How Much Chain Can I Make in a Day?

Подписаться 2,5 млн

Просмотров 769 тыс.

50% 1

🌏Get Exclusive NordVPN deal here ➼ NordVPN.com/forge - It's risk-free with Nord's 30-day money-back guarantee! ✌
Thank you to NordVPN for sponsoring this episode.
Learn how a VPN works: • What is a VPN and how ...
OUR PRODUCTS: alecsteeleco.com/
INSTAGRAM: / alecsteele
ALECSTEELECO RU-vid: bit.ly/alecstee...
ALECSTEELECO INSTAGRAM: / alecsteeleco
LEARN BLACKSMITHING ONLINE: beginblacksmith...
PATREON: / alecsteele
Instagrams:
Alec: @alecsteele
Jamie: @jamie.popple
My name is Alec Steele and I am a 24 year old blacksmith. We make videos about making interesting things, learning about craft and appreciating the joy of creativity. Great to have you here following along!
If you want to get into blacksmithing or knifemaking, check out our Montana based online store where we stock a range of great metalworking equipment for these crafts as well as our work-wear line and other products: alecsteeleco.com/
Thank you for watching!
Alec
/ alecsteele
INSTAGRAM @alecsteele
FACEBOOK PAGE / alecsteeleblacksmith
MUSIC:
Epidemic Sound - goo.gl/iThmfx
-signing up at this link supports the show!
SoundStripe soundstripe.com?fpr=alec84
- signing up at this link supports the show!
MUSIC - goo.gl/iThmfx signing up at this link supports the show!
------------------------------------------------
AMAZON AFFILIATE LINKS TO GEAR I LIKE, buying here supports us:
--------------
CAMERA + MAIN LENS: amzn.to/2CrLyYP
WIDE LENS: amzn.to/2CsAZou
TRIPOD: amzn.to/2GpBX7f
MIC: amzn.to/2CrBmiQ
SD CARD: amzn.to/2sF0i7g
COMPUTER: amzn.to/2C4i0oo
Alec Steele Blacksmith 2022

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 886

@DjDolHaus86 Год назад

Your links-per-minute isn't as bad as you might think because if you were doing it professionally you'd have several pieces on the go at the same time which would severely reduce down time while waiting for things to get to temperature, there would always be a piece ready to be processed. How long your arms would hold up to the non stop workout is a different matter 😅

@Burden82 Год назад

and just doing open links for non-stop and then welding them shut at the same time connecting them together.

@Moondog-wc4vm Год назад

Too many irons in the fire? ;-)

@tissuepaper9962 Год назад

@@Burden82 yes, definitely better to cut all your blanks, then bend all the Us, then forge all the scarf joints, and finally weld together the chain all in one go. This would also allow you to have one end of the chain feeding into a bucket or something on the floor so you can work on the other end without having to finegle the tongs so much. Joining segments piecemeal like this was probably the best way to do it for this one-off video, but you can probably see how it would be more efficient to work from one end of a very long chain if this were what you did for your job.

@benadams5557 Год назад

Also I'd imagine you'd do cutting one day, shaping the next, and welding the third. Chances are even higher that apprentices would have done the cutting and shaping while a journeyman did the welds.

@baronvonfritz Год назад

@@benadams5557 I could imagine a master telling a hyperactive apprentice to bend U's, smash scarfs, all day, every day, for a month before even showing the kid how to weld. However, chain making would probably be epic weld practice for the apprentice, and if a link fails in testing, just make a new one before selling or delivery. A smithy probably had more than just one apprentice helping out as well. Hence so many "Smith" last names.

@frankwalker6984 Год назад

Since a chain is only as strong as its weakest link, now I'm very curious as to how consistent you got at your welds, @Alec Steele. How about making some links, having them pulled to breaking and seeing how much force is needed on each?

@AlecSteele Год назад

Great idea! I need to find a way to make a rig to test it!

@Worrsaint Год назад

Local engineering college probably has an instron. Basically measures force and how much it stretches.

@geoffrey6000 Год назад

@@AlecSteele Just use a come-along between two immovable objects. Should be enough to break a light chain like this one.

@blackoak4978 Год назад

You'd be surprised how many "immovable objects" become moveable when a chain and come along are applied to them

@geoffrey6000 Год назад

@@blackoak4978 i'm sure they could find something lol

@johnbarr9857 Год назад

i would like to see you strength test a couple of those links in comparison to a modern made chain. This kind of look back to what blacksmith had to do by hand before machines took over is always interesting as well.

