How To Actually Tune A Chainsaw!

Подписаться 21 тыс.

Просмотров 1,4 млн

50% 1

In this episode of American Piddler we show you, HOW TO ACTUALLY TUNE A CHAINSAW! We end up using the Husqvarna 455 Rancher and show you the CS 306 ECHO & also the Stihl 024 AV chainsaws. If you've ever wanted to adjust your chainsaw carburetor you need to watch American Piddler. We discuss the importance of the idle setting the low speed setting and also the high speed setting on the carburator of your chainsaw! The key thing to remember is to do it in this exact order set your Idle then the Low speed then the high speed! I also let the viewers know where to buy the tools need to actually tune your saw.... the tools that the dealer won't sell to the public! my affiliate links are below for the following.... both splined screw drivers you may need the chainsaw tachometer the chainsaw sharpening guide and also screnches
SEND US FAN MAIL!
American Piddler
P.O.box 676
Waynesville, Ohio
45068
👇 AFFILIATE LINKS 👇
Carburetor Spline Tool Kit
amzn.to/2J0kB5n
Plugfones wireless amzn.to/2Qp7cso
Plugfones wired- amzn.to/2L6Yh9m
Here is the wireless Tach
amzn.to/3BmD1Y9
And here's the link for the less convenient wired tach
www.amazon.com/gp/product/B01...
Link for splined Screwdriver
www.amazon.com/gp/product/B00...
Link for other Splined Screwdriver
www.amazon.com/gp/product/B00...
Amazon link for chainsaw sharpener guide...
www.amazon.com/gp/product/B00...
Link for Srenches....
www.amazon.com/gp/product/B01...
Link for Bench Vise
www.amazon.com/gp/product/B00...
My Amazon affiliate links for the gear I use! This IMO makes smartphone filmmaking way easier!
Smartphone Microphone
amzn.to/2GyHNrJ
Microphone adapter cable "YOU MUST HAVE THIS" w/rode mic
amzn.to/2BBYYDi
Smartphone Flim Rig
amzn.to/2GAB3cZ
11" Friction Arm
amzn.to/2Bzcibv
Rechargeable LED light
amzn.to/2Rb9WJH
OSMO mobile 2 Kit w/tripod
amzn.to/2SfdZC3
FACEBOOK
/ americanpiddler
INSTAGRAM
/ americanpiddler
TWITTER #AmericanPiddler
Check AmericanPiddler @ AmericanPiddler?s=09
Music: "Cripple Creek" Performed by myself American Piddler on 5 String Banjo
#chainsaw #repair #Maintenance #adjustment #tune

Хобби

Опубликовано:

3 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@AmericanPiddler 2 года назад

Carburetor Spline Tool Kit amzn.to/2J0kB5n

@theamerican7080 Год назад

Thank you!

@alienseven 2 месяца назад

Finally someone explains what all 3 screws do instead of just the H & L. Best carb adjustment video out there. Thanks for this.

@Urban_Tarzan Год назад

Great video!!! I had a McCulloch chain saw for years and it just stopped running, tried everything I could think of to no avail. I bought a new saw about 5 yrs ago and now that one wasn't running very good. I used your video to tune it up and it's running awesome!! I went back to my old saw and tuned it up and it's running like new !!!! I also have a gas hedge trimmer that wouldn't run and now it's running like new !!!! This video literally just saved me about $1000 !!! Well done!!

@daveellson962 Месяц назад

Best demo I’ve seen using all 3 screws

@user-bj4lb1sz9t 3 месяца назад

The machinery industry is not just about technology but also about innovation and application.

@donbrearley3148 Год назад

The finest saw tuning guide I've yet seen. Thanks man, got my saw running again.

@SimpleLife1971 5 лет назад

This is by far the best narrated "how to adjust your 455 Rancher" video I've ever watched! Thank you!

