Тёмный

How NASA Reinvented The Wheel 

Veritasium
Подписаться 16 млн
Просмотров 13 млн
50% 1

NASA have made a wheel capable of withstanding tough Martian terrain, but just how indestructible is it? Head to hensonshaving.com/veritasium and enter code 'Veritasium' for 100 free blades with the purchase of a razor. Make sure to add both the razor and the blades to your cart for the code to take effect.
▀▀▀
A huge thanks to everyone at NASA Glenn Research Center for having us at the SLOPE Lab, showing their work on this indestructible tire, and helping with the science and animation.
A huge thanks to everyone at Smart Tire Co for showing us around their facility, teaching us about nitinol, and letting us flatten their tires.
▀▀▀
References:
Steel Rod Footage - ve42.co/SteelRod
H. Föll. 8.4.1 - Martensite. University of Kiel, Faculty of Engineering - ve42.co/Foell
Bhattacharya, K. (1998). Theory of martensitic microstructure and the shape-memory effect - ve42.co/Bhattacharya1998
Bhattacharya, K. (2003). Microstructure of martensite: why it forms and how it gives rise to the shape-memory effect (Vol. 2). Oxford University Press. - ve42.co/MartensiteBook
Shaw, J. A. (2008). Tips and tricks for characterizing shape memory alloy wire: part 1-differential scanning calorimetry and basic phenomena. Experimental Techniques - ve42.co/Shaw2008
Buehler, W. J., Gilfrich, J. V., & Wiley, R. C. (1963). Effect of low‐temperature phase changes on the mechanical properties of alloys near composition TiNi. Journal of applied physics, 34(5), 1475-1477.
Kauffman, G. B., & Mayo, I. (1997). The story of nitinol: the serendipitous discovery of the memory metal and its applications. The chemical educator, 2, 1-21. - ve42.co/Kauffman1997
▀▀▀
Special thanks to our Patreon supporters:
Emil Abu Milad, Tj Steyn, meg noah, Bernard McGee, KeyWestr, Amadeo Bee, TTST, Balkrishna Heroor, John H. Austin, Jr., john kiehl, Anton Ragin, Benedikt Heinen, Diffbot, Gnare, Dave Kircher, Burt Humburg, Blake Byers, Evgeny Skvortsov, Meekay, Bill Linder, Paul Peijzel, Josh Hibschman, Mac Malkawi, Juan Benet, Ubiquity Ventures, Richard Sundvall, Lee Redden, Stephen Wilcox, Marinus Kuivenhoven, Michael Krugman, Cy ‘kkm’ K’Nelson, Sam Lutfi.
▀▀▀
Written by Derek Muller, Katie Barnshaw, & Emily Zhang
Edited by Trenton Oliver
Animated by Mike Radjabov & Ivy Tello
Coordinated by Emily Zhang
Filmed by Derek Muller, Emily Zhang & Raquel Nuno
Additional video/photos supplied by Getty Images & Pond5
Music from Epidemic Sound
Produced by Derek Muller, Petr Lebedev, & Emily Zhang
Thumbnail by Ignat Berbeci

Опубликовано:

 

28 апр 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 8 тыс.   
@Fozzdaddy12
@Fozzdaddy12 Год назад
As an engineer I’ve known of nitinol for a while, did some labs with it in college. But I never saw the example of bending the nitinol pipe in half and have it return to shape. Awesome material
@thesmarttirecompany
@thesmarttirecompany Год назад
it's super cool to feel in person. that hot/cold effect is even more than you'd think (check out the facial reactions in the video)!
@onyx3019
@onyx3019 Год назад
hell yeah we use it dentistry and are also taught all about it ,especially for root canal instruments and for braces and orthodontic appliances.. but just like you never knew it was used in so many different ways ,crazy that all these fields have this material in common
@harpintn
@harpintn Год назад
I first read about it in the late 70's
@slav_K0
@slav_K0 Год назад
@@thesmarttirecompany For how long does the bent part stay warm?
@thesmarttirecompany
@thesmarttirecompany Год назад
@@slav_K0 if you are holding the tube like in the video, the heat will linger for a while (really it's your hand holding on to it). Otherwise it would dissipate into the air if it were held in place. However, for a tire rotating at high speeds, there is not really any time for the heat to escape, which is perfect because we get to "recycle" that heat energy instead of turning it into waste heat.
@speedfastman
@speedfastman Год назад
Can you do "how NASA reinvented cat girls" next?
@meqativ
@meqativ Год назад
catgirls v2??? real?
@aurockson2696
@aurockson2696 Год назад
@@meqativno, v…..3
@PaulLoveless-Cincinnati
@PaulLoveless-Cincinnati Год назад
What lol I don't get it
@chaseddraco
@chaseddraco Год назад
Real
@You-Have-No-Bitches
@You-Have-No-Bitches Год назад
@@DontReadProfilePicture- Cum
@valkyrie9729
@valkyrie9729 10 месяцев назад
They use this metal in orthodontia too. The wires for braces are made out of this. They are “programmed” as the parabolic shape that the orthodontist wants, then bent and tied into the braces. The heat of the mouth (aka your body heat) makes the wire “want” to return to its original shape, thereby pulling your teeth into the proper position! I was amazed when my orthodontist showed me this, it was super cool to see as a kid.
@asherandai2633
@asherandai2633 10 месяцев назад
Wait... so why when I had braces as a kid did they need to constantly be tightened and adjusted? Or is it a newer thing in orthodontics? Edit: Also my teeth wanted to return to their original position as well... 5 years of braces and retainers did nothing!
@koffing2073
@koffing2073 9 месяцев назад
@@asherandai2633 because its obviously a new tech
@lukeporter6321
@lukeporter6321 9 месяцев назад
@@koffing2073 Imagine thinking everyone knows about all technology and when it was created and used. He asked a question because it wasn't obvious to him.
@rawmakers
@rawmakers 6 месяцев назад
@@koffing2073you’re obviously a d-bag
@nickcunningham6344
@nickcunningham6344 5 месяцев назад
@@koffing2073 obviously not obvious to everyone
@jakeperrine2488
@jakeperrine2488 11 месяцев назад
My father was on the design team for the Apollo rover (and LEM,etc.) and received an award for his team’s design of the rover tires. It’s so cool to see this generations upgrades to the concepts they used back then!
@GillyTech
@GillyTech Год назад
I discovered a congenital defect in my heart at age 34. It was a penny sized hole in the two top chambers called the atria. They used a nitinol device to close the hole and allow heart lining cells to grow into it. This stuff saved me!
@MorganMadej
@MorganMadej Год назад
That is Fantastic! You are a living example of High Tech Heart!
@johanmetreus1268
@johanmetreus1268 Год назад
Glad they caught it in time, required my sister a stroke at the age 27 to find out she suffered the exact same problem.