@Vikingwerk Год назад

I read once that when factory welded chain first became available, old time farmers didn’t trust it, and thought it would be to brittle, and would temper it by wrapping the whole chain around an oak stump, and throwing it in a bonfire. Not sure how true the story is, but sure sounds plausible.

@GameCyborgCh Год назад

@@Vikingwerk instead of just hanging more and more weight from a conventionally hand made chain and a factory welded chain to see which hold more weight

@foldionepapyrus3441 Год назад

@@Vikingwerk Interesting, never heard that myself. I agree it sounds rather plausible, and as the end user of the chain I expect the farmers would far rather a weaker chain for being too soft over the brittle failure mode of snapping without warning while under less than the rated load... I too would love to see this chain strength tested - after watching Tod's Workshops Arrows vs Armour videos it was quite clear the forge weld at the socket of the arrow head was not reliably that good, but sometimes even when the shaft doesn't break either the heads survived, so at least some of them were good welds. This chain test would be an interesting and simple to quantify demonstration of just how reliable a forge weld is. Not of any direct comparison, but still an interesting data point towards understanding the results of those tests.

@ThistleForge Год назад

At Hereford college they test hadn forge fire welded chain links. I think we made the links from 10mm thick round bar. Made 3 links to fit in the machine and mine snapped at about 5 tons pulling force. A friends chain links snapped at about 9 tons. Other didn't even make it to 1 ton. It just depends how good the fire welds are so can be inconsistent results depending who makes the chain. I never seen them test a modern cabin to compare it with but that would be cool to see. Also our chain links were not hardened and only made from mild steel

@foldionepapyrus3441 Год назад

@@ThistleForge If you are only testing 3 links you made its really not enough to say anything - perhaps your 4th chain link would be the weakest link and fail almost instantly under load. Even a skilled craftsman will have some variation, as will the raw materials they are using - so really need to test at least 20 odd links to failure per smith really - enough to prove your bad links are within a reasonable spread to the best links possible, or the chain's rated load.

@theCodyReeder Год назад

You need prescription safety glasses. I’ll tell you they are so great I’ve started wearing them all the time.

@hanwenhengliu3776 Год назад

Whoa Cody's here too?

@corrpendragon Год назад

Hi Cody, good to see you out and about lol

@dillonvandergriff4124 Год назад

They make those? I need to see about getting some...

@awesomecronk7183 Год назад

I second this! Also hi Cody!

@ilikaplayhopscotch Год назад

I’ve never seen Alec either wear prescription glasses or take safety seriously.

@aserta Год назад

I make chains for fun from time to time, no particular reason (then melt the metal and start with bars again with some extra scrap) and one thing that makes the operation easier is to make a bunch of separate links then make more links to unite them. The idea being that you're not splitting your work method between the two types of ops in making a chain, you're only performing like - like operations. It gets downright therapeutic. edit:also, you don't move the whole chain. You get yourself a table with some nails in it, and use the nails to secure the chain up the table as you make them. You only move one finished link and one working link from the fire to the anvil. Moving the anvil closer and working the fire from over the anvil is also a good idea (table sits to the side you're more comfortable with. I put my anvil with the nose about center to the fire pit, table to the right of it and as i finish one link, as the fire heats the next prepped link, i move the chain one nail up.

@barnabyshearer6744 Год назад

Even if you can't cover your time, Etsy should more then cover fresh stock.

@TheScreamingFedora 9 месяцев назад

You should upload a video of this process if possible

@maciek19882 Год назад

An interesting chain of events

@S8tan7 Год назад

You're grounded for that pun

@chalkopirate Год назад

Yaaaayy very punny

@archangel1547 Год назад

Yet every link rings true.

@alecgladkov8573 Год назад

Nice

@Someone-ry1nh Год назад

@@S8tan7 Aren’t most people of Earth grounded?

@Crystalphoenix9 Год назад

Feel like I'm watching a video straight out of your first few years. This was great.

@mitchellbennett Год назад

except he would have worked midnight to midnight and made 187 links

@LittleGreyWolfForge Год назад

Even I remember then….