@AmericanPiddler 5 лет назад

Night force thank you for watching and Keep on Piddling! #americanpiddler

@iand9992 12 дней назад

First rate info, just retuned my Oleo Mac 400, after watching your video. Clear & concise. As you say over the pond Great Job and thanks again

@kenproctor6517 8 месяцев назад

Hands down the best video for getting a chainsaw back to spec for fuel adjustment. My Husq 460 Rancher was in need of serious maintenance. Changed out the air filter, spark plug, new chain, set the bar and chain tension and other lube requirements. THEN I came across this video. I had the right tools already but just couldn't get it to run good. I followed these guidelines in front of my PC, then set the saw down. Took it out in the morning and it started right up! Did the fine tuning instructions and now it is as good as when it was brand new! Thanks Piddler!

@captainkepcon8194 2 года назад

American Piddler is the Man. There's no way I would have know about the spline set screws. Providing the link to get it was very helpful. Now I'll go out and se if I learned anything.

@davidjohnson7809 Год назад

Best explanation for chainsaw carburetor tuning on the net. Very easy to understand.

@AmericanPiddler Год назад

Appreciate that! Thanks for watching don’t forget to subscribe and keep on Piddling

@dereksmith4791 5 лет назад

Thanks a ton, am trying to tune my husqy blower & poulan saws and while I've had a love-affair with steve's saloon channel, there's a huge benefit from getting varied approaches to the same thing, watching your video is filling-in a ton of the lil Q's I had from his so am truly thankful to you both!!!

@AmericanPiddler 4 года назад

Love the small engine saloon! Glad it helped sure appreciate you watching & taking the time to comment! Send me a pm and I'll send you a channel sticker! #americanpiddler

@danjackson6388 2 года назад

THANKS! I'm an auto technician, but I don't work on two-strokes very often. Your video is one of the best ones I've seen yet, and yet it contains 1000 less words than some other videos. You got right to the point, and clearly described the process. I was fixing a friend's Husky 55 (new carb, among many other parts) and got the screws tweaked just right, and now it's powerful and snappy. Thanks for taking the time to make a well-thought out, intelligent, no BS video. Cheers!

@AmericanPiddler 2 года назад

Thanks for the encouraging words! Thanks for watching don't forget to subscribe and Keep on Piddling! #americanpiddler

@balenaluba4215 2 года назад

I didn't have any Idea about 2 stroke engines, now I'm a level 99 chainsaw pro, thank you.

@chrisferrante9699 4 года назад

Thought my saw needed a new carburetor. After taking it apart and cleaning it good... following these instructions got it running awesome! Thanks for the video!

@AmericanPiddler 4 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@augustowaloonski6 Месяц назад

I want to say thank you!! Your presentation was easy to follow, and you are well-spoken. I appreciate you taking the extra time to point out the danger area of the high side. My saws run like new again. Thanks again. 👍🏻

@TennTom_Times 4 года назад

Just wanted to throw my praise of this video in with the others. I've watched it before. It's excellent and very informative. God bless.

@AmericanPiddler 4 года назад

@J.R. Harbison Thank you I hope you've subscribed! Thanks for watching and Keep on Piddling #americanpiddler

@markmaier9184 4 года назад

Thanks so much for taking the time to make this video. My love/hate relationship with my chainsaw and other 2 cycle tools has been completely healed after watching your straight forward video. One bonus for me was watching you use the bench vice to hold the saw. (Duh!j just never thought of doing this ha ha...If tightened way down this is so helpful keeping the saw from moving while making the adjustments. Again really nice work I really appreciate it!

@AmericanPiddler 4 года назад

Glad it helped! Should have another 2 stroke episode very soon make sure you subscribe! Thanks for watching and Keep on Piddling #americanpiddler

@douglasherlihy8860 5 лет назад

Well done! I'm the tool guy for our shop. I maintain and fix about $200k of machines and tools. I'm constantly researching info, parts, troubleshooting and repairs on every kind of tool one can think of. This is the best small engine carb tutorial on the internet. Got the shop's Poulan Chainsaw working after rebuilding it due to rotted fuel lines. Wouldn't run until I did your tuning tips. Thanks. Hopefully you're starting to get some kick backs from all the ad money RU-vid is making off you by now. Cheers.