@GillyTech
@GillyTech Год назад
@@johanmetreus1268 yes that’s really unfortunate and I hope your sister is doing better now. I too had a minor “mini stroke” called a TIA when I was about that age but didn’t report it as it only lasted a few minutes. More people should be aware of this condition and screening when you’re young is extremely simple.
@calimalu79cali11
@calimalu79cali11 11 месяцев назад
Are you on any blood thinners or just aspirin? Always wondered when it came to heart application and age.
@GillyTech
@GillyTech 11 месяцев назад
@@calimalu79cali11 matter of fact I’m on no meds at all. Aspirin for the fist 6 months then nothing 👍
@sv8765
@sv8765 Год назад
I love that these 2 engineers are so happy with their work, they look genuinely happy.
@poplicker4
@poplicker4 Год назад
who wouldn't be knowing they are on the brink of revolutionizing basically every industry $
@unorthodoxpickle7014
@unorthodoxpickle7014 Год назад
everyone is happy when they get to do what they love
@DarenKajiWolf
@DarenKajiWolf Год назад
I wonder why...
@MrInterpriser
@MrInterpriser Год назад
No, they’re not
@Climacticc_Chaos
@Climacticc_Chaos Год назад
We are all nerds here.
@adrianrahardjo8481
@adrianrahardjo8481 9 месяцев назад
In the first 10 minutes, they basically covered several key topics of a Materials Science degree in a very interesting and memorable way. I really wished this video was available a few years ago when I was still in uni...
@b0bby5104
@b0bby5104 9 месяцев назад
they were this channel is old and you had stuff like nile red too and a bunch of other channels
@dobber43
@dobber43 7 месяцев назад
​@@b0bby5104he said he really wished this video not videos by this channel or just other quality science videos he specifically said THIS VIDEO
@R005T4R
@R005T4R 10 месяцев назад
one of my customers was one of the engineers that was hired to study Nitinol in the late 60’s and 70’s he’s still inventing today and is currently close to a breakthrough in magnetics
@recordstorewhore
@recordstorewhore 10 месяцев назад
China has entered the chat...
@dagoberttrump9290
@dagoberttrump9290 9 месяцев назад
What kind of breakthrough?
@gratitudesacredawakening
@gratitudesacredawakening 9 месяцев назад
I would also like to know, I’m intrigued.
@colbyr7811
@colbyr7811 5 месяцев назад
​@@dagoberttrump9290he's probably been close to a breakthrough for 5 decades 😅
@xorgbeep
@xorgbeep 2 месяца назад
underrated hottake @@colbyr7811
@Eyerleth
@Eyerleth Год назад
I had NiTiNOL wires in my orthodontics as a teenager. They worked to slowly, continually push the teeth into their new positions, rather than needing painful tightening every couple of weeks. Quite an impressive material!
@RayMusic88
@RayMusic88 Год назад
That's cool! Do you remember if they cost more than regular wires?
@teeanahera8949
@teeanahera8949 Год назад
What do you mean “to” slowly? Surely not too slowly as that would be a criticism of them. You meant they worked slowly.
@potterfanz6780
@potterfanz6780 Год назад
@@teeanahera8949 They worked to slowly, continually push the teeth = They worked to push the teeth
@mycondolences8708
@mycondolences8708 Год назад
@@teeanahera8949 they worked to slowly and continually push to teeth into their new positions
@gio3061
@gio3061 Год назад
​@@teeanahera8949 I worked to swiftly and definitively get you back in school, to improve your English comprehension.
@astigstudio
@astigstudio Год назад
Veritasium videos are the type that don't need any fancy high pace over energetic editing needed. I will watch the video all through out no matter what
@mantrachhaya6835
@mantrachhaya6835 Год назад
For real man !! I wait eagerly for a new video from veritasium, and untill a new video comes i visit the old videos, or watch old Vsauce videos,
@rokochoco6152
@rokochoco6152 Год назад
they need comment bots though
@falconerd343
@falconerd343 Год назад
I watch it all the way through, but I have to do it at 1.5 speed...
@personrod2973
@personrod2973 Год назад
@@falconerd343 godamn you guys have some real attention span problems
@sleepingduty2987
@sleepingduty2987 Год назад
Jhonny Harris: why attac me?
@matijakruhoberec
@matijakruhoberec 5 месяцев назад
These types of videos is what keeps me going through mechanical engineering school. Seeing things I learned about being applied in real world situations, but also reedeming the knowledge I gained and thought was useless during materials courses.
@5MadMovieMakers
@5MadMovieMakers 10 месяцев назад
Engineers who never "tire" of their job!
@Nezzen-
@Nezzen- 10 месяцев назад
oh brother
@S1YAM
@S1YAM 9 месяцев назад
that was so terrible. never try puns again. it's not your thing
@MIlodOz0n
@MIlodOz0n 9 месяцев назад
@@S1YAM its a type of humour, so it's not your thing either
@lucienmoolman8017
@lucienmoolman8017 8 месяцев назад
That was so bad it became good
@ImThatGirl101
@ImThatGirl101 8 месяцев назад
🐑🪘🐍
@kedo
@kedo Год назад
I love the excitement and positive energy from all those engineers! They’re really happy to show their work.
@hopegold883
@hopegold883 Год назад
“Good job, science guy!” ❤️
@sudhanshu2802
@sudhanshu2802 Год назад
@@hopegold883 that got me smiling.
@hunszaszist
@hunszaszist Год назад
It's only positive energy when you apply stress, otherwise it's endothermic!
@commentfreely5443
@commentfreely5443 Год назад
while infrastructure on earth hasn't been maintained in the last 100 years and they waste money on going places with no air and no use to us.
@jamessever8936
@jamessever8936 Год назад
Yeah, makes me want to work there!
@jnmharris
@jnmharris Год назад
I did a report on nitinol in 8th grade science...41 years ago...nice to see this video explain its properties even further. Cool!!
@RC_Engineering
@RC_Engineering Год назад
It's sad that it's never found widespread usefulness.
@rl6382
@rl6382 Год назад
​@@RC_Engineering it just did
@RC_Engineering
@RC_Engineering Год назад
@@rl6382 where?
@rl6382
@rl6382 Год назад
@@RC_Engineering they literally mentioned multiple sectors that are implementing this material for upgrading current systems... did you not watch this video?
@RC_Engineering
@RC_Engineering Год назад
@@rl6382 oh I see. Youre mistaking the possibility of niche uses for actual widespread use. They've been theorizing uses for 40 years, yet when you look around do you see this material on a daily basis?
@MiguelHernandez-nd3pr
@MiguelHernandez-nd3pr 4 месяца назад
Hands down one of the best videos you've made and one of the best on RU-vid. So helpful. We watched this video as a family this morning with teenagers and 8 year old. They thought this was amazing. Great job inspiring science in the lives of my children.
