraus1256 3 месяца назад

The Mega 8K is nice (it is HUGE) but I've had more problems and failed prints with that than all my other printers, probably combined. Also, the "swiss cheese" build plate is a PITA to remove rafts/feet from because the cured filament gets into the holes. I have no idea why Phrozen did this and continues to do it on the 8K S and the 8K V2.

@abovewongart 3 месяца назад

wow! the printer looks so sleek and bootiful

@brendanarmstrong7802 3 месяца назад

5:25 - Wasn't the original Saturn more like $700? And people during the leadup to the preorders were laughing at me for hoping it'd come in under $1000, back BEFORE it was announced that it'd be coming with a mono screen. We've come a long way in the last 4 years.

@andrewmcmillan229 3 месяца назад

I have an original Saturn and paid $500

@B143DP 3 месяца назад

You may be thinking of the Jupiter having the 700$ pre-order/kickstarter price. The Saturn was around 500-600$ when it released originally.

@heymannhowru 3 месяца назад

Yeah I paid 500 for my Saturn S... I am not complaining at all about these new prices as I just preordered the pro and selling my saturn s for 200

@B143DP 3 месяца назад

@@heymannhowru Yeah I ended up getting 3x 4 Ultras to add to my print farm, not complaining either as my printers have well since paid themselves over multiple times XD

@brendanarmstrong7802 3 месяца назад

@@B143DP Yeah, I bought mine through the kickstarter, so that's what I've always thought of as the original price.

@3DWithUs 3 месяца назад

Can we somehow print the anti-dripping tray that is included with the Saturn 4 Ultra? Is there a file available? I am sure any large FDM printer could handle the task.

@jasoncombs3232 3 месяца назад

I want a tray that doesn't say Elegoo across it and is easier to clean.

@HoaPham-zs1mh 3 месяца назад

Dude it was only a year or so ago I got a Saturn 2 for 500, printer tech is moving so fast!

@bacawaka2813 3 месяца назад

I got my Saturn 4 Ultra Yesterday! I must be an early preorder hence why I got it so soon. Already started using it. Much more convenient. Kind if with I could have got 2.

@erickraus1256 3 месяца назад

They ship out pretty quick. I ordered mine yesterday and it will arrive in two days from now. Unfortunately, I got the 4, mainly because of the green lid, but also forgetting about everything else that comes with the Ultra. Now I'm contemplating buying the 4 Ultra and sending the 4 back..

@chrishummel 3 месяца назад

"Wish it had a handle" Says the guy with like 50 machines that can make a handle XD

@ippaku 3 месяца назад

Honestly, honestly, the only thing that stopped me from getting the ultra for is the Saturn 2 8k is still an amazing printer that works. If they came out with a version that had the moving that for the Jupiter series with larger build volumes, I could see upgrading, but I’d also need a larger wash basin type problems. Wishing everyone a happy weekend. Thank you Mr. magneto for the video, be well be you

@krillin6 3 месяца назад

The Saturn 3 Ultra is much better than the 2, but you can skip the Saturn 4 Ultra, I have mine and it's underwhelming. This "reviewer" sugar coats these reviews to the point I'm diabetic now.

@erickraus1256 3 месяца назад

@@krillin6 Can you elaborate on how/why it is underwhelming?

@ArtByAndy-z2m 3 месяца назад

I just took your advice from an earlier video you did where you put 3M handles on your Saturn 8K and Curing station lids. I put one in the lower right of my Saturn 4 Ultra. Black on Black does not detract from the look of the printer, and it works great.

@ryankyle2467 3 месяца назад

I know this is probably just me….. but 1 things I would have loved for you to have done is, tried to make (let’s just say) a piece of terrain in 1 piece as big as you could and then had that again a model or miniature from a mini game where if people play that game they could visibly confirm the size!?! Like maybe SW Legion or WH 40K!?! Mainly because both of those printers look huge! But the biggest model you made, I could have made the same thing in 2 pieces off of my printer! And I don’t think mine is even half the size of both of those!!!

@UncleJessy 3 месяца назад

Oh love that idea and will try to do that soon

@my63stingray 3 месяца назад

I am printing on mine right now! Forst time resin 3d printer here and i was blown away how easy it was to get to print. Still, like the fdm print is done, it's done, but i am looking forward to seeing what this machine can really do!

@lunacrescentnightshado Месяц назад

What file do you need to print with?