@AmericanPiddler 4 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@juliandacostaandrade760 2 года назад

By far the clearest video on how to tune a saw. Thankyou

@chocolategravyandbiscuits8418 Год назад

Thanks man, the rancher is running like a champ again between your video and the woman that shows how to pull the carb off of one of these.

@richardwallinger1683 3 года назад

I am a 76 year old know it all. Loved your video presentation .top quality . didn,t learn anything new but then I am a mr know it all. I loved the Walbro presentation if you plan to leave your chainsaw / strimmer unused for more than six weeks drain the fuel out and refill with fresh fuel-mix.

@AmericanPiddler 3 года назад

Richard Thanks for watching don't forget to subscribe 😉 Keep on Piddling! #americanpiddler

@dukelawr 5 лет назад

Hands down one of the most helpful videos on adjusting carbs. Had to subscribe after watching.

@AmericanPiddler 5 лет назад

Thanks for the support and for watching! Keep on Piddling!

@kongcheung9403 4 месяца назад

I see so many tuna carburetor adjustment, and I think you’re the best because they didn’t tell you you got a turn in the only lotta lotta people just do it but they don’t tell you turn in and turn out. Thank you.

@rtchow3000 7 месяцев назад

even though an old video on chainsaw tuning, i was fortunate to run into this video just the right timing. i checked all over UT and this was the most easiest one to follow. i did exactly as he said and wrote the steps to follow. next morning i put the chainsaw blade area on the vise as shown in video and wood blocks to keep it proper heigh level. i got the common tools to fit into the holes. did as he said. took me couple pull and it started. while running, i adjusted the low/high and idle as he prescribed. now this chainsaw will be very useful to cutdown firewood for my grill. thanks for the belated video.Bob

@ronaldmcdonald3965 2 года назад

Thanks. Your video kept me productive this afternoon. I was bogging, and don't know how to adjust my carburator. It wouldn't even start, since I screwed up the settings. But I followed your process and got it operational and completed most of my to do list.

@IanRossDownham 3 года назад

Thank you so much for this video. I'm in the UK and was going to have to wait 4 weeks to get my saw "serviced" as it wouldn't start. Thanks to your video its now running superbly. Cheers

@AmericanPiddler 3 года назад

Ian that is excellent news! Thanks for watching and keep on piddling! #americanpiddler

@cracker3924 Месяц назад

Give this legend a thumbs 👍🏻 up All the way from Australia 🇦🇺

@jkellynewman9203 5 лет назад

Awesome video! I tuned my '93 Husky 232r and it wiped out the yard without a hitch. Thank you for this great 2 stroke carb tune video!

@AmericanPiddler 5 лет назад

Thanks for taking the time to comment and thanks for watching! Keep on Piddling!

@peterhandelson1193 3 года назад

Thank you, this is the only video I found that explains tuning from zero. Much appreciated.

@AmericanPiddler 3 года назад

Peter Thanks for watching and Keep on Piddling #americanpiddler

@spyropyro3159 4 года назад

Absolutely wonderful explanation for a beginner like me! Thank you!

@AmericanPiddler 4 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@SimpleLife1971 4 года назад

This is where I learned to properly tune my Husqvarna 455because no one takes care of my tools better than me! Thanks in advance!

@AmericanPiddler 4 года назад

Thanks for watching & keep on piddling #americanpiddler

@toonybrain 2 месяца назад

Agree

@travistucker6553 4 года назад

Thanks just rebuilt my Stihl 028Av wood boss, put a super top end in and could not tune the carb, watch your video and boom runs like a charm, felt so stupid that it was that easy. Thanks again man love From the PNW.

@AmericanPiddler 4 года назад

Glad it helped! now you can share your knowledge with others! Thanks for watching & keep on piddling #americanpiddler

@KOSTISELMA 4 года назад

The only understandable video how to tune a chainsaw. I wanted to tune my chainsaw and ask some technicians what means and how to regulate the "L" and "H" screws and they say to me oh no do n't tuch it's very difficult and dangereus. Hahaha i am going to teach them how easy it is. Thank you very much bro. greetings from Greece

@AmericanPiddler 4 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@1227air500 4 года назад

Just found your channel and subscribed. You have a real knack for clearly sharing and explaining the "tricks." The tricks are what make the difference between getting the job done and just fumbling around. Many thanks.