@MegaChrisb10 Год назад

You might even say it was a link to his past…

@paulwilson2204 Год назад

@@mitchellbennett Too true. 100 hours a week alec was a very young and determined man.

@thecheesedip Год назад

There's just something about the primitive smithing that I find more enjoyable to watch. Maybe bc I can trick myself into thinking, ".... yeah I could do that." 🤣

@xavtek Год назад

I hope you can make another chain with riveted links and test the strength difference with welded links !

@bryeuendo Год назад

i hope he makes an even amount if he does this LOL

@Kiertapp Год назад

Netter still: If you go to the effort of forging, make the chain out of one piece of steel

@MrNiccholas Год назад

This was your best video in a while!!! That doesn't mean I haven't liked your other videos, but this one was exceptionally great! I had never thought about how chain would have traditionally been made! It's incredible to go back and see how things used to be made before modern technology. I know it would take a long time, but I would be interested in seeing you make a primitive belt sander. Maybe do something like a petal lathe to power it?

@jaydendarrington7192 Год назад

Oh my gosh! And a primitive bellows and anvil. Just the whole nine!

@boxadmiral Год назад

I recommend adding a drop shadow or outline effect to text on screen. 1:30 When explaining the scarf process, I had to pause the video and increase my screen’s brightness to uncomfortable levels to read the black text on dark background. If you can do a thin white outline around black text, or even a black outline around white text, it will be much easier for your viewers to read.

@pistol0grip0pump Год назад

I really loved this video, this could be the beginning of a cool series of you visiting classic things that blacksmiths back in the day would be the sole source of and would be a construction of skill, where as now it's all done automatically, mechanically. I love that you talk a bit about the history, sometimes the invention/discovery that lead to the items creation. I wonder what other products / tools / fasteners etc would fall into that category? All the best Alec (And Jamie!) Here's to a better new year! :D

@pillowmanswe2350 Год назад

this is a great idea love it! i do viking era blacksmithing as my hobby it takes a while (im not nearly as good as Alec) so seeing him do stuff like this and struggling a bit is great

@josephmurray1281 Год назад

I really enjoyed that you stepped out of the shop into the "back yard" environment. It would be cool to see a minimal series. Love your content

@Nanan00 Год назад

We made chain in a blacksmithing class I took about 20 years ago. We made 3/8" x 1 1/2" links, first we made 30 links separately then we made 15 open links then we linked them together. At the end of the class we tested the chains with a hydraulic ram, mine broke at a hair over 2000# when a bad forged weld popped. The anvils we used were made out of railroad track and had been specifically modified for making chain links.

@Stroke999 Год назад

My great great grandfather was a chain maker, used to work on the huge anchor chains for ships. He was part of a team that made the Titanic's chains.

@threecatforge Год назад

Chain making is super fun. I prefer to make the scarfs using one of the corners of the anvil to create a triangular divot. I feel it works really nicely when welding chain on 8-10 mm stock.

@kaischreurs2488 Год назад

10:42 this actually doesn't work with just about any modern website, at most they'd be able to see what websites you visit.

@IOrrinI Год назад

This would be a perfect time to test the strength of various modern chains vs your, or others', handmade old world chain.

@guy_withglasses Год назад

4:58 funny thing is, a firepit almost exactly like that is what I first used as a forge lol

@Splungified Год назад

My wife and I have been taking a series of monthly smithing classes locally lately, and we just covered forge welding this weekend by making chain links.

@jonrpearce Год назад

They demonstrate chain making at the Black Country Living Museum in Dudley. They use a chain makers anvil set close to the forge, though I think they just keep adding to the end of the chain, which once you get to long lengths has the advantage that you're only lifting a short length of chain - by joining shorter runs you're lifting the middle of a folded chain.

@sorenwelch4098 Год назад

This video felt more like an older Alec Steele video, a fact I very much enjoy

@keanuxu5435 Год назад

I’m reminded of, I think, the 3rd A Song of Ice and Fire book, with the Battle of Black water, where Tyrion ordered every blacksmith in King’s Landing to make chains, and one particular smith thought such a simple thing was beneath a man who made intricate and delicate pieces for royalty or whoever, and Tyrion was all like, “if it’s so simple, a master like yourself should be able to do it with both hands chopped off. Shall we test that theory?”

@memyselfandeye1234 Год назад

nice to see a humble honest video from you with out BS and limited unrequired flashy editing montrge BS peace

@SgtBurned Год назад

I love these at home style blacksmithing videos. Makes it seem more homely, great job on the chain!

