How It Works-Adjustable Action Lattice Guitar|David Schramm Luthier

Подписаться 1,8 тыс.

Просмотров 1,3 тыс.

50% 1

#SchrammGuitars #DavidSchramm #ClassicalGuitar #luthier
SchrammGuitars.com
To Support the Channel:
Tip jar: paypal.me/SchrammGuitars
Website: SchrammGuitars.com
Here are how my adjustable action neck works on my lattice guitar builds. The design was inspired by my 2001 Greg Smallman guitar that drafted a plan of and has been the inspiration for my lattice guitars since 2004
DISCLAIMER: This webpage contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support this website and allows me to continue to make more guitar related content. Thank you for the support!
Strings I use on my guitars:
amzn.to/4850NH4 D'Addario EJ46 Pro-Arte Classical Guitar Strings
My favorite string winder:
amzn.to/3Lj9XWL D'Addario Accessories Pro-Winder - Guitar String Winder, Guitar String Cutter, Guitar Bridge Pin Puller
My original Online Apprentice Guitar Making Courses (Hauser style and Miguel Rodriguez) on CD-ROM can be purchased by following this link schrammguitars.com/Online_Appr...
Get a FREE no obligation quote for YOUR custom guitar build.
Email: dave@schrammguitars.com

Видеоклипы

Опубликовано:

4 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@garylane6868 4 месяца назад

Very cool system. Never heard of it before.

@schrammguitars 4 месяца назад

It's been in use for about 200 years, but this specific design was created by Greg Smallman and sons around 2000. I started using it in my lattice guitars around 2004.

@andorrasrevenge1683 4 месяца назад

I played a 2a? Hauser model Schramm once, it was amazing.

@schrammguitars 4 месяца назад

Thank you.

@agenuineg 4 месяца назад

Very cool video! Did Smallman influence the design of the similar Washburn series, by any chance? Those have a small but distinctive hole in the back just below the neck joint . . . it allows access for the Allen wrench to turn the bolt that pushes up against the strike plate which is built into the underside of the fingerboard extension. At least that's what I seem to recall. By any chance, would you think that such a system (with a bolt-on neck) could contribute to bad wolf tones on every C# of each string? Or is it more likely inside the body, loose braces and the like?

@schrammguitars 4 месяца назад

Neck not the issue for the wolf note. Try putting a ball of blue take at a 45 degree angle from the front of the bridge ends about 1-2". You can also touch that area and see if the note changes. Don't know about the Washburn.

@stupidbots2585 4 месяца назад

Thank you very much for explaining the system. Can you also tell us something about how it influences the tone of the guitar in comparison with a classical bound neck and with a stab system?

@schrammguitars 4 месяца назад

I've tested it. No difference what so ever in the tone.

@stupidbots2585 4 месяца назад

Thanks for this answer too. Cool! I was expecting some difference because of the variable contact surface between neck and fingerboard on one side and body and top on the otherside.

@alext8828 4 месяца назад

Just so you know; I have the speed cranked up to 1.75 X. You could hit the gas a bit. Truss-rod? Yes, no?

@schrammguitars 4 месяца назад

No, No need for one.

@hughmanatee7433 2 месяца назад

Couldn’t you make a second hole in the fingerboard and another Allen screw for a set screw that could be fastened from the top? You would need an inset nut in your neck block.

@schrammguitars 2 месяца назад

I don't understand your question. The retaining bolt needs to move with the neck. It doesn't clamp it down.