@AmericanPiddler 4 года назад

Super stoked to have helped! Thanks for watching and Keep on Piddling #americanpiddler

@kevinnicolay5331 4 года назад

thank you for this video. your instructions are easy to follow and very clear. You make it clear which way to turn the adjustment screws. So many of these guys just say to adjust the set screws all the way in, but at times i forget which way it is when turning the adjustment screws which in my case is a huge help. I'm subscribing right now. Thanks again !!!

@AmericanPiddler 4 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@youretheai7586 3 года назад

I just got my first chainsaw and this was an extremely helpful video. Thanks!!

@AmericanPiddler 3 года назад

Thanks for watching don't forget to subscribe! Keep on Piddling #americanpiddler

@wespetit150 3 года назад

Finaly an explanation thats easy to understand, thx mate, helped me a lot. Cheers from belgium

@AmericanPiddler 3 года назад

Thanks for watching glad it helped! Don't forget to subscribe and keep on piddling! #americanpiddler

@Gunrunner223 3 года назад

You may not see this comment since this is a year old, but I subscribed cause I am also a professional PIDDLER! Sad to say, we are a rare breed in today's world. Stumbled onto this video and when I saw you were adjusting a husky, I had to watch. I was given a blown up husky 350, and I bought a Meteor head and piston rebuild kit, and re built it. Bought a modded muffler with a small straight pipe and slightly polished the ports on the head while building. But, I've rarely ran the saw cause it just wasn't adjusted right. Your video was a TON easier to follow than the pro guys. Thanks for helping a Alabama PIDDLER out! I plan to keep watching more of your stuff and getting ideas. Keep on piddling bro.

@AmericanPiddler 3 года назад

Russel glad to hear ya got that husky running right! Appreciate the sub as well! Thanks for watching and Keep on Piddling #americanpiddler

@deanjones2525 9 месяцев назад

I want to thank you for your video. It helped me a lot. I don't live where I have competent chainsaw technicians, so I appreciate that you took the time to share your knowledge.

@stevie6420 4 года назад

Thanks for the video not only did you show what you done but u explained what to listen for... That was very helpful... Just subscribed 👍

@AmericanPiddler 4 года назад

Thanks for the sub! Thanks for watching and Keep on Piddling #americanpiddler

@woofy548 4 года назад

great vid. Probably the best carb tuning vid Ive watched.

@AmericanPiddler 4 года назад

This is why we do what we do! Thanks for watching and Keep on Piddling #americanpiddler

@HankinsExcavating 5 лет назад

Great explanation of it all!!! Very simple clean, no extras. Great video!!!!

@AmericanPiddler 5 лет назад

Ryan thanks for the kind words and for watching! Don't forget to subscribe and stay tuned there's another saw video coming soon!

@samnicholas434 Год назад

Excellent excellent video. I had her adjust your saw. You’re the first owner to shove it. Kudos to you.😊

@pauldever4901 4 года назад

a trick I use, a paint mark on my adjusting tool makes it easy to keep track of the turns, great video thanks

@AmericanPiddler 4 года назад

That's a great idea! Thanks for watching and Keep on Piddling #americanpiddler

@johnealy6916 4 года назад

thank you I screwed up and couldn't find a video where any body started from beginning like that so thank you very much

@AmericanPiddler 4 года назад

Very welcome! Thanks for watching and Keep on Piddling #americanpiddler

@Diver1215 Год назад

Just saw your video. This is exactly what I needed. Thank you for taking the time to make it. Much appreciated!!

@bungholeofdeath 3 года назад

A friend let me borrow his 240, and it kept wanting to die when I’d use it. I just wanted to say thanks a ton, very descriptive and not like the other vids I’ve seen where all they say is do this and don’t do this. You’ve helped me out a ton getting this thing running.

@AmericanPiddler 3 года назад

Very cool this is Exactly what we do on this channel! Thanks for watching don't forget to subscribe and Keep on Piddling! #americanpiddler

@felipesandoval7593 5 лет назад

Good vid buddy. Thnx every piece of info always helps from everyone always good to share info.