@xbox360geek1234 Год назад

I'm a smith from upstate NY USA, you can save a lot of time by hammering the section you are going to cut into a scarf before you cut, then cut and scarf are one heat and you can scarf two links at once, also with a longer fire you can shape the link in that same heat while still on the rod

@likesc00b59 Год назад

This was so cool. It surprises me how many people didn't know how chain is made, and that just means you're teaching people something new once again! Great video.

@AxR558 Год назад

Next step is to make a Gunter's chain - used for measuring out distances for surveying in old imperial units. An imperial chain = 22 yards/66 ft = 100 imperial links, 1 link = 7.92 inches. The most frequent place to see something that is exactly 1 imperial chain is the distance between the two sets of stumps on a cricket pitch.

@onelegout Год назад

You should make a chainmakers anvil and then have another attempt and see how many more you can make with it!

@occamraiser Год назад

I went to a comprehensive school in the 1960s/1970s that used to be a 'county modern' - so it had all the equipment from it's non-academic heritage..... I was lucky enough to do metalwork in a department with lathes, a forge, milling machines and I have never forgotten the pleasure of hitting yellow-hot iron with a big hammer - even though I was 12 the last time I did it. 50 years ago. Watching this took me back to a very enjoyable childhood - thanks :)

@adelbert7162 Год назад

I would love to see this little challenge again after you get used to chain making!

@markfergerson2145 Год назад

Might be an interesting challenge for other SmithTubers.

@zenmark42 Год назад

This is my favorite video of yours in a long time. The combination of what got you into smithing as a teen and history are A+ 10/10 great video please do more historical smithing stuff.

@s14slide Год назад

You should redo this with the period in mind. I would think a blacksmith would have an apprentice or two at any given time. One cutting lengths, one making rings and scarfs, and the master welding. Also, hang the chain. If it's suspended above the anvil while you are adding a link, say from a line that runs from the forge to the anvil, the work would be quite a bit less awkward.

@matthewdominguez4350 Год назад

Seeing that hand made chain makes me think it would be cool if you could do a project like a pair of shackles/manacles

@housegoth Год назад

You could make more in a day if you did it production style. Things like scarfing the ends of all the bars before you bend them into links then bending them all into loops before welding the ends, etc.

@tissuepaper9962 Год назад

Probably faster to do the scarfing after bending the blanks into a U shape. When they're straight you can only heat one end at a time and you have to pay careful attention to the relative orientation of the scarves so that they'll line up when bent. When you forge the scarves after bending you can do both of them in one heat, and they're aligned with each other by default. This also creates a natural separation between the cold work of cutting and bending, and the hot work of forging and welding.

@joshuacheung6518 Год назад

I might be wrong but i think pat meant after the initial u bend but before the final set of bends to make an O Basically it would be... Cut 20 straight sticks Bend 20 Us Scarf all 20 Weld them

@housegoth Год назад

@@tissuepaper9962 if the bends were being done cold I would agree with you.

@garethbaus5471 Год назад

@@tissuepaper9962 you can have many irons in the fire and simply pump out scarves on one end for a day, before pumping out the far end for a day, before bending U shapes for a day before welding links for a day or two. The average number of links per day could get pretty high if you minimize the time spent adjusting positions while at temp and don't have much if any downtime waiting for heat.

@jstone7682 Год назад

I always found that starting with 200mm of 12mm steel, upseting each end and forming the scarfs on a sharp corner of your anvil makes it weld easier and you have enough material left after your first heat to then forge it back into the original diamiter with no honesty marks.

@baxteroliver3319 Год назад

Love these new blacksmithing videos. More please

@danagray9709 Год назад

Once you got to the seven link chain, you should have started over. Create another seven links in the same fashion and then work on connecting the two chains into a 15 link chain.

@brandonjester9942 Год назад

I have been following you for close to 4 years and I love when u do 100% hand hammer work

@granitesand78 Год назад

I don't know why this was done, and why it was in your dads backyard in the winter, but it was awesome lol. It's really fun watching you blacksmith. Also I love the music that sounded like it was from the roaring 20s

@Defensive_Wounds Год назад

Last time I used an old timey blacksmithy forge like this (but deeper and tapered so the gunk does go to the bottom when you shake up the coal) was in 1993 when I were 18! I made a few horseshoes and a wheel rim and placed it upon the wooden spokes while hot to have it expand onto it and burn into place on the wooden spokes for a cart.

