How Tight Or Lose Should Main And Tail Blades Be!? 

Yeah it's good to mention that nylon locking nuts wear out and some really don't fit that good to begin with when you mix and match hardware. They have cured many problems in the RC world. After hearing different opinions starting out I found out that your right. You can get away with being looser but they can quickly get too loose and cause the helicopter to shake hard on start up. I have found that some cheaper blades can have tight and looser spots when you check the whole arc of the blade by hand.

Excellent stuff

Bam! Another winner from JW. Thank ya sir.

Hey boss, again I appreciate the videos. If you do see this I got a suggestion, when you do a build a heli next time or even your previous builds, what if you cover some of the cost and equipment breakdown and where to buy everything? I always wonder why some place sell the kits, batteries, and FBL and then you have to shop around to buy the servos somewhere else. I think we need some sort of video breakdown of where are the best places to purchase everything (discount included if available) and maybe options of top end and decent equipment setups. I know that you can go about spending $500 or $2000 but seeing the differences in prices and best outcome is what everyone might be shopping for. Also give you some referral links as well for the effort. I don't see anything out there that covers this and with the passion you have for helis I think it could be a start of something that can definitely give you more audience!

DJI uses foldable props for their camera drones but tbh for actual quad racing it is all about stiffness... When I got into R/C with helis back in the day I learned the blades should be loose enough to straighten themselves out but getting back into helis now I just go with what WestHobbiesRC said and have them not "fall down" when you're shaking the heli a little. ;) cheers everyone

Keep the good information coming Jeff. Always good to see what’s going on @ Westhobbiesrc 🎉

Thank you for making this. Great job!

Great video again Jeff. Love your content.

A great video yet again Jeff ! I use the stock ESC that comes with the Goosky RS4 and the initial spool up is imo too aggressive, even if I move the throttle to 10%. So blade tightness is really important, thanks for sharing that with us. Would have been great as well to see two comparison videos of a spool up with a loose and a tight blade.

I like you, run mine with a bit of resistance but not having to force the blades to move. Great video

Thank you,this is really helpful to me. I've just purchased the align trex 450lp dominator. I've currently got the omp m1 and m2 evo. This info/video is going to be very helpful to me thank you 😊

Yet another great informative video!! Thank you and keep it up!!

Thanks, your videos are always informative. I bought my first SAB, RAW 580 and my RT Ultra blades will not fit with a blade washer. Can I run without washers? Due to medical reasons I have not flown it yet but when I do I want to be sure everything is OK. Thanks for the tip on the screws for the canopy attachment.

Good info. PS Jeff, regarding the Goosky S1 tail blow out I found that my tail blade would rotate in the tail motor under moderate pressure even with the screw torqued. I had to replace my tail boom due to previous crashes due to tail blow out and so I just replaced the tail motor while I was doing that boom work, and of course a new tail blade. Also a new main shaft and feathering shaft. Well that fixed my tail blow out issues. Also the helicopter is incredibly smooth again. Regarding the S2 it has never been crashed and I checked the tail blade and it will slip under moderate to strong pressure so I tightened it even more. Unfortunately that did not fix the tail blow outs I'm experiencing with the S2. It's unfortunate because now I don't have confidence doing maneuvers at low altitude. I am hoping you are able to test and let me know what you come up with as I'd really like to fix mine if possible. Or I'd like to know if it's just a characteristic of this helicopter. The maneuver that I found will blow it out every time is an inverted loop with max elevator.

Hey brotha love the content and what you’re doing. I have a simple question, do I have to save my settings in the IKON2 when a new update is available?