@AmericanPiddler 5 лет назад

Thanks for watching and the kind words! Excited to have you on the channel and being active leaving comments! Thanks again!

@brianpollickjr5345 5 лет назад

Awesome video! I've been struggling with this for a while until now.

@AmericanPiddler 5 лет назад

Brian that is great! This is exactly why we make videos! God bless you and Keep on Piddling!

@trimbaker1893 2 года назад

Hello, fall is in the air and I looked up your video once more...Thank you, My 460 thanks you too. Smiling, George.

@christophercarter7235 2 года назад

Thx good advice and stressing that more is not always better. I like the fact that you start from a basic setting and tune from there.

@PBS-nm1uu 5 лет назад

great presentation, please keep them coming.

@AmericanPiddler 5 лет назад

Thanks for watching and Keep on Piddling!

@leoramirez4024 5 лет назад

Great video I find marking the splined tools also helps out thanks for sharing

@AmericanPiddler 5 лет назад

Yes that is a very good way to keep track! Thanks for the little helpful tip!

@thomasbonnell8009 5 лет назад

Great tips . You got me out of a jam. Thanks

@AmericanPiddler 5 лет назад

@@thomasbonnell8009 that's why I do what I do! Thanks for watching and Keep on Piddling!

@cg7494 4 года назад

Great video. I too love my Husqvarna chainsaw. Best I've ever watched for tuning a saw.

@AmericanPiddler 4 года назад

Thanks for the kind words! Thanks for watching and Keep on Piddling #americanpiddler

@chrisweigand1817 8 месяцев назад

THANK YOU! I just got a brand new Husqvarna 435. It's my first gas chainsaw. I been borrowing my neighbors for years so I know how to run one but buy no means no haw to fi or tune one. My new saw will not stay on. It starts but the second I hit the trigger it dies. Because I got it on amazon from a third party seller its a nightmare to return and get a replacement. I am looking at it as a blessing in disguise. the tools are on the way and thanks to you and this video I will know how to tune my saw. mi have watched a dozen of these videos and yours is hands down the clearest to follow for a new saw owner. THANK YOU

@wayneboggs5840 5 лет назад

U are great I had 3 weedeators junked I watch one of your veidos an fixed all of them

@AmericanPiddler 5 лет назад

This is what it is all about!

@joncapp3226 5 лет назад

Great detailed info. Thanks !

@AmericanPiddler 4 года назад

Thanks for watching & keep on piddling #americanpiddler

@gregorybassetti-ve2cq Год назад

What a great video buddy. Outstanding job. My husqvarna has been choking out a bit and this really helped me understand how to methodically tune instead of just turning screws what feels like completely random

@dentondunn4346 2 года назад

This is the best video I've watched on tuning. Thanks for sharing

@upperechelon3456 3 года назад

Great video. For my turning tools I simply put a white dot [Office whiteout] on the shaft of the tool. Makes the job a little easier in gauging turns.

@AmericanPiddler 3 года назад

Jason that's a great life hack! Thanks for sharing & watching don't forget to subscribe and keep on piddling! #americanpiddler

@JamesCouch777 5 лет назад

Great tuning video. The three things I've found that make it impossible to tune a saw is stopped up fuel filter or air filter and blown or hardened diaphragm.

@AmericanPiddler 4 года назад

Great info James! Thanks for sharing! Thanks for watching & keep on piddling #americanpiddler

@Soeborg88 4 года назад

Great video! Straight to the point. Just bought a new saw that sounded rough, this was just the video I needed.

@AmericanPiddler 4 года назад

That's great news, hope you subscribed! Thanks for watching and Keep on Piddling #americanpiddler

@nate9135 3 года назад

Just bought my first 455, so this helped lots and thank you for tool link i will be ordering my set monday, thanks again

@AmericanPiddler 3 года назад

Thanks for watching don't forget to subscribe and Keep on Piddling! #americanpiddler

@lxmzhg 5 лет назад

THIS IS WHAT I WAS LOOKING FOR !!!! How to bypass going to the dealer !!!!