@MadNumForce Год назад

If I was to rationalize production and make it more efficient, I wouldn't cut the bar right away to make a link's length, but first forge it flat to make the beveled end, and then cut it when it's thin. In one heat and less hammer blows, you prepare the second end of the link you're cutting and the first end of the next link. Saves time and coal.

@Dreadought Год назад

Well Alec, or whoever will read this from the team, this was an incredible surprise. I started watching a long time ago, it was the shop at Baker st? Tiny little sheet metal shop and problems with the insurance company over what lock you could use, and making stripper bars for a press jig for hammer heads. I stopped watching about the time you were moving to the US: the videos were so over produced and edited till they were basically tv production levels of useless and boring, I wasn't learning anything from you, just watching clever editing tricks that hid interesting. This video was great, it feels like you took a step back and actually tried to show yourself learning, and teaching, and just enough editing to keep the video moving during operations you'd done before in the video. I wasn't initially going to watch when RU-vid recommended this video, but I'm glad I did, I might even check out some of the other recent videos to see if it's a trend or just something because of the holidays. I hope you guys enjoyed the holidays, and it was so nice to get a glimpse of the old Alec, I hope to see you again soon.

@thematronsmilitia Год назад

I have a challenge. Make some star drill chisels for manually drilling holes in stone. I can't even find modern ones online, only used from eBay. The alternative is a holder for bits made for hammer drills, marketed to rock climbers, but they cost like $80 which is more than some hammer drills. You could make feather and wedge rock splitters to go with them

@tauIrrydah Год назад

It's funny what you say about the consistency of forged chains, because you read all those stories of people breaking out of their chains or striking them with a hammer to free someone and it makes more sense if there's brittleness there.

@Meenie66 Год назад

As good as modern chain is, the character of your hand made chain is just beautiful! I really love it. You cant go past handmade for some things. Great work mate.

@Zogg1281 Год назад

I've seen other blacksmiths making chain and some tips they gave were keeping the anvil closer to the forge, something to help hold the chain up and a pair of chain tongs with narrow jaws so they don't get in the way as much and they hold onto the chain better..... I'd be interested to see if that helps?

@benjaminzedrine Год назад

It's helpful to have a little hook for the hardy for both welding, and holding the other links for pickup. So first it's got two hanging, loop through and weld without touching or wasting weld heat. Then same again on threes for the seven, sevens for the fifteen. Then the operation is the same every time and there is no mess of links anywhere except hanging straight down.

@benjaminzedrine Год назад

You got spam

@BrennonIsMilak Год назад

Theoretically you could go a lot quicker if your chain doesn't need to hold a lot of weight and you can just butt the ends together without a weld. I just saw a video from That Works earlier today where Ilya was making nunchucks and he used a really clever method where he bent his chain stock around a larger round stock until it was in a nice coil. Then he used some bar stock to shape it into ovals. He cut the whole thing down the middle, then put all the links together.

@mikybinns9343 Год назад

I had the privilege of seeing chains being both hand and machine made (and other stuff) over 40 years ago in the black country, some by cottage industry ...basically a bloke in his garden. They were very fast... by the way the join is usually not at the end of the link, but half way down the longest side. They finished them off by tumbling in huge drums to smooth the surfaces...every thing was moved about via hooks and rings in the ceilings like a giant snake...small stuff was just bagged into sacks. Obviously it's a lot harder than it looks if Alex can only do a small length in a day...great video 😊

@bobthebuilder6504 Год назад

10:18 - 10:21 the music aligns with the hammer hits. and you should also stress test the chains and compare them to store bought ones with the same thickness.

@The_Smith Год назад

Stock calculation for chain links, twice the outside length plus once the inside width.

@MrZhootSe Год назад

Some old-time chains we have here in Sweden were riveted instead of forge-welded. True there weren't as strong, but cheaper and quicker to make. And they were "good enough" for most farm related work at least

@JasonBarnhart Год назад

You might try winding your rod stock around a mandrel. Then use a hot cut on an angle to give you a bias cut link for welding. After that you weld in batches one link after another. It’s often easier to assemble the chain and then do the welds. You can pile it in a bucket or wind it around a helper that resembles a short coat rack. If your doing a lot of it you can wind it on a big spool. Making individual links one at a time will take a dogs age. Your experience may vary and I haven’t made any chain in years but that’s how I learned it. Anyway, well done. Skills, tools, actually making a living at this stuff and charisma to boot. You are winning.

