How to achieve a super high gloss clear coat 

British Stephen hawking

Stephanie hawking

hahah great joke, still I prefer this robotic voice than mumbling low voiced idiot or an overhyped screaming twat

😂🤣😂🤣😂🤣🏆

@@riskromer9773 hi guys, chrisfix here

Sorry to be off topic but does someone know of a trick to log back into an instagram account..? I was stupid forgot the account password. I appreciate any tricks you can give me

@Leandro Gerardo Thanks for your reply. I got to the site through google and im trying it out atm. Seems to take quite some time so I will get back to you later with my results.

@Leandro Gerardo it did the trick and I actually got access to my account again. Im so happy! Thanks so much, you saved my ass!

@Izaiah Ralph No problem :D

@@leandrogerardo4554 Do people actually fall for these fake exchanges? It's so obviously a marketing ploy.

callum matheson Interesting info. I usually wait 2 days after applying clear coat before I apply wax and I'm happy with the results. Is it because I could be using a better product?

callum matheson Also never cover a freshly painted surface with poly sheet in an attempt to keep dust off your new paint job for the same reason. It can cause micro blisters, so you'd end up having to strip it all off again to start over.

Great info, fren. Thanks.

Ah

You must be blind there was still sanding swirls and little craters all over.

Do you have any recommended products or brands?

@@tipr8739 id like to know too

@@MrShazaamable Spraymax 2k in a can. It has isocyanates like all 2k's so you have to wear a mask with a charcoal filter and some eye protection since you don't want the 2k cloud to be anywhere near your eyes. Also wear long sleeves.

Only wet the 1500?

It's a spray can job.

***Straight*** . When you see the wiggly line under a word that means it is misspelled. Just a tip

haha

😂

miiIIIIICRO-fer

Moicrouw foibahh clouth

Thank you... that was very helpful

From that - twe thiss - from that - twe thiss. Thiss video hass both subtitless and a AI'sssss. Note : in a Human way your comment is underrated. P.S. This video is actualy helpful and we are making jokesss

My-cal-freabbba

@@brianroberts5616 just a joke, relax.

Everyone knows that's the best way to do it :)

@@ArcanePath360 Well that's only if you want a professional job.

@@DeerDoe Funnily enough I've done stuff like this in the past, when painting metal frames, a guitar or anything small. Hammerite is great shit for laying on thick without any undercoat or smoothing and just leaving to gloss up.

The door isn't done yet if you look at it at the ending, he would do the same on that panel. He even said to do this 1m² at a time.

RU-vid cements section is the sewer system of humanity.

shut up

MR SLAV it's based on how thick is the clear coat

I agree

Agree with?

Too big as in what, too course or not course enough?

MR SLAV 800 on a machine is like 1600 by hand, not sure if that counts using that buffer though :)

You did it yourself moron

@@exoticwaves1580 what do you think the video is for? Idiot. Lol.

@@exoticwaves1580 - I KNOW, RIGHT? What kind of an idiot watches a RU-vid video, narrated by Siri, depicting a guy buffing & polishing the clear coat (of what I assume is *HIS OWN* car, Siri never actually cleared that up) in (what I assume, again, is his *OWN DRIVEWAY,* *Damnit Siri* this shit’s important!) and thinks “wow, this result looks great! Clearly I have the same, or similar problem, or why would I be watching this video?? There aren’t any cats knocking full glasses of water off the table, or wearing slippers....no kids hitting their dad in the balls in a sports related accident....it’s not even funny at all...so, this probably isn’t something I watched for the entertainment value........since I have the same, or similar problem, I’m going mimic the instructions here in an attempt to “DIY.” If this guy & Siri can do it, I can certainly trust them. Surely no one would ever put this much effort into creating a DIY video if these products & methods only serve to make the situation MUCH worse?” Then what? They just go to Walmart, or Auto Zone, or whatever...and buy all of these materials, and attempt it on their own?!?! Who does that?? Like, who doesn’t have $300 to pay a body shop to get you that “super high gloss clear coat” like the guy in this video did for the car in this video? Some people are just stupid.

@@DrAnderson1 yep

This guy doesn't want to be responsible for his lies! So no face or voice!

2,000 is minimum I’d say tbh. Especially with the cheaper clear coats the DIYers (like me) use. Always start smooth then if need be go rougher

@@scottwhitley3392 The lowest i go is 1200 up to 3000 then polish

@@KOKAI325 what if I sand by hand

@@fitnessja7047 i sand by hand and DA

800grit by hand are fine if you sure that your clear coat are thick enough But using 800 grit on a da? That scared me too lol🤣

He obviously used a spray can to paint with as the lower and uncontrolled spray pressure causes orange peel especially if you paint outdoors. He got the results he was looking for and pretty good for not in a booth and rattle cans

@@Lucas_Shaolin normally spray can paint jobs turn out much much better than that.

didnt help it was snowing.....entire vid is a disaster

You’ve obviously never sprayed clear. otherwise you would know, no matter how good you are you will get some orange peel.

@@Imissthefuhrer yes, some. But this paint job came out absolutely terrible

Amateur video

Lmfao!!!

TheDim3s for better job i sanding with 2000 paper..and finally 3000.and polish with polisher.than wax by hand

2000 and 3000 paper..matador sand paper for best qulity ..

Same

only wax 1 month after applying clear coat

@@АлександърЛюбенов-ю1й I understand that sometimes you should wait a month till you sand down but if you wait a month the clear hardens and it's way more tough to sand it down. It all depends how much orange peel you get from using the clear coats too. There's too many pros and cons during painting process

@@jonathantenorio8829 lol 2k clear out of a spray can its hard to spray.. u need to be experienced and even then i think u will get a orange peel

Id argue this till blue in the face. 2k clear out of can is trash, not better. I proved time and time again. Ot peels after a uear. Comparing apples to apples. 1k is 100% better out here of a can. Spraying with a gun is another story. Upol expert can clear is top notch for a can

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FlTWa18NUTs.html

书中自有黄金屋 BKR probably could have responded in a softer tone for those who are sensitive. The correct and very helpful information BKR stated will help others follow effective procedures .

you don't get the point of his tutorial.

Island Mike wow, triggered much? Chill my man, no need to go to that level.

andrew c Many cant afford the equipment to do the fine mist job of the spray guns/large compressors. It's good to see that there is hope for rattle can painters who are just trying to make their cars look less like the bucket they can afford. Look at the big picture before slamming a dude who is nice enough to share for free. It really is a great video.

It is a video about how to fix a fuck up :)

Chill out guys!!! It would help if the stupid thing would say the words correct then people don't get fucked off with the videos

Johnny Harris. Siri also does gender correction

How many passes with the 1000 grit

Do it by hand and be very careful.

A very small liar? 😂

Rinse with water

Did you?!??

Me too, on my door....😢

Brian Andrews The two foot section he did the demonstration on was smooth with a high gloss when he was done.. the orange peel you saw hadn’t been touched yet

This is the great answer and works even if you make few mistakes. I do apply a clear coat after sanding with 1500Grid

How long actually we have to wait for fresh clearcoat to cut and polishing?

@@fyzallyfe2210 At least 24 hours preferably.

@@JonSmith-cx7gr where could I find a 10 grit sand paper? I don't want to kill the guy.

hey man i know your comment is a little old (lol) but i have a couple questions... so i sprayed my car with acrylic urethane paint and im not sure if i must apply a clear coat or if the shine is already in the paint?!?! hope you see this and can help me!!!

Regardless, most clear coat applications will result in some orange peel but in his case it seems like he either applied it when the temperature was a bit cool or it dried in "cool" conditions