@AmericanPiddler 5 лет назад

Yes sir that's exactly why I made this video! So glad it helped you!

@kevinnicolay5331 4 года назад

lxmzhg I agree with you on by passing the dealer. Or a mower shop. Where I live, I took a weed eater in to have tuned up. It sat at the mower shop for over a month. I got fed up with waiting longer than a reasonable amount a time.Long story short it hadnt been touched. Matter of fact they couldnt find the weedeater . Then the owner goes Im just going to have to work on those machines from the small town I live near. I was pretty irratated at his response for just about losing the weed eater. So when I can bypass those types of shops,the better

@CCOOP-dm6id 4 года назад

Did this is the best video and I've watched a lot of how to videos this is by far the most informative and you didn't talk to me like you were my freaking dad scolding me perfect you should be a teacher!!

@AmericanPiddler 4 года назад

Hands down nicest comment I've had on RU-vid! Showing folks how to actually do things is the point of American Piddler! Thanks for stopping by and the kind words! Keep on Piddling #americanpiddler

@davidmathis7780 4 года назад

Thanks so much, this got my Husqvarna 359 up and running! Needed new spark plug and air filter, then just had to adjust the isle screw to fix mine. Purrs like a kitten now.

@AmericanPiddler 4 года назад

That's great news! Thanks for watching and Keep on Piddling #americanpiddler

@chappy726 5 лет назад

Finally someone shows what "Four stroking" sounds like. Thanks

@vahidgogic5455 4 года назад

Fair play. Well explained for anybody starting off and trying to run their saw and make some chips! 😎😎😎

@AmericanPiddler 4 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@clydeohara1052 5 лет назад

That is cool, I have well over 200 Planes half are still in kits. Been flying and designing planes since 5 year years old, now flying with Gasoline engines 30cc to 170cc engines. They go from 15cc to 420cc and bigger. Have been also tuning these and Nitro engine since then. Tuning them all are the same as the chainsaw of course. Your doing a good job showing this for people who either want to learn and some who cannot afford a mechanic, it is great man keep it up.

@AmericanPiddler 5 лет назад

That is awesome. That is quite the collection!

@josephreinhart8712 3 года назад

So my 266XL Husky, cira 1992, was running a bit...poorly. Like it had a virus. I watched this crazy guy adjust the jets on his Husky. Went out side and did the same thing, same Order of Operations. Woah! My old Husky is breathing The Fire of LIFE! Damn that worked good. Dude! You be the MAN!

@AmericanPiddler 3 года назад

Happy to have helped!! Thanks for watching and keep on piddling! #americanpiddler

@robertgutheridge9672 5 лет назад

I've got a stihl O45 AVE that is over 40 year old was my dads now mine cut a minimum of 15 cords of wood ever year. And because its been taken care of its still running strong.

@AmericanPiddler 4 года назад

Maintenance changes everything! Thanks for watching & keep on piddling #americanpiddler

@rossjonnes1582 5 лет назад

It's really important to know for a beginner how to tune a chainsaw properly

@AmericanPiddler 4 года назад

Thanks for watching & keep on piddling #americanpiddler

@2eyedjack433 3 года назад

Thanks for the vid, it really helped me understand. For whatever reason I kept thinking when you turned 1 you had to turn the other. Now it's a lot more clear. I'll go give it a try.

@kevinblair191 2 года назад

Appreciate it man! Video I needed. Simple and to the point. Tryin to get my Poulan Pro back up and running. New carb is wanting to be a pain! This was very helpful.

@bunny65x 5 лет назад

best video have watched in awhile. know what you are doing and showed us how to do it . I have one question though. Followed your link for the adjusting tools and they are saying that walbro carbs might require a 22 splined tool. will the 21 work? haven;t found a 22 on amazon. thanks

@AmericanPiddler 5 лет назад

I am not sure... I bought the two that I share links to and the one works for my Stihl and the other for my Husqvarna thanks for watching and Keep on Piddling!

@altondavis4493 5 лет назад

I want to replace the carb on my chainsaw with a slight different configuration type. What advice can you give me for that experiment? I don't have much invested in the saws ( just new fuel lines and diaphrams for the carbs). They were given to me so I'm trying to build one saw from three part saws.

