Please help! I got a Subaru Ascent that was rear ended. Still has a bit of damage to where the blind spot bracket sits. I get the code for misalignment of the right radar. I have no idea how to do the measurements and from.where to start. Also, what tools will I need to get the radar alignment done. Is the corner reflector needed if so what that does or help with the alignment? Please explain to me as much information as you can. thanks!
Can you help me for blind spot alignment i have reflector i did every measurent as you did i got reflection also on techstream but now there is no reflection is shown in form of degree i dont understand what happened suddenly
My wife's RAV4 has BSM Malfunction alert turned on. I try to DIY to fix it. I bought a mini VCI J2534 OBDII to USB adapter. Got Techstream v16 software installed and ran. The error code shows the BSM Master beam axis needs inspection and do adjustment. I home made a reflector but fail to the inspection, The error dialog shows ".. refer to the Repair Menu for the reflector position ..". Please help if you know 2017 RAV4 BSM reflector position, distance, etc. info? What is reflector dimensions/measurements? Thanks.
Hi , wow Pretty impressive for a DIY 👍, If you got a diagnostic code for alignment inspection the vehicle probably got bumped and the radar bracket is misaligned, From the center of the rear bumper to target his place between 501 to 521 mm to the rear ,left or the right the target is placed 3159 to 3179 mm from the center of the rear bumper the height of the target is 540 mm , I would suggest to remove the rear bumper and inspect boat Blindspot brackets ,