@rufioh Год назад

It would be cool if you could find some old blacksmith made chain to show us what chain making professionally could achieve.

@liambennett8862 Год назад

Best Alec Steele video I’ve seen in the last few months! Looks like you are really taking the time to enjoy the craft of forging again. Back to the roots of the channel.

@allenseeallendo5844 Год назад

I love watching Max Fosh forge steel. Not many people know he’s a blacksmith.

@AndrewCartwright304 Год назад

DM me 👆👆 Thanks for watching and commenting I have got some rewards for you🎉🎉

@neonsilver1936 Год назад

I really want you to redo this but with a bending jig to get the links bent before you cut them. Maybe you could bend multiple wraps and cut them with a saw before scarfing them on a grinder or something...of course, that would mean one side of the chain links would have to be wider to accommodate so that you could squeeze them back together for the weld and have them overlap...but that's just a part of the jig, I reckon. With modern tools and methods, how much more could you make? You can even do a third go at it where you allow yourself the use of a modern welder or torch

@rogofos Год назад

honestly this is surprisingly efficient that works out to about 120£ per meter so the gap in efficiency between modern mass manufacturing and medieval tech is much smaller than in agriculture

@samcochran8203 Год назад

HE FORGED THIS CHAIN IN LIFE THROUGH HIS ACTS OF WEALDING!

@b2bogster Год назад

I've been watching you from very early on. You are a big reason I blacksmith ( hobby for now). I l really like that you are doing this type of blacksmith again! Cheers to more!

@sanstheskeleton9204 Год назад

I've never blacksmithed a day in my life but when that first link shot sparks my mind went "oh yeah it's weldin time"

@DragonBornish Год назад

I'm just imagining how much work those big anchor chain would have been. Scaling this up to 2-3 inch stock seem like an insane undertaking. Even just making a couple of links, let alone the hundreds of meters needed, PER ANCHOR! 😱

@SamuelMcCunemusic Год назад

love it! reminds me of the good ol video days.

@hamishmaxwell989 11 месяцев назад

I made chain in my shed on my forge, it’s tricky to get the hang of, I found using 10 or 12mm bar and lengths of 7” worked best, you get a decent scarf and can hit it harder on the weld

@angrydragonslayer Год назад

The chain making machines were probably one of my favorites to work with $250k and the operator didnt actually have to do a thing aside from feeding it bars (which a forklift brought in bundles that you'd use a crane to load the whole bundle at once ~2 times per shift)

@paladinofwrath2145 Год назад

Now you're back in the UK, you should do another Collab with Mike from TA outdoors. Maybe making something baby friendly as he's a new dad

@smagliaro Год назад

I'd love to see more quickie videos like this where you cover "simple" blacksmithing jobs that have been replaced by modern processes.

@doomnukem7196 Год назад

There is something I would love to see you tackle all by hand and no power tools, and that is the belt of Deltora

@ScottsInverts Год назад

I love spiders , would love to see how you would go about forging a spider , (tarantula) maybe give it pattern with Damascus. Been following you for many years

@tankmk24 Год назад

I need more build videos I love them and help me sleep when I struggle to go sleep watching you work is soothing

@MarcenariaMagnus Год назад

Awesome video Alec! So good seeing you get back into blacksmithing :)

@EdwardIglesias Год назад

I took my first blacksmithing workshop from a guy named Bill Sheer who was associated with the Coast Guard and Mystic Aquarium in Connecticut where they restore old ships. He told me the worst job he ever got was to make some historic reproduction chains for tall ships. Not only are they massive but they all have to be identical. There is no room for creativity as you just have to turn out a certain length with all the incumbent difficulties.

@PBRJOHN684 Год назад

Happy new year to Jamie, Mrs Steel and you Alec. Now all you need to do is make a giant pendant for the chain 👍🍻🍻

@insanestang4life Год назад

Would be cool to see you take smaller newer chain and compare the breaking point of the forge welded chain you make to the new stuff.