@AmericanPiddler 5 лет назад

Honestly don't have much advice.... make sure you don't get it too lean is the biggest thing

@flipnotrab 4 года назад

That’s a “dangerous” game to play with two-strokes. Even SOME “knock-off” cheap ones are known to “wiggle” themselves out of adjustment and you’ll pop a piston or seize the motor. Yeah, I learned the hard way.

@rooker56 5 лет назад

Hello from Athens, Greece. Many thanks for sharing your experience with us!

@AmericanPiddler 5 лет назад

So cool thanks for commenting and watching! Keep on Piddling!

@jdwilliams5244 4 года назад

Very detailed instructions. Thank you for taking the time to help us out.

@AmericanPiddler 4 года назад

This is why we do what we do! Thanks for watching and Keep on Piddling #americanpiddler

@seashelly850 4 года назад

Thank you for this video. My old Craftsman chainsaw never ran very well, and after replacing the fuel lines a plastic part on the carburetor broke and I had to replace the carburetor. After watching your video I was able to tune the new carb, and now the saw runs better than it ever has.

@AmericanPiddler 4 года назад

This is exactly why we do what we do! Thanks for watching and Keep on Piddling #americanpiddler

@nickthedick3742 5 лет назад

One thing to consider if you tune for high performance in the summer your engine will lean out and run hotter in winter. I know it seems counterintuitive but what we're adjusting is the air/fuel mixture. Could air is denser than warm are and it will run leaner with denser cold air. I learned this lesson the hard way when I melted the glow plug in a nitro r/c car. Chainsaw may be more forgiving since it has forced air cooling but it's something to keep in mind. The climate makes a difference and I've heard some saws have summer/winter switch so you can have two set tunes for the seasons. I keep mine tuned for cold and it sometimes floods out in summer but I keep it on the safe side since I use it mostly in winter.

@AmericanPiddler 5 лет назад

Nick man thank you for that advice! Lots of folks need to understand what yo uh posted and you did a great job of explaining it! Thanks again God bless you and keep on piddling!

@nickthedick3742 5 лет назад

Thanks man I need to start a channel I've got a bunch of junk to piddle on here and I'm a maintenance man by trade. You're doing a fine job though I've seen a few of your vids. Piddle on my friend!

@eddieengland9886 2 года назад

Thank you for a very clear instructional video. I'll be using this video to tune my Husky 350 back to where it used be. 👍🏻

@AmericanPiddler 2 года назад

Thanks for watching don't forget to subscribe and Keep on Piddling! #americanpiddler

@clarencesalyers6077 4 года назад

You are a great person to be do in these video 's! I really appreciate your time. Thank you, Clarence Salyers

@AmericanPiddler 4 года назад

Thanks for watching & keep on piddling #americanpiddler

@jasonsmither7514 5 лет назад

The most in depth & understandable video I've watched to date on tuning my Husky! Gr8 job Brotherman! Just gained another subscriber 👍

@AmericanPiddler 5 лет назад

Super stoked that you found it! Thanks for watching and don't forget to subscribe!

@Ezandmeg03 5 лет назад

#truth very good video!

@jamesdyck9872 4 года назад

I subscribed also and just order the kit .

@AmericanPiddler 4 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@AmericanPiddler 4 года назад

@@jamesdyck9872 Thanks for the support hope ya subscribed!

@JayDee-bz2ge 4 года назад

I'm finna go adjust my sal right now!

@AmericanPiddler 4 года назад

Best comment this year! Thanks for watching and Keep on Piddling #americanpiddler

@richardtheisen6456 2 года назад

None of the other videos talk about the tool. They all say "it's hard to keep a screw driver on the adjustment screws. And it is. I ordered the tool, can't wait to try it.

@davidpallin772 3 года назад

Running saws most of my adult life, keep them clean, chains sharp, and generally take care of them. Never knew how to adjust high, low and idle speeds, was always afraid to try, having said that, I now have an vague idea. I will watch this clip repeatedly until I get it and fully understand what you are saying. Thanks, David Pallin, from Northeastern Minnesota.