@KruellNationGaming Месяц назад

I have the ultra but I like the coloring of the regular more.

@bebo6750 3 месяца назад

I was in love when I first saw the Saturn 4 Ultra for the camera and the ia, but I ended preordering the Mono M7 Pro!

@Valandor_Celestial_Warlock 3 месяца назад

About that handle... don't you have a 3D printer you could maybe print a handle with? 😆

@Foxtrot_Woof 2 месяца назад

I have the OG Elegoo Mars with the RGB screen. It might be time to upgrade.

@EyeXombie 3 месяца назад

How do they miss something like a handle? Did no one use the thing while testing it? lol.. Ordered an Ultra! Hope it ships soon!!

@UncleJessy 3 месяца назад

I mean it is easy to lift the lid but at the same time... still needs a handle ;)

@erikm9768 3 месяца назад

Maybe aesthetics would suffer?

@atlas6538 3 месяца назад

3d print yourself a handle and glue it on the side

@bryanfoster362 3 месяца назад

I noticed the green one tilted back on you when you tried to lift the lid. That could have been messy had there been a full vat of resin in it. That to me is an excellent reason for a handle.

@atlas6538 3 месяца назад

Wow, as a Saturn S user, this seems like such a massive upgrade

@TheRelentlessAssault 3 месяца назад

As a mars 3 pro user this is a colossal upgrade lol

@GeekDetour 3 месяца назад

Hi @UncleJessy - I totally agree with you: the DripBib should be included in both printers - oh, Gee, and definitely the exposure test functionality should be there too... I hope they implement that also on the Saturn 4! The Ultra is my recommendation - I think the extra 100 bucks are totally worth it. About the handle: there are a few available for you to choose from. My first design you need to drill two M3 holes - but I also included an "adhesive" version that is my recommendation for anyone that could be undecided about a permanent mod. There are handles from other RU-vidrs too.

@IgnusFast 3 месяца назад

Honestly, I'd just stick a command hook on there and call it done. :)

@GeekDetour 3 месяца назад

@@IgnusFast Ha ha! Oh man… but where is the pleasure of over engineering something yourself? 🤣

@rungunninja1289 2 месяца назад

Printer works great but the auto sensors outside of leveling cause several problems with it not even wanting to print. If I was Elegoo I make a by pass option on something like the maximum resin detection immediately

@Goosefang 3 месяца назад

Not into resin printers yet, but I’d want the ultra with the green lid. Looks so much cooler

@VampireOnline 3 месяца назад

Those are also the pre-order prices. You may have said it and I missed it, but it does look like they have the full prices listed now. Still awesome deals! I'm going to have to get my 1st resin printer as I don't want to pass up $125 discount!

@krillin6 3 месяца назад

He uses kids gloves with reviews. I'm not surprised. He knows who butters his bread.

@farplaine 3 месяца назад

The ultra is a no brainer vs the regular Saturn 4. I mean if money is tight then sure the standard model is still ridiculously good, but that tilting vat is worth the price of admission alone for the ultra

@leckerhamster9047 3 месяца назад

Your printer got a crack in the front of the cover exactly on the same position i saw a few other ones...seems to be a weak spot in the production.

@daskrispysquivvel3120 3 месяца назад

I found the order for my original Anycubic Photon I bought in 2017. With delivery it was only $20AUD (yes twenty dollars ...) cheaper that what I just paid for the Saturn 4 Ultra + delivery! ($627 Oz dollars for the Photon - $647 for the Saturn 4 Ultra...)

@UriskOfTheFae 3 месяца назад

It really sucks they didn't put the exposure finder tool on both printers. A real shame

@OnceinaSixSide 3 месяца назад

I'm actually devastated to find out that exposure tool hasn't been implemented here 💀

@ZeroAnkoku 3 месяца назад

Ngl I was getting ready in my bathroom and had this playing in my living room and though Uncle Jessy said "This awesome knight with a gigantic ass" lmao had to run back in to check.

@RollerCoasterLineProductions 3 месяца назад

I’ve never heard of a resin printer before, had to look it up. Looks cool. I’m new to 3D printing, bought myself an X1C w AMS and haven’t looked back, sure is addictive

@jacobside2656 3 месяца назад

And here I am with an original Saturn that I bought for $200, 2 years ago, still sitting in the box.

@MonkeyButlerLabs 3 месяца назад

Twinsies. Can't get myself to set up the infrastructure for resin. 2 printers and a wash/cure station. NIB.