@kob8634
@kob8634 11 месяцев назад
Fantastic. Been curious about Nitinol for over half a century and this is the best bit on it I've seen yet. Thanks
@ExtremeBirdTypography
@ExtremeBirdTypography Год назад
The plane with the vortex generators was the coolest part to me. Seeing them flip up and down due to the heat was awesome.
@georgefragiadis1378
@georgefragiadis1378 Год назад
Nasa and Boeing studied also chevrons with shape memory alloys, bending towards the flow of the jet exhaust when taking off or landing to reduce noise( by introducing mixing vortices) and straighting the chevrons out of the flow when cruising to increase performance
@thePronto
@thePronto Год назад
I wonder if there are ever any scenarios where that would be not the required behavior. What about those Antarctic resupply flights or airfields in Nepal or Tibet: you might not get the vortex generator to flip back up....
@SonnyKnutson
@SonnyKnutson Год назад
@@thePronto Was thinking that too. Maybe some extreme temperature countries would cause issues here. I mean the air higher up is cold but it might not be colder than some of the coldest places on earth? Or similar with warmer air at ground level.
@princejangra1231
@princejangra1231 Год назад
@@SonnyKnutson exactly
@iLLadelph267
@iLLadelph267 6 месяцев назад
21:34 shots like this really communicate science fantastically. "put your full body weight on it" you can see Derek physically interacting with the thing and playing with it like any student might
@rubycosmo6279
@rubycosmo6279 6 месяцев назад
The guy demonstrating seems like an incredible teacher with the way he engaged everyone and used the audiences terms in a scientific context
@stepexgd6628
@stepexgd6628 Год назад
I'm not an engineer or physicist, but this is one of the coolest materials I've ever seen.
@waltersike
@waltersike Год назад
Physical
@stepexgd6628
@stepexgd6628 Год назад
Yeah, I'm not physical. I'm a ghost >:)
@user-ku5be4nc3g
@user-ku5be4nc3g Год назад
You haven't seen my wife yet... Just kidding, i am forever alone.
@ailaG
@ailaG Год назад
Especially when straightened!
@11x334
@11x334 Год назад
I said there are electric rocks just like magnetic rocks and suddenly there were all these photos of that stuff
@nikolatesla2318
@nikolatesla2318 Год назад
What i really like about this videos, is the fact that the people that work in these places are actually nice and kind and are willing to share the beauty of science to whoever is in front of them. That's passion right here guys
@thesmarttirecompany
@thesmarttirecompany Год назад
The team at NASA Glenn is incredible (and we like our guys a lot too)!
@xGaLoSx
@xGaLoSx Год назад
those first 2 tests were cringe and unnecessary. The new tire isn't holding in air, so why do a nail test?
@johnlucas6683
@johnlucas6683 Год назад
@@xGaLoSx Well.. to show the difference. It is still called a tire after all. And seeing it getting shot by a bullet, not only not getting punctured but also not getting bent to unusable state, as a wheel, is kinda amazing.
@hellobro9280
@hellobro9280 Год назад
Ofc not, if it wasn't a popular channel like Veritasium, they won't even care
@xGaLoSx
@xGaLoSx Год назад
@johnlucas6683 you don't need a test to know a nail isn't going to pop a tire that can't be popped.
@ivanmartindelcampo
@ivanmartindelcampo 10 месяцев назад
I vividly remember in my gen chem lab class at uni we had an experiment where we messed around with Nitinol and I was completely in shock and awe with how it was behaving. I want to say that day was the moment I fell in love with material science and now love learning and researching about polymers as a chemist!
@marklapointe48
@marklapointe48 10 месяцев назад
Wow, what a cool video and comprehensive demonstration and explanation of nitinol and its applications! Great job on this one, probably one of my favorite Veritasium videos. And thanks to everyone at Glenn and the contractors that work on this awesome tech and explained it so thoroughly!
@LogicAndReason2025
@LogicAndReason2025 Год назад
We need more stuff like this to help the public understand that NASA is not an expense, but a great investment that pays back more than double.
@teslafieldphysics4041
@teslafieldphysics4041 Год назад
How much as NASA put in your pocket? Nothing! Your brainwashed, I feel sort for you.
@unknownman5090
@unknownman5090 Год назад
I agree with you. I hate US but I love NASA. They help space exploration become reality. I dont care if Apollo really land on moon or not. That thing do no harm even if it a lie.
@ThatGamerAlexIsThatBoy
@ThatGamerAlexIsThatBoy Год назад
No Bc bad for capitalism
@earthling_parth
@earthling_parth Год назад
@@ThatGamerAlexIsThatBoy Exactly. Capitalism values short term gains way more than long-term returns.
@LogicAndReason2025
@LogicAndReason2025 Год назад
@@carlosquinto1383 Not weird at all. That is how national investments work. Just like with public education. The Post WW2 tech boom was fueled by major investments in public science education. Some people think that because a percentage of students flunk out, that the investment is not good, when in fact, the benefits far outweighs the loss. The smarter the country, the richer it will be.
@beckyolesen1919
@beckyolesen1919 Год назад
One of my favorite thing about being an engineer is watching other engineers geek out about whatever they are working on!
@syedabishosainrizvi7817
@syedabishosainrizvi7817 Год назад
It is genuinely so much easier to talk at length to someone about a project that you've done
@ACoe40
@ACoe40 10 месяцев назад
Very cool, I’m in medicine and we use Nitinol stents a lot- interesting to learn how they retain their shape and are able to apply the necessary radial forces to a stricture
@maryistubing
@maryistubing 11 месяцев назад
I love how that Santo guy is really, really into the sciene and its effects. You can just see his love for it. Awesome.
@uasif1993
@uasif1993 11 месяцев назад
As a dentist, we use NiTi alloys in our dental files for root canal treatments. Really interesting to see its applications in other fields!
@EddieBurke
@EddieBurke 11 месяцев назад
Is the application similar? Does applying heat to it help it “set”
@Vadow789
@Vadow789 11 месяцев назад
Isn't it also used in braces?
@julianofischerrauber8938
@julianofischerrauber8938 11 месяцев назад
@@Vadow789 Yes, in self ligated braces.
@MCMXI1
@MCMXI1 11 месяцев назад
@@Vadow789 My orthodontist used NiTi in my braces about 30 years ago. I'll never forget him applying cool and watching the wire go limp then applying heat and instantly regaining the shape for my teeth.
@monastero
@monastero 10 месяцев назад
Vascular stents!
@mdashrafulislam64
@mdashrafulislam64 Год назад
As someone deeply passionate about material science, I found this video on NASA’s development of the Spring Tire to be incredibly fascinating. It’s amazing to see how research conducted by NASA eventually trickles back into commercial usage and benefits us all. Thank you for sharing this information with us!
