How to adjust an apple peeler corer slicer

Подписаться 24 тыс.

Просмотров 13 тыс.

50% 1

Is your apple peeler/corer/slicer not peeling as well as it once did? Is it leaving peelings on your apple? There are some simple adjustments you can make on your apple peeler to make it work as good as new and be a joy to use.
In this video I will show you how to use the adjustments on your apple peeler to improve it's function. I will show you how to adjust the peeling blade, if it is leaving peeling or if it is peeling too deep. Your core slicing blade can also be adjusted for an even cut. It is also important to know how to place your apple properly on to the peeler. I will show you how to properly position your apple for optimal results. You will get greater satisfaction from using your apple peeler, as well as improved results, when it is properly adjusted.
You can always refer back to this video for trouble shooting tips over time.
You can purchase a Apple Peeler Corer Slicer here:
amzn.to/3uqELMr
Our video about dehydrating apples is here:
• Apple peeler, slicer, ...
Please give this video a THUMBS UP and SHARE it with your friends.
Please LIKE and SUBSCRIBE
Support from viewers like you is what keeps us going.
Thank you for your support.
This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission.
Equipment and software used in making this video:
Canon 90D DSLR: amzn.to/3E64SLH
GoPro HERO9 Black: amzn.to/2RXkbE1
Rode Wireless Go Microphone: amzn.to/3wSv34O
Neewer LED Video Light kit: amzn.to/3fLmAKV
Camtasia 2021 amzn.to/3pMGlFS
Adobe Creative Cloud: amzn.to/3IIPNT3
Adobe Photoshop: amzn.to/3IIPNT3
Please visit our website at:
diywithwayne