@AmericanPiddler 3 года назад

Feel free to reach out & ask questions we're here to help! Thanks for watching don't forget to subscribe and Keep on Piddling! #americanpiddler

@koltonkinlicheene2297 4 года назад

"To lean where its gonna blow itself apart" 💀 damn now I dont wanna even wanna try it. For the saws life and mine 😂

@AmericanPiddler 4 года назад

Understandably so! My saws still running strong just have to be careful! Thanks for watching and Keep on Piddling #americanpiddler

@lbracknell 2 года назад

This is a good primer for adjusting the fuel/air mixture and idle speed on an otherwise healthy 2-stroke engine. If you don't get the response described, there could be other issues that need to be addressed; fuel/oil mixture, spark plug/ignition system, dirty carb/ air filter, or damaged cylinder, piston and/or rings.

@bobellingson8413 9 месяцев назад

you are adjusting idle speed counter clock wise and saying you are backing it off?

@frankmiles5389 3 года назад

Great information. In depth and easy to follow.

@buddyboy4x44 4 года назад

Most helpful re adjusting I have seen. Many thanks.

@AmericanPiddler 4 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@timothyshufelt4389 5 лет назад

I still use my homelite EZ for everything the old saw pain in the ass to work on and a pitch to find parts for but it's a powerhouse of a saw

@AmericanPiddler 4 года назад

Thanks for watching & keep on piddling #americanpiddler

@petermississauga598 4 года назад

Thank you for the GREAT video and educating me!!! Being an older guy who loves camping I found it easier, less stress and with less energy to use a bow saw rather than to start my chain saw... My question is, How does the saw lose it's factory settings? Also, what's the "rule of thumb" for mixing oil to fuel?

@AmericanPiddler 4 года назад

Um... there's a lot here so as the saw ages/breaks in and is in different environments weather etc. The setting could & probably should be fiddled with a little... as far as oil mixtures go for the cheaper Chinese saws I run 25:1 I also recommend a higher dollar oil not some cheap crap... on every other saw a 40:1 or 50:1 depending on the saw works well... we run red armor oil it's an echo brand and is great! Oil and maintenance is a whole lot cheaper than replacing parts or an entire saw! Thanks for watching and Keep on Piddling #americanpiddler

@markluxton3402 3 года назад

That is what I do to tune my collection of Homelite XL-12's, and all other 2 cycle saws and equipment. Good description.

@AmericanPiddler 3 года назад

Thanks for watching and Keep on Piddling #americanpiddler

@janebobb8559 Год назад

🤔 After watching numerous vids on adjusting 2 stroke carbs, yours for some reason seemed much easier to follow. Ty for the share. 😀

@robbieroche6779 5 лет назад

good job very helpful with my husky 435 great saws dont worry im subscribed because u dont beat round the bush you cut right to the chase no pun intended lol

@AmericanPiddler 5 лет назад

Thanks for the kind words and support! Thanks for watching and I look forward to hearing from you in future episodes!

@robbieroche6779 5 лет назад

I DESIGNED A GREAT PIC FOR U WER DO I SEND IT ?

@AmericanPiddler 5 лет назад

Send it to Instagram and Facebook

@richardbenson2566 5 лет назад

robbie roche op

@knightrides7 4 года назад

Thanks man! Got my Husqvarna 435 x-torq purring like a kitten!

@AmericanPiddler 4 года назад

Atta boy! That's what it's all about! Thanks for watching and Keep on Piddling #americanpiddler

@bobbygauldin7507 3 года назад

dug nite thanks works great

@josephwilliamson6878 3 года назад

That's what I'm hoping to do with my 435 x-torq e-series. Out if the box it seems to take forever to warm up and boggy. Also shuts off when idle for more than 20-30 seconds

@Another_Guitarist 4 года назад

Excellent. Thank you. We spend good money on these tools and taking care of them is not only wise, but fun and personally rewarding. I live on a mountain and have only 1 pain in the ____ to start chainsaw, a Stihl MS 311. Your video may help!

@AmericanPiddler 4 года назад

Thanks for watching & keep on piddling #americanpiddler