@grimaffiliations3671
@grimaffiliations3671 Год назад
Makes you realize that the government is actually more innovative than a lot of private companies. They come in after the government has spent a lot of time on research and development
@redpillsatori3020
@redpillsatori3020 Год назад
@@grimaffiliations3671 Not really, but keep telling yourself that
@4stomper
@4stomper Год назад
@@grimaffiliations3671 Quite the opposite.
@grimaffiliations3671
@grimaffiliations3671 Год назад
@@redpillsatori3020 Yes really, whether its new drugs, the internet, touchscreens or GPS, it's been government driving innovation
@johnyepthomi892
@johnyepthomi892 Год назад
@@redpillsatori3020 kindly elaborate rather than simply sounding like a contrarian.
@fontanelliconsultoriaeproj4909
@fontanelliconsultoriaeproj4909 8 месяцев назад
One thing of many that I apreciate about this channel is that you have made effort to adapt yourself to the science language of units... The metric system. Most others want to change the world instead of adapting.
@Cayled174
@Cayled174 7 месяцев назад
The title was so catchy that I thought It was some clickbait, but knowing veritasium I knew it was unlikely. I'm not disappointed. Nasa really did reinvent the wheel!
@calvinyoung480
@calvinyoung480 Год назад
Shoutout to all the amazing folks at NASA GRC's SLOPE Lab in Cleveland! I had the privilege of interning on this project and can't speak highly enough of everyone and all their work.
@Skept_
@Skept_ Год назад
How do I become a scientist? I have lots of knowledge about things and have my own theories, being apart of this world crafting and creating for man kind would be bad ass
@rickebert7548
@rickebert7548 11 месяцев назад
How? Learn all you can, and stay curious.
@rickebert7548
@rickebert7548 11 месяцев назад
I think this is just awesome… these advances don’t just happen, even with huge effort. Going to Mars or the Moon is an All-NASA program, maybe an all-of-humanity program. GRC, U.Ohio so proud to share the logo.
@calvinyoung480
@calvinyoung480 11 месяцев назад
@@Skept_ There are so many ways to get involved! It really depends on where you're at in life. Try to get engaged with local groups and communities--it's so much more rewarding to participate in person.
@paulpease8254
@paulpease8254 Год назад
The stress-strain curve reminded me of my PhD work on single DNA molecules. We could grab the two ends of a single DNA molecule (with laser beams, of course), and make force-extension curves. DNA also goes through a phase transition under physical strain. At first it acts like a low stretch string, where the force increases quickly as the extension gets close to the full length of the molecule. At around 65 piconewtons (65x10^-12 N) it will “overstretch” and at a relatively constant force (hallmark of a phase transition) will stretch to ~1.7 times its normal length. When the force is reduced it will go back to its original length, although there can be significant hysteresis depending on how quickly the load is reduced. The overstretching is coupled to an unwinding of the double helix, so in effect it’s a wind up toy and can be used to apply torque, e.g. rotate a microscopic bead. DNA is a super cool material, I hope Veritasium does a video on this stuff.
@salina3192
@salina3192 Год назад
I did not expect someone talking about overstretching DNA in an optical tweezer in a video about Nitinol. Greetings from a postdoc doing a lot of force extensions on RNA in magnetic and optical tweezers 😅
@BrotherWalrus
@BrotherWalrus Год назад
@@salina3192 As a layman, this video was mind-blowing enough, and now you two come in and tell us you can hold DNA with LASERS?! There's no brain left to blow anymore, it's all over the walls now!
@Merthalophor
@Merthalophor Год назад
> DNA is a super cool material Is there any form of research going on to use DNA as a main ingredient of a material? The same way e.g. polymers are used in plastic? Or what sort of (potential) applications do these cool properties you just mentioned have? Sounds fascinating!!
@tbraghavendran
@tbraghavendran Год назад
What about DNA computing 🤔
@gps9715
@gps9715 Год назад
Once again biology through evolution is way ahead of the curve. Awesome info. Thanks.
@cubandarknez
@cubandarknez 11 месяцев назад
alloys and material science in general is so freaking cool. If you track the progression of industrial technology throughout history, a lot of it had to do with working our way up the "material technology tree" per say, since even if we had an idea for something, we didn't necessarily have the material science tech to actually make it happen, and then at every new breakthrough you then unlock so many new possibilities.
@soupysoup931
@soupysoup931 11 месяцев назад
I like how Veritasium shows all this to average nobodys at home ,teaching us how important all that is and what actually is going on and how valuable it is to the society and not just some hoax a couple old idiots want you to believe. Great job! Also gotta appreciate all the people involved in discovering and working on those projects
@Salisaad
@Salisaad Год назад
What I love most about Derek is that he takes us to meet these incredible passionate people doing fascinating stuff.
@TheAnnoyingBoss
@TheAnnoyingBoss Год назад
Thus titanium alloy is pretty wild i just wonder what its durability is. Its like as if you had a. Ultra magic paperclip.
@Thorfinn.05
@Thorfinn.05 Год назад
I am preparing for a solids class test, and I will be asked about everything discussed here. This video not only improved my understanding of the topic but it went beyond discussing this new material for me, the applications, different scenarios and even the history. In short, you have made a goldmine of a video. Thank You so much, Veretasium Team. I really love your channel, and you never cease to amaze me.
@yuorem2826
@yuorem2826 Год назад
that’s so awesome
@RichardJohnson_dydx
@RichardJohnson_dydx Год назад
Worst class of my life. It sucks but you'll enjoy it and get through it.
@hopegold883
@hopegold883 Год назад
Hope it goes well!
@TheJvb8
@TheJvb8 11 месяцев назад
This was super interesting. Would love to see a follow-up video going into some of its limitations and why we haven't seen it more in industrial use for something that was discovered in the 60s.
@panner11
@panner11 10 месяцев назад
One of the big ones is just that it's pretty expensive
@asherandai2633
@asherandai2633 10 месяцев назад
@@panner11 So were computers back then. But the costs came down massively as they improved and got better at making them. So if it really is still so expensive, the question is what's stopping them from improving and getting better at making them?
@pkmnogosari6091
@pkmnogosari6091 9 месяцев назад
@@asherandai2633 the material is titanium, how many things are made of titanium? Shows you how rare they are
@asherandai2633
@asherandai2633 9 месяцев назад
@@pkmnogosari6091 titanium is the fourth most abundant metallic element, and the ninth most abundant element overall. It’s not rare at all, so it shouldn’t be so expensive.