@hamasathecold7842 Год назад

Have you heard of the cathedral, in Spain I think, that’s held together by a massive chain that was put on hot and then cooled to compress the building together and keep it from falling out? Pretty cool stuff

@ryanbrooks3785 Год назад

As a person that makes chain on a double headed welder, purpose built to weld chain... I must say, I have it super easy.

@tehs3raph1m Год назад

I imagine they had a far more efficient method with batch processing a load of closed rings and ready to close rings. Then have a chain day where they make the actual chain.

@HyrannoCraft Год назад

Alec, you know what you must do, you need to either construct or purchase your own Chain makers anvil.

@sirkai007 Год назад

Watching you forge chain and struggle with the cumbersom length makes me think of "A Christmas Carol" by Dickens. Scrooge's dead business partner, Marley, talks about how his evil deeds are like links in a chain and each deed forges another link.

@Vikingwerk Год назад

As I understand it, there are a few designs of chain makers tongs as well, which help manage holding the back 2 links out of the way while you weld.

@kameljoe21 Год назад

You are missing one vital thing and that is your apprentices. There were blacksmith who only made chain and they would task each one of their boys with a task in the process and then the master black smith would take the links and weld them. He could make chain as fast as he could weld them. One heat and then a proper mold to set the links and then on to the next one. He would of had jigs for holding the chain in place and everything. It would also help if you bought some old chain and examined it. They were all pretty uniform in size and shape. One apprentice would cut round stock to lengh using either a hot cut or cold cut. They would have a forge to which they would move the lenght of round stock over the fire and with a cutting jig and tool cut a sharp angle then another apprentice would be tasked with bending it in to a box shape with enough space that each link could be placed on to the full length chain. The type of chain would factor in during which age you want and what the chain was going to be used for. With a small group of 1 man and 4 younger people you could put out a good amount of work and make a good living. People assume they only had a few staff yet many places prior to 1800 would of had several people working and making things.

@patrlim Год назад

No way your name is Steele, that's too perfect.

@Ally-Oop Год назад

Astonishing to think about. I was just wondering about efficiencies when he goes and brings up the chain making anvil and not only that but in the clip they show it’s positioned riiight next to the fire. Very cool content.

@vicentevasquezb Год назад

Could you bake those chains to make them stronger? And compare them to not baked chain and to modern chain

@Zenguin Год назад

There was a German way of making chain that 'Just laid these big chunks of metal on each other' Was interesting and very efficient read about it. Not that I can find it again when I want to share it. The technique did not use any Scarf at all.

@deep5811 Год назад

It has been a good ride from when you had a couple thousand subscribers until now. The money is fun but never forget your roots.

@jillthecivic5650 Год назад

You should make a vintage sure cut can opener next!!

@indianasquatchunters Год назад

It makes you think about just how long it would take to forge the massive chains we see on ships or even the sea chains like Constantinople used to prevent naval vessels from entering the city’s harbor. Literal tons and tons of iron all forged by hand. It had to take years. I wonder how they transported it around the shop and to the ships.

@joshuasmith1157 Год назад

you do know that literally every single one of us wanted to see you test the chain strength and find the weakest link. putting it up against store bought chain would have been fun too.

@penfold7800 Год назад

Super Cool. Thankyou for showing whats involved. Now, how would you harden that chain to make it saw resistant?

@Eyes0penNoFear Год назад

That background music at 7:40 made me look up to see if Peter was getting ready to fly something into view.

@shockwave6213 Год назад

I imagine when chain was made on an industrial scale by hand, the links were probably all usually made by 1 man, left open and put in a bucket until the bucket was full then another blacksmith would take those links and join them together over his own fire in the workshop.

@JT-tz5hp Год назад

Love the simple blacksmith history lesson.

@xpndblhero5170 Год назад

5:28 - This is exactly why Hemp became more popular on ships as rope instead of chain because of the failure rate.... They couldn't make good chain in such long lengths for the shipping industry.

@damascuseverything Год назад

10:30 maybe a little clue as to the future use of this chain.....? Another flail build?

@Argosh Год назад

I think you should research how they did it back in the day. I only invested a few minutes and they apparently cut them at an angle and most chains I found were welded on the flat part, not the round.

@Zach010ROBLOX Год назад

New charity stream idea like the bottle opener (or whatever it was). Make a chain for each person who buys/donates/hits a small goal and by the end you'll have a long chain formed with love, or 💰 🤑