How to Add New Component Library in Proteus 8 | Direct Method 

Thank millions! This video help alot . I always see that website I don't know how to use ..Now I knew it ...

In my "PROTEUS 8 ", library, " IMPORT PARTS " is not available. Instead of it " import BSDL" is available. Please advice me.

Hello Sir, I added PIC24FJ64GC006 library successfully in proteus 8.9. But the problem is" when I double click on microcontroller and I trying to upload a hex file in this controller then it is not showing browse section, So how we can upload the hex file in imported microcontroller part no ? thanks in Advance !!

hello Sir, today i am trying to add STM32F446RE lib into proteus 8.9 SP0, i downloaded the lib from search engine and add into proteus accoding to you instructions, but after added successfully , the STM32f446re are not showing in components list. can you check , is stm32f446re proteus model are available or not ? thanks in advance

Thanks !! ı have been searching this for last 3 hours and finally ı found your video. Thanks a lot !!

I have a problem after import my part.. it can't simulate the part.. the massage is "No model Specified"

Hi. I do not have "the import parts" menu on my Proteus. Please help

دمت گرم داداش چنتا روشو امتحان کردم هیچ کودوم جواب نداد روش تو عالی بود دمت گرم. THANK U BRO THIS IS VERY HELPFUL.

"Error - Sorry but this service is no longer available in your region". I got this error when I tried downloading the part I wanted. Any ideas how to fix?

Sir in my software import part option is not available inside library . What to do ?

Hello sir .. how i can add library to proteus for SCA60 Angle Sensor?? Pls reply this is important for my project University

The reason we want to add new component libraries is to be able to simulate with the new component, but the PIC microcontrollers downloaded on the web provided here you cannot add a hex file because the options are not shown in the edit component as a normal proteus component which makes it useless.

How do I add Arduino nano to the Proteus? I can't find it in the website that you gave. If there are any other websites, please give the URLs. I would be grateful and if i can add by those copy paste methods, where do i paste the files? Since the Library folder isn't there? Please reply. I would be granted

i have follow your steps but still unable to add component in the library ,because extension that you have mentioned that is .pdif is not showing during import process ,in my proteus it is showing .zip file . plz help , me what should i do to import component

Good video to teach download and add a component. As to a microprocessor not included in Proteus original library, can we download the symbol and modify some files that we can use the microprocessor to simulate?

Hi, i added new component( HCPL-0631) at library but i could not simulated in proteus 8.9.Can you help to me ? i have that errors "--No model specified for U6. [U6] Simulation FAILED due to partition analysis error(s).--"

Can i use this library in proteus 7.1

did you check PIC18F67K40 lib for proteus 8.9 ???

Hello Sir, before 3 days ago, you promised to me you sort out my problem ( add PIC18F67K40 lib into Proteus 8.9) But I waiting you reply.. Please Sir if you can to add PIC18F67K40, please guide me because this is my project, and I stuck. Because my hardware also not working. So my Management is asked to me to use proteus.but in proteus 8.9 PIC18F67K40 not available.

After I followed your procedure I couldn't simulate with the component after I added it to my library so what do I do

Thank you so much i needed this . it's really worked out .

sir i am new in electronics .. My proteus version is 8.6SP2.... in this software in library import part option not there...import BSDL option is there only''''

Sir how to get 433MHz RF transmitter and Receiver Module in Proteus, HT12E and HT12D ICs

Hello sir i am trying to add mpx53dp but it can't add plz advice me to solve the problem.

I followed your steps but nothing showed up back to select file and nothing else

The component does not have simulation model, what can one do

My problem is soved . Thanks alot. Keep it up

The component can easily be added onto proteus but simulating it is another story, by merely adding it it will display "NO MODEL SPECIFIED FOR U5:...this error can be cleared by attaching hierachy module. The drawback is-----if you attach any component hierach module....it will not simulate. How can i solve that?

Firstly thanks. I added a atmel microcontroller-cortex m0 in Proteus library. But I can't add hex file to ic in edit component options. In edit component there is no option to show to add hex file.

i have proteus 8.7 it doesnt work for me plz reply i want to add rf5110g nd sa606

Hi this is Mohamed Nilufar. first of all I'm thanking to you for this tutorial it is gives us very useful. and I had added as your followed instruction into the Proteus which I have request device and it is given an issue; when it is simulating mode as this message (No model specified for D1. [D1] and .MDF) this error is occurring not only for that; it is occur on all new devices. Therefor' kindly I have request you give a solution and I'll highly appreciate you and expecting kind your response soon. Thank you,

Hi sir how to add arm cortex m3 library to proteus simulator plz guide me Or any other platform available

Wonderful helpful tutorial. I managed to add my desired component by following this video

i did not find soil moisture sensor..please provide me link of the library of soil moisture sensor. please reply sir??

sir my proteus does not have the import option to library. what to do?

Excuse me Sir can you help me to get the normally closed solenoid valve component please ?

plz help me to add atmega8l-8pu code choise dosn,t open

There no option in my library "important component"...? Please help dear!

I dont have library file in my proteus file

amazing i got footprint of atmega328 pu thank u boss

Thanks a lot for a formative vid 💐

Translation results Hi friend, great video and very clear explanations, I followed your instructions to download the library of a "tlc45940" integrated and it was added to the list; it appears in the list of available components and I have applied it to my circuit. I use it to interface arduino for drive 16 leds. I then built the circuit on proteus 8,12 and then uploaded the arduino sketch. When I click on play command, a message "No model spicified for U2" appears where u2 is precisely the integrated tlc5940 and the simulation stops. can you help me to understand why?

From where can I download proteus

"No simulator model" this type of statement above the symbol i.e you don't use this component for simulation so please try to upgrade it

Thanks for making this tutorial I've added ADS506AKNZ IC by following your tutorial, and when I tried to simulate it, it is giving me an error "No Model Specified for U1". Can you please help me with this? I'm using proteus 8.10

how can i add missing component in proteus 8 .

Thankyou very helpful

How download solenoid valve library?

The add model UC2525 to proteus not working

NICE CONTENT ...

Big thanks for you!

U saved mylife

sir i am unable to find the library for PIR sensor please help sir

Sir I follow every step to download and install to proteus 8.9 Now I wanted to add the new Component PIC18F67K40-I/MR. After,I followed your next video " how to add a new component " video. But now that Component are not showing in search bar.even I check the hierarchy module. But again problem are same. Please help🙏. I shall be very thankful to you for this help🙏

Thanks!

thanks you so much sir.

thank you so much for the help

How you get import library option

i cannot import parts in my proteus

But in simulation there are a bug

thank you this is usefull

How to add fire switch in proteus

It's very simple, everyone knows that, but your component with - no simulation model!

2 pole contactor package...I am not getting in this site

Thanks!