@tylerdurden3722
@tylerdurden3722 9 месяцев назад
​​@@asherandai2633 Semiconductors became cheaper because transistors were made smaller and smaller. Meaning less material was needed. You can't apply that concept to something like gold, for example. It's expensive because it's limited. Both Nickel and Titanium ore is very limited. Nickel is can only be mined in a few placed on earth in significant amounts. Same with Titanium. Both metals have very high melting points (need a lot of energy to work them into shapes). Hence why nickel alloys are used in jet engines (because it can handle crap tons of heat). The bonds between Titanium and the stuff it forms a compound with in the ores require a crap ton of energy to break. Extracting Titanium from ore will always be energy intensive. There's no way around that. Titanium is very reactive so it needs special environments and tools to be worked. An inert atmosphere and tools that won't contaminate it. Working with both Titanium and Nickel are both very mature technologies. Both metals are used extensively in the aviation industry. There are 35 000 Commercial aircraft existing now, alone. Most of them making extensive use of both nickel and titanium. Everything to make it cheap in terms of energy has been done. Then the electronics industry also uses a lot of nickel, and increasingly so with lithium batteries. Only a few countries are blessed with Nickel and Titanium ore. E.g. Russia. Hence why nickel prices are skyrocketing. In other words, using nitinol for a lot more stuff will increase Titanium and Nickel prices. Making it more expensive, not cheaper.
@BetzalelMC
@BetzalelMC 2 месяца назад
Excellent use of graphs, totally hit home for me once visualized via graph! Thanks for another great video!
@jarretburgener3351
@jarretburgener3351 Год назад
As an engineer grad who had to work with material science this video was very facinating, and really gets you trying to think about other applications for such a material. I bet racecar companies are looking into this material for their tires. I wonder if you could use this material with appropriate heat controls to increase traction or decrease traction of the tire during the race. If so, I could easily see it being one of the biggest improvements to long-term race times as you could "deflate" the tire on harsh turns, and to slow down leading into them, and then "inflate" the tire on straights for speed.
@onyx3019
@onyx3019 Год назад
we use it in dentistry in root canals and braces which is amazing
@PinkFZeppelin
@PinkFZeppelin Год назад
In the context of racing tire pressure is usually used to control heat. Low pressure tires make more heat than the same tire at a higher pressure. They are just trying to target a specific temperature for a given tire compound. It could be cool to see it used to increase efficiency of vehicles with rubber tires. In the straights you could reduce the contact patch of the tire to reduce the coefficient of friction. In a corner it could do the inverse.
@leskobrandon7516
@leskobrandon7516 Год назад
I'm sure shoes have a place here
@bigmitchy4026
@bigmitchy4026 Год назад
i kinda doubt it'd be used for tires cause it seems like the coefficient of friction isnt going to be all that high
@GizzyDillespee
@GizzyDillespee Год назад
Rocket cars at the salt flats. Sort of like missiles with wheels
@jackjac
@jackjac Год назад
I'm a materials science masters student and Derek presented the topic really nicely. It's close to the level I was introduced to in my bachelors. I was blown away then and guess the audience is too. Thank you!
@ApofKol
@ApofKol Год назад
You are correct
@futsalkeegan
@futsalkeegan Год назад
Those phase transition and stress strain animations would have been a game changer in the intro to materials class!
@madmat1652
@madmat1652 Год назад
@@mladenivanov5630 insecure much?
@ApofKol
@ApofKol Год назад
@@madmat1652 Projection much?
@captainp.2721
@captainp.2721 Год назад
Did you learn about bullshitonium yet?
@TheRichardSilver
@TheRichardSilver 4 месяца назад
The coolest thing I've seen in a long time. All tires should be made with this material perfected.
@Jim54_
@Jim54_ 6 месяцев назад
This is why investing in space is so important. The technological developments can’t be understated
@DistilledScience
@DistilledScience Год назад
Oddly enough, as an engineer, for some reason my first thought when encountering memory shape alloys was "this could make some *really cool seasonal artwork!* "
@PsRohrbaugh
@PsRohrbaugh Год назад
Be the artist you want to see!
@kms4829
@kms4829 Год назад
Blooming plants but metal
@simonmarcu01
@simonmarcu01 Год назад
This wouldn't really work, because it only goes back to it's form when getting warm. You would have to manually reset it when it gets colder outside, but it would be a cool concept.
@GamerKiwiOfficial
@GamerKiwiOfficial Год назад
It would write "hot" when its hot and "cold" back when the temperature drops
@Alex-lk6rn
@Alex-lk6rn Год назад
Wow thats actually so cool. You could make objects bend to create shade when they're warmed by the sun as well
@bradleygarlak8283
@bradleygarlak8283 11 месяцев назад
I’ve never clicked on a video so fast. My great uncle was one of the lead engineers on the old moon rover tires. I’m so glad that they included it into this video and even though my uncle just passed away I know he would be thrilled that we are taking the next generation of tire for space travel for a spin.
@lunar9650
@lunar9650 11 месяцев назад
Rip grandpa you did a good service 🫡
@smolltaco5667
@smolltaco5667 11 месяцев назад
I hope the next gen space cars have v8s in them
@rishabhagarwal6057
@rishabhagarwal6057 11 месяцев назад
@@smolltaco5667 Sorry to break it to you man, but combustion engines dont work in space. There's no oxygen for combustion up there
@smolltaco5667
@smolltaco5667 11 месяцев назад
@@rishabhagarwal6057 who said the engine has to be exactly like the ones we have down here? You could just seal it and put oxygen in it
@cloudy7937
@cloudy7937 11 месяцев назад
​@@smolltaco5667 I'm only a STEM student and not a fully fledged engineer but I suspect that would make for a pretty short ride compared to nuclear/electric vehicles Still would be mucho cool
@crablegs329
@crablegs329 11 месяцев назад
I've never seen a razor sponsor be sold so well by a channel. Man could be professional marketer as a side hustle.
@hendini
@hendini Год назад
I screamed “NITINOL” the moment that the video started. I knew immediately what was happening. Fantastic video, as a Materials Engineering student, it’s neat to see the applications of material research, such as nitinol.
@sandercohen5543
@sandercohen5543 Год назад
Same, tho im not a student :)
@rocketkinger2506
@rocketkinger2506 Год назад
So glad to hear Austenite and Martensite in one of your videos. I have built my career so far around these two words and it has been so rewarding. You guys probably got to see it fly on recently ;)
@kenne210
@kenne210 Год назад
While watching this video I thought, this sounds like martensite. Its one of the few things I remember from college while in an engineering class. It stuck with me after a decade because it was so interesting.
@lo_azzopardi
@lo_azzopardi 11 месяцев назад
Thank you for spreading science man
@GlitchedBlox
@GlitchedBlox 7 месяцев назад
NASA should be renamed as "Science Agency", since everything developed is used practically, rather than just for space exploration.
@ScottsSynthStuff
@ScottsSynthStuff Год назад
I've been to NASA Glenn at their wheel development and testing center, it's really cool. I've seen those shape memory metal wheels, and the huge simulated Martian surface they have for testing. So cool.
@redion8575
@redion8575 Год назад
@Don't Look At Profile * no one cares
@allothernamesbutthis
@allothernamesbutthis Год назад
britains roads are resembling mars with all the pot holes.