@RangerChris61 3 месяца назад

Is amazing how much the price has come down on these printers. While I don't have any plans to get a 4/4 ultra, as I am not a fan of some of the changes that they made, I am looking forward to what they do with the Saturn V. Also if they don't do a tribute version or the ultra version in classic NASA paint scheme I will be very disappointed.

@jamesbullo 3 месяца назад

Saturn 4Ultra looks like my next 3D printer!

@satgod 3 месяца назад

A heater and auto fill would make it about perfect

@Lilrockerdude13 3 месяца назад

First I'd like to thank my wife for letting me take up space all over the house. Surprise surprise, I'm bringing another printer home 😅 even if she don't know yet. Second I'm sold on upgrading from my Mars 2 Pro! Ordering during my lunch

@HouseProjections 3 месяца назад

Received my 4 Ultra yesterday and I love this thing. HOWEVER, I am having issues with half the build plate not adhering to anything. Running a 6 zone calibration only yields 4 models with 2 stuck to the film. Over and over again. I changed models, slicers, resin, film twice, cleaned the build plate every time, etc. I now see a few other posts on reddit mentioning the same issue. Have you experienced anything similar? I'm sure it's going to be a quick fix and it hasn't changed my opinion in the SLIGHTEST. My biggest problem? My first few successful resin calibration prints were so damn good it was difficult to choose the best exposure time!

@7kortos7 3 месяца назад

this just sold me even more on the Ultra lol

@Cyrilcynder1 3 месяца назад

I got the original saturn like RIGHT as it came out, it was indeed $500. I gought another about a year and half later, it was down to $250.

@enricobononi8655 3 месяца назад

the new bed design is a giant PIA to clean and the absence of an integrated heater are a no go for me....waiting the Saturn 5 maybe they manage to put all the essential in a printer

@nikolasvasiliou280 3 месяца назад

I wanted to see the difference of microscopic detail !!

@thrrax 3 месяца назад

0:35 That was almost a resin spilling accident.

@OperationBaboon 3 месяца назад

I think it is time we go twice vat the size... with double interlocking plates, built-in heaters, fans and an automatic refill (outside) system. And wing folding doors. for 800

@UncleJessy 3 месяца назад

The heck are double interlocking plates? Why not 1 big one? Really like all of these suggestions

@OperationBaboon 3 месяца назад

@@UncleJessy easier to move, store, clean etc. just an idea i head in my head

@volttherobot 3 месяца назад

We have a Phrozen Transform, but every use requires a saving throw...these two printers are soooo tempting...

@korixgaming5805 3 месяца назад

even at $400 Canadian its an amazing deal

@bountyhuntersgamingBHxG 3 месяца назад

Good review!!! Thank you!!! 💯

@blizatrex 3 месяца назад

The new hotness looks awesome. I noticed that the links for printers link to more expensive listings than what is actual. as one example your link has the pro 4 for 279 vs what the regular link is now of 239.

@DonsArtnGames 3 месяца назад

10:20 A handle on the cover 🤣... OH! What about a way to let completed prints drip drain unused resin directly back into the vat while another print is running!

@StyphalGaming 3 месяца назад

I received my Saturn 4 Ultra yesterday. Two out of two failed prints.

@bebo6750 3 месяца назад

Why?

@StyphalGaming 3 месяца назад

@@bebo6750 Build plate adhesion issues. First print a very audible popping was heard after every layer. It was the FEP sheet ripping away from the print.

@bacawaka2813 3 месяца назад

I got the saturn 4 yesterday as well. I had the opposite problem. I had a print really stuck to the bed. I reduced the 30 second bottom layer exposure about 10 seconds. Checked on a 1/6 scale print this morning and it seems to be holding just fine.

@StyphalGaming 3 месяца назад

@@bacawaka2813 Had some time over the weekend to try a few things. I switched to Elegoo ABS-like 3.0 which tolerates lower ambient temperatures and my adhesion issues have been apparently resolved. I suppose I'll wait until Elegoo ships the heater pre-orders to use my other resins.

@israelmartinez4097 3 месяца назад

I’m still waiting for my Saturn 4 ultra got a spot right next to my 3 ultra.