@haidernaeemmalana8601
@haidernaeemmalana8601 Год назад
You wont believe i just say it too in a RU-vid video
@melkiy582
@melkiy582 Год назад
@Don't Look At Profile в России не работает. Не видно картинки профиля
@xelasomar4614
@xelasomar4614 Год назад
The question is when will it be commercially available. Living in NYC I would love a pair for my bike.
@ThomasKing19933
@ThomasKing19933 Год назад
The work NASA are doing is incredible!
@GameDevAraz
@GameDevAraz Год назад
Yeah, their gay
@grievetan
@grievetan Год назад
@@GameDevAraz cope
@HarrDarr
@HarrDarr Год назад
@@grievetan ur gay 2
@TheAnnoyingBoss
@TheAnnoyingBoss Год назад
​@@grievetan no nasa is gay in a lot of ways. Look hoe gay the budget it 😂 but cool stuff comes out of it
@mortenhyvejle
@mortenhyvejle Год назад
Absolutely gay
@tostupidforname
@tostupidforname 2 месяца назад
11:21 this is one of the few 3d visualizations that actually makes sense. good job
@sangamo38
@sangamo38 10 месяцев назад
18:47 This guy has stars in his eyes while explaining things
@FutonProduction
@FutonProduction Год назад
My job is to develop heat treat processes for mainly medical device components made out of nitinol, getting the components to transition from martensitic to austenistic at specific temperatures in all sorts of shapes, but even I was able to learn more about nitinol and it’s varied uses. Really fascinating video.
@alexkram
@alexkram Год назад
I once designed a solenoid valve that used a nitinol spring. The problem I had was the fatigue life was not good. I would get springs breaking at 100k cycles and I needed 10x that. So I abandoned nitinol for spring applications. This was 15 years ago. Have there been advances that have improved the fatigue performance? I assume tires would need very good fatigue life.
@FutonProduction
@FutonProduction Год назад
@@alexkram it’s possible that the strain was too close to the maximum of roughly 8%, which over time could weaken the material to the point of breaking. 3-4% strain is ideal for longevity, and would make for a relatively life-long part.
@JorgetePanete
@JorgetePanete Год назад
its*
@ignolan
@ignolan Год назад
@@alexkram I'm also an engineer at a nitinol device manufacturer. A big factor in fatigue life is alloy purity. Companies now offer alloys with extremely low inclusions (ELI from Confluent, Enduro from Memry, etc.) You would have better luck with those alloys when considering fatigue. They are fairly recent advances so weren't available 15 years ago.
@manuvillada5697
@manuvillada5697 Год назад
How expensive is the material? Could those jeep wheels be a factible product?
@UltraDumbass1782
@UltraDumbass1782 Год назад
I think one of my favorite things about channels like this is just how giddy everybody who deals with this stuff is when somebody shows an interest in what they do.
@markbtw7987
@markbtw7987 10 дней назад
When you started bending the tube to extreme levels and it was changing temperatures from it... Amazing. I would buy one of those tubes to play with for sure. Incredible that materials like this exist and we're just now finding what could be near limitless uses for it.
@IngpulsGmbH
@IngpulsGmbH 11 месяцев назад
Great Video & such a beautiful technology! We are always happy to work with it from day to day. :)
@kashanalidjan7978
@kashanalidjan7978 Год назад
It was mentioned that NiTiNOL is being used in multiple applications, which is super neat as I was able to use it for radio astronomy applications in my graduation thesis. Making large structures with NiTiNOL is way cheaper than launching and constructing them in space. The opportunities are almost endless!
@thesmarttirecompany
@thesmarttirecompany Год назад
Yes, so many possibilities!
@gabiferreira6864
@gabiferreira6864 Год назад
I really wonder what's the downside of this material? Is it just cost? Cause all I've heard of it is super positive, if it is as good as it sounds we could have great developments in the near future
@kashanalidjan7978
@kashanalidjan7978 Год назад
@@gabiferreira6864 As far as my project went, you'll order based on your specifics. I needed 1mm radius wires which had memorized as a straight line. I cut it in the size of my antenna and because of the memorized shape, I could completely bend everything to fit in the container. However, if you want to memorize custom shapes like the "Ve" or "NASA" we saw in this vid, I'd suppose you'd need to send the manufacturers specific details. My thesis was almost exactly 2 years ago, so maybe things have changed. It for sure wasn't like your typical DIY shops back then, but that made the experience feel more special
@SilentSolace
@SilentSolace Год назад
It’s technology like this that can affect entire industries that I love. There is so much that starts from space or military research that eventually is able to be used in wider applications by the public. We spend a lot in the US but stuff like this makes it worth it imo
@haydnw869
@haydnw869 Год назад
Too bad it wouldn’t be economically feasible or cheap enough for big companies to risk investing in
@zriyazira
@zriyazira Год назад
@@haydnw869 Planned obsolescence will probably never let these tires get to the general public.
@Konrad_K.
@Konrad_K. Год назад
Worth 1 trillion dollars??
@lonesome3958
@lonesome3958 Год назад
​@@zriyazira *impracticality will never let these tires get to the public. These Tires may be well suited for a surface like mars, but imagine driving 100 km/h+ on asphalt. They'll deform way quicker, wont be able to handle a hard surface like roads, the heat generated by those speeds will be insane, and the average car weighing more than 1500 pounds more than a mars rover these tires just arent designed for regular consumers. And thats not even touching on the price point of these things.
@Alceste_
@Alceste_ Год назад
@@lonesome3958 Maybe we should stop making our cars heavier and heavier, alternately. .-.
@n00dles4
@n00dles4 11 месяцев назад
The engineer in the red shirt gave very clear explanations and interesting demonstrations, great work all around
@randomgeek6035
@randomgeek6035 9 месяцев назад
Awesome video. Thanks for the info about nitinol!
@daxliniere
@daxliniere Год назад
This video just kept getting better and better. Amazing work Derek and team! Side note: Michelan debuted airless tyres about 20 years ago, so it's a shame we're still yet to see them on passenger vehicles.
@bjarne9321
@bjarne9321 Год назад
It is because airless tires have some drawbacks such as increased weight, higher rolling resistance and higher cost, which have prevented them not yet from being widely used in passenger vehicles.
@KeepFeedingMeImStillHungry
@KeepFeedingMeImStillHungry 11 месяцев назад
@@bjarne9321 Also without a very durable/fast way to change things like vortex generators you are limiting an aircraft's maneuverability substantially let it be agility or range. Seems like an excellent material for commercial airliners running certain routes and niche projects alike. Can't wait to see if something similar can be made with different materials and/or properties.
@Exgrmbl
@Exgrmbl 11 месяцев назад
the reason is that they feel like sh*t to ride compared to pneumatic tires. They are utility wheels first and foremost.
@jonadabtheunsightly
@jonadabtheunsightly 11 месяцев назад
Nickel and titanium are fairly expensive. I'm not sure it would be practical to use these tires on a normal consumer vehicle.
@Truex007
@Truex007 11 месяцев назад
@@jonadabtheunsightly I'm not so sure about that. We're already to the point of using carbon fiber on certain parts of the engine block, namely the pistons and connecting rods. Material sciences, 3d printing, and strange new ways of looking at engineering have dramatically changed cars before, and once consider super-exotic, are now common everyday things. The tire pressure sensors in my Mazda 2 were once debuted in the Porsche 959, at one time the fastest car in the world, as such an example. it's less about cost, and more about practicality. Someone mentioned comfort. I'd rather have the occasional flat than have a ride like falling down the stairs.
@Ragzzy-R
@Ragzzy-R 11 месяцев назад
shoutout to Dr. Santo. he is clearly so passionate about the science and explains it so calmly so its easy to understand.
@Le_Fenix
@Le_Fenix 11 месяцев назад
This is why space exploration is awesome, it leads to some of the greatest innovations😊
@bijoychandraroy
@bijoychandraroy 7 месяцев назад
This is mind boggling Can't wait for what's in for us in the future
@filipskater
@filipskater Год назад
Derek, what I love about your channel is how you treat your viewers like intelligent, educated human beings. You don't dumb down your content to the level of a five year old and you keep the clickbait to the minimum. Whenever I think youtube turned into a dumpster, your videos remind me that not all hope is lost.
@Juxtaposed1Nmotion
@Juxtaposed1Nmotion Год назад
This is dumbed down lol, nothing about the physics and thermodynamics except for "bend rod get hot"
@filipskater
@filipskater Год назад
@@Juxtaposed1Nmotion How's high school kid?
@Juxtaposed1Nmotion
@Juxtaposed1Nmotion Год назад
@@filipskater you tell me son.
@erikpasquale9902
@erikpasquale9902 Год назад
@@Juxtaposed1Nmotion why so condescending
@killer115ish
@killer115ish Год назад
Woagh tire that uses no air can be punctured??? Impossible, puncture it anyway, in fact shoot it. Because we think our viewers are dumb
@carsongbaker
@carsongbaker Год назад
That 3d stress strain diagram was incredible thank you and well done!
@list1726
@list1726 9 месяцев назад
Thanks for posting
@Thenoobestgirl
@Thenoobestgirl 7 месяцев назад
"The bones of the tire is a slinky" 😂 idk why that made me laugh so much
@GunwantBhambra
@GunwantBhambra Год назад
"elastocaloric" is the effect that happens with rubber bands too. Its exothermic when stretched and endothermic when realized. I wanted to make a cooling unit form it for so long, now I know its not just me.
@aaron41
@aaron41 Год назад
Ben Krasnow made an elastocoloric refrigerator on his channel "Applied Science". He's one of my favorite youtubers!
@thesmarttirecompany
@thesmarttirecompany Год назад
The effect in nitinol is unreal to feel. Look at her shocked face in the video! Now imagine that working FOR you in terms of fuel efficiency...
@jimmylin7233
@jimmylin7233 Год назад
I worked with nitinol about 25 years ago in the medical industry, when it was being heavily promoted for stents. It's a great material, lots of potential. Good stuff!
@joandy2749
@joandy2749 9 месяцев назад
So cool! You are lucky to be able to touch these things 🎉. I wish I will be able to touch (even more) these "iconic" objects too.
@earpiercing
@earpiercing 6 месяцев назад
I've had a henson for a while now, actually the best one i've ever used
@ovejanegra7355
@ovejanegra7355 Год назад
In my opinion, the best Veritasium videos are the ones that showcase awesome lab research + practical applications. What those NASA guys are doing is just brilliant, really fantastic work. Congrats to all of them!
@bharadwaj_routhu
@bharadwaj_routhu Год назад
The excitement in his face while Santo is explaining about the Exothermic reaction, and he being genuinely happy that Derik guessed it right, that was truly happy to look at 😁
@bodinian
@bodinian 10 месяцев назад
This became more interesting the more I watched. This is captivating content!
@akaaka9091
@akaaka9091 9 месяцев назад
You have some cool cinematographeers for sure.... Love the video
@AU_TRL
@AU_TRL Год назад
Did my masters thesis on modelling and simulation of shape memory alloy actuators and I’m happy you are showcasing this to a broad audience. Awesome stuff
@hydropotimus
@hydropotimus Год назад
I'm a racer, trucks, motorcyles, sand dunes and I loved this video! The spring interlay, layout reminds me of when I used snow chains in the sand dunes with a 1 wheel drive truck and tiny street tires, it worked.
@GoldenGrenadier
@GoldenGrenadier Год назад
Broken axle or just an open diff?
@ShannonJacobs0
@ShannonJacobs0 Год назад
The google will quickly censor this question: Why are RU-vid comments packed with circle-jerking sock puppets? Obvious, as are the countermeasures--but the google wants fake "engagement", the better to sell clueless ads.
@mastershooter64
@mastershooter64 Год назад
Damn you're a racer and you're a truck and a motorcycle and you're a sand dune?? that's awesome dude I hope I can be a sand dune one day
@Idiomatick
@Idiomatick 11 месяцев назад
I wish you did a segment on the downsides instead of just the upsides. There is a reason these aren't everywhere.
@squidwardo7074
@squidwardo7074 5 месяцев назад
is it just the cost or is it something else?
@Idiomatick
@Idiomatick 5 месяцев назад
@@squidwardo7074 Oh, I'm not an expert so I was genuinely asking. Realistically, they will need to be covered so they don't fill up with junk and change the driving dynamics, and they'll need rubber tread for traction... A puncture in the tread wouldn't do a whole lot since the tires wouldn't be pressurized which is nice, thought you'd still have to patch it eventually so the tire doesn't fill up. It could have thinner rubber on the sidewalls (no pressure) but overall would probably be about as heavy due to the metal. And the price of course would be enormous. Even if they work out economy of scale issues, you're talking about doubling the cost of your tire in metal costs alone. And the only benefit is that you can't pop a tire. Probably worth it for the military and maybe some other niches. Might make sense for planes. And of course rovers. Its cool tech though so... I mean, I hope they figure out all the issues. Oh, and shape-memory metal is super super useful in a million areas they barely touched on :P its just a bit pricy
@Ciurk
@Ciurk 10 дней назад
Pretty sure it’s just the sheer cost of making it, not profitable I suppose
@cenziclopedia
@cenziclopedia 11 месяцев назад
hey... I just gotta say thanks for the hundreds of videos of yours I've seen!
@mykelmiller1
@mykelmiller1 11 месяцев назад
The temperature, strain, stress graph at 10:58 was so helpful. Thank you!
@amritanshubarpanda1325
@amritanshubarpanda1325 Год назад
The last segment of shaping the nitinol to "Ve"was a great touch. Do that everytime with the things you make videos about. It adds a certain feel to the videos. Like with the cement video, you could have carved "Ve" into some permanent structure while the cement was setting.
@itsbishop2285
@itsbishop2285 Год назад
that’d be sick
@lombre9149
@lombre9149 Год назад
@Repent and believe in Jesus Christ Jesus aint taking these wheehls
@lombre9149
@lombre9149 Год назад
ok mobile youtube is so fucked i cant even edit my typo this si so sad
@justinlawlor3898
@justinlawlor3898 5 месяцев назад
This is amazing, everything should be made of this stuff
@bbbenj
@bbbenj 9 месяцев назад
These materials are amazing 😀
@lsdave
@lsdave Год назад
The people that work at this company are some of the luckiest people in our workforce.... you can just tell how excited they all are to show what they are developing which they all seem to love. Love what you do and never work a day in your life.
@tfr
@tfr Год назад
Although simple, wheels are taken for granted so much. They’re so awesome and a great invention Great video :)
@briteeyes2133
@briteeyes2133 Год назад
Why not use in tires on earth? Because it would put companies out of business. Everything on earth they make to be replaced, over and over and over again. $$$$$$
@harmish9265
@harmish9265 Год назад
​@@briteeyes2133 watch from 22:08
@briteeyes2133
@briteeyes2133 Год назад
@Harmish :) yes, they know they would work on earth but I seriously doubt they would mass manufacture them for the average man on the streets. Much like the free energy Tesla discovered or the cars people invented that ran on water, it would cause the shutdown of major corporations. There are so many great inventions not available to the average man. Many inventions that the govt will buy the patent just so it cannot be manufactured for use by civilians.
@lonesome3958
@lonesome3958 Год назад
​@@briteeyes2133 impracticality will never let these tires get to the public. These Tires may be well suited for a surface like mars, but imagine driving 100 km/h+ on asphalt. They'll deform way quicker, wont be able to handle a hard surface like roads, the heat generated by those speeds will be insane, and the average car weighing more than 1500 pounds more than a mars rover these tires just arent designed for regular consumers. And thats not even touching on the price point of these things.
@leftaroundabout
@leftaroundabout Год назад
@@briteeyes2133 it's hard to appreciate just how good pneumatic rubber tyres are. The rubber fulfills three roles at the same time (containing the air, deforming around unevennesses, and giving traction to the ground), whilst the air manages to support a big weight with very little obstruction to the deformations / rolling. Those nitinol tyres do a formidable job at replacing this functionality, but they can't do it all as well as pneumatics. Unless you need your tyres to work at insane temperatures or survive deliberate perforation (and can't use liquid sealant), there's just no point.
@johnathanhenley2251
@johnathanhenley2251 3 месяца назад
Sometimes, I think I might be intelligent when I devise an outside of the box solution to a problem at work. Other times, I watch things like this and know I am absolutely not. This video was spectacular. Thank you for sharing this.
@otavioalmeida6638
@otavioalmeida6638 Год назад
Great video! I'm doing a PhD in a lab where people explore the potential of NiTi, it's really cool to see it being diffused by you guys!
@therabbidt
@therabbidt Год назад
My god this is impressive, I never imagined metal replacing rubber tires and being very effective at that like wtf
@dax3m
@dax3m Год назад
One thing which wasn't covered is friction - because if the friction this material provides is close to or surpasses that of rubber, then bar astronomical manufacturing costs even with industrialization, we should technically be able to use it on vehicles.
@therabbidt
@therabbidt Год назад
@@dax3m oh my god
@skylined5534
@skylined5534 Год назад
You ought to see in other dimensions, they're pioneering the use of metal for wheels!
@11x334
@11x334 Год назад
It's funny when we started threatening super pedo Island all of a sudden the miracle tech came back out
@user-jq6ts2kg2o
@user-jq6ts2kg2o Год назад
I think it only replaces air inside rubber tires, you still need rubber to make a practical real (Earth) world tire. Otherwise if you were to just use the mesh, small debris would make their way into the tires, and be impossible to get out. That's why they still had rubber in that bicycle demo.
@squidwardq.tentacles4743
@squidwardq.tentacles4743 9 месяцев назад
These men are so proud of his work
@user-vg7jc7hy6z
@user-vg7jc7hy6z 10 месяцев назад
How brilliant and simple of application once we gain practicality all things are
@HeisenbergFam
@HeisenbergFam Год назад
It warms my heart to see Veritasium giving a kind shoutout to unknown agencies like NASA
@tfr
@tfr Год назад
Yeah. Who even is NASA? No Apples Saturday Afternoon? Why do we need an agency for saturday afternoon apples?
@dummmee5736
@dummmee5736 Год назад
so nice of him
@docilelikewintercatfish9897
NASA is so underrated. They deserve so much popularity
@docilelikewintercatfish9897
​@Don't Look At Profile ok
@tommyfanzfloppydisk
@tommyfanzfloppydisk Год назад
Engineer : this could be the wheel for everything Tires and Rubber Corporation : _i will take this personally_
@SarojMohan783
@SarojMohan783 5 месяцев назад
Such a nice video Derek
@joshuanicolai4776
@joshuanicolai4776 10 месяцев назад
I remember when people first started talking about nitinol and i had no idea it could be used for so many applications
@the4fibs832
@the4fibs832 Год назад
Shoutout to Cameron Hughes for using nitinol in his fashion designs. He runs a current through the wire and the piece changes shape - length of skirt, structure of shoulders, etc. Very cool.
@knaspelut
@knaspelut Год назад
Ok, this is the first time I hear about Nitinol. I've not been this enthralled by the science behind a material before. It''s actually extremely interesting. I wanna know more! :D
@stephenolan5539
@stephenolan5539 Год назад
I had a small piece of it 40 years ago. I read about it in a Science magazine and they had a contest.
@JorgetePanete
@JorgetePanete Год назад
It's*
@scotshanley
@scotshanley 10 месяцев назад
Easily one of your most interesting episodes. I enjoyed it immensely thank you. 👍👍
Далее
The Hidden Science of Fireworks
31:11
Просмотров 3,7 млн
Testing the US Military’s Worst Idea
24:39
Просмотров 12 млн
ЫРКА! НИКОГДА НЕ ОБОРАЧИВАЙСЯ!
11:10
This is why we can't have nice things
17:30
Просмотров 21 млн
How NASA Reinvented the Rocket Engine
18:11
Просмотров 2 млн
How Do Night Vision Goggles Work? (There's 3 types)
27:16
How Japanese Masters Turn Sand Into Swords
25:27
Просмотров 7 млн
The Fastest Maze-Solving Competition On Earth
25:22
Просмотров 18 млн
A New Way to Achieve Nuclear Fusion: Helion
30:48
Просмотров 7 млн
Should Airships Make A Comeback?
21:27
Просмотров 3,3 млн
ЫРКА! НИКОГДА НЕ ОБОРАЧИВАЙСЯ!
11:10