@GameUpOG 3 месяца назад

Got a question, I pre order the saturan 4 ultra but I'm not sure if the flex plate will work. The one I see from wham bam doesn't match the build volume on elgoo's site and I saw someone on a thread had trouble with flex plates in general for the 4 ultra. Do you know if there is a flex plate that will work on the saturan 4 ultra? I haven't used them before but would like to because I've never bought such an expensive printer before

@getbent57 3 месяца назад

They are set a super good price point.

@thediscoman2001 4 дня назад

i carnt eve get it to print anything apart from the test print, mine keeps coming up with resin exceedes etc and its well below the rein line mine is the 4 not the ultra

@justintime5021 3 месяца назад

Man i really want that saturn 4 ultra.... Unfortunately (or fortunately i guess) my saturn s still works like a champ. I have no complaints... And i have no need or room for a second printer

@BmadCreative207 3 месяца назад

id love to get an ultra to start my journey in printing.. but I will probably never get into it like I wanted

@CharlieStalk 3 месяца назад

Time to upgrade from my original Saturn. Great video mate.

@krillin6 3 месяца назад

Honestly, the Saturn 3 Ultra is better in many ways to the S4U. I have both, and had the original Saturn, too. S4U has pain points he isn't covering, trust me.

@Gannon2145 3 месяца назад

Rochester shout out

@u2cantsee 3 месяца назад

Wow, it's a no brainier getting the Saturn 4 Ultra instead of the Saturn 4. You can't beat the price. Does it use a FEP sheet or FPA sheet?

@remiilatte 3 месяца назад

Why don’t you 3D print the drip tray?

@demonhogo 3 месяца назад

now i'm struggling between ordering the saturn 3 ultra or the saturn 4. Or just biting the bullet on the saturn 4 ultra. Help

@WARPAINTandUnicorns 3 месяца назад

I feel like everyone will want to get a suction cup handle for the lid.

@teyrasiridae4704 3 месяца назад

I asked them for firmware with the RERF functionality weeks ago already =/ It's such a nice feature to have

@Grayhammer 2 месяца назад

what are you using to wash and cure?

@killmonger_990productions 3 месяца назад

What website do you use for 3D print files?

@SergioJimenez7493 2 месяца назад

MyMiniFactory is the one I look up to for quality miniatures from different creators. For more generic purposes, including FDM printers, Printables and Thingiverse are cool and a lot of models are free

@sugarandcyenide2084 2 месяца назад

Thats $USA btw everyone lol.

@vankesselable 3 месяца назад

I wish Saturn makes one that is a bit higher .

@marktadlock5428 3 месяца назад

How about 3d printing a drip tray

@Thanos88888 3 месяца назад

I preordered the ultra around a month ago. I'm hoping it comes in soon!

@FelipeAsprillaO 3 месяца назад

At this moment elegoo does not have the dip tray on their store.

@Namtar3D 2 месяца назад

Someone knows the settings for Elegoo Water Washable Ceramic Grey? I Bought Saturn 4 and can't print anything. It looks like it is working but after 3 hours of working, nothing appears in the bed. So weird. Please help, I am a little desperated.

@privatename7797 3 месяца назад

Uncle Jessy, can you solve a lot of reddit disagreements here and say if there is, or is not auto leveling? A lot of people online are saying it's only level assist, and not fully auto level. But Elegoo claims it's fully auto leveling. Thanks!

@exnuke7826 3 месяца назад

Hey not sure if you do already have a video on the subject or know of any but could you do a video on ventilation for Resin printers? I’m picking up one of these but iv always been curious on the subject and you always seem pretty knowledgeable.

@steamtraintom 3 месяца назад

Surprised it is still using PFA instead of ACF to get the faster speeds! And we are still missing all the features that were promised for the original Jupiter during the Kickstarter campaign and the wash and cure to take Jupiter sized prints as they kept promising!

@UncleJessy 3 месяца назад

I would seriously love a bigger wash and cure from elegoo. I think they ditched acf after all of the backlash last year. I believe fauxhammer has a videos doing print compares

@teyrasiridae4704 3 месяца назад

Not still. Again. They deliberately moved away from ACF for the Saturn 4 series.

@steamtraintom 3 месяца назад

Ahhh I didn't get to join the Saturn 3 crew :( I didn't realise they'd used ACF and come back away from it! This 4 Ultra is so tempting but I don't need another printer! 🙈 Nor have the space for

@Geeko170 3 месяца назад

Until I see how that heater works, I’m gonna hold off on another resin printer.

@camm4000 3 месяца назад

I got the ultra but the build plate doesn't slide onto the printer all the way. The thing won't clip into it.

@Drakonaut 3 месяца назад

Only reason I went for the ultra was the drip tray- among all the other auto detect features.

@jasoncombs3232 3 месяца назад

The drip tray is hard to clean because it says Elegoo across it... so stupid.

@KurayamiWinter 3 месяца назад

THe sad thing, I kinda like the green cover of the 4, but definitely with the price, just go with the ultra. xD (much later in the year though)

@JoonKimDMD 2 месяца назад

Why do we need heaters??

@DarthRukkus 3 месяца назад

so this is moving to start becoming like Formlabs printers.

@Toms_Channel 3 месяца назад

I got fed up with my fdm printer so i pre ordered the saturn 4 ultra. I’m still keeping the ender 5 pro for bigger, non complex prints, but i’m looking forward to fiddle with this machine.

@SergioJimenez7493 2 месяца назад

You should take the cost into account too, resin is WAY MORE expensive than filament. For bigger prints that won't need very fine details I would stick to FDM.

@spaycemuuse 3 месяца назад

Curious about any sort of fume extraction on these machines. Do I need to get an enclosure for it if I'm working beside it all day long?

@bronwynecg 3 месяца назад

Oh man! 😲 I’d get this in a hot second but I have zero space for it…

@nikolasvasiliou280 3 месяца назад

good evening can you make a video about jewelry thanks !!

@Real_Name_Redacted 3 месяца назад

Has the process of cleaning / processing the prints, changed over the past 5 or so years? I could never get the process as streamlined as I would like, which is part of the reason I got out of the resin printing hobby.

@erikm9768 3 месяца назад

Spec says its 55cm tall but whats the minimum clearance height needed to be able to open the 4 Ultra ?

@janineharris3601 3 месяца назад

Can this or what would you say for a person like me a beginner. I also live in a apartment small. So what would you say for me I like mini diorama. So that us what I would use it for. Do I need a washer and I forgot what else

@Mr360alan 3 месяца назад

can you buy the cam and just add it on to the 4 ?

@_droid 2 месяца назад

It's *really* bizarre when "makers" complain about a missing tray or lack of handles. I mean, come on.

@nobocks 3 месяца назад

Can you try to print model at ho scale or even n scale please ?

@TheRelentlessAssault 3 месяца назад

Can you instal a flex plate on a auto leveling resin printer? That’s my favorite feature of my regular resin printer is just popping that flex plate off and not having to take the whole build plate off.

@lewismcintyre9483 3 месяца назад

I've read people have been having print failures when trying to use a flexplate, apparently it thinks there is something in the way of the print

@StevesRealReviews Месяц назад

So you can't sit this by a wall with the flip top lip - HATE THAT!!!

@gmolanoart2996 3 месяца назад

Any wash and cure stations you recommend for this model

@jchamorrob 3 месяца назад

It did not have a odor filter included ?

@warwolf555 3 месяца назад

What do you do with all these test prints you make for these videos?? You've gotta have soooooo many at this point

@IN-FINITE_WISDOM 3 месяца назад

Hello! I've got a question, and it isn't related to the video. It does require some explanation. I happen to be a bit of a battery enthusiast, but glass jars and crude mockups, although fun, are not very practical. So I have been researching 3d printers and filaments. I doing so, I've found some filaments like pvdf and pps that I would love to use, however... the temp range seems just out of reach for consumer machines and is totally overkill for pro machines. (That I and most cant afford) I find myself in a valley and don't know where to look. Any ideas? I consider an older pro machine, but even then, the price and learning curve are steep as they lack the simplicity of use newer machines have. I understand this is isn't a simple question and a lot of variables apply. Any kind of Insight would be most appreciated!

@MrGTAmodsgerman 3 месяца назад

So many new printers coming every year. What happend to all the models that become outdated that fast and get sold somewhere?

@LordNerfherder 3 месяца назад

Paid advertisement. Horrible cleaning process is the biggest flaw.

@Ben-jk4fy 3 месяца назад

Is there still the issue of only chitu able to do wifi file transfer or is it possible to send lychee via wifi?

@PauliPrints 3 месяца назад

Got a question about the p1p companion Cube mod! I saw that you made the grey parts out of PLA, how did it hold up? Im planning to print it myself but I wanna cut costs. I already have grey pla but the creator recommended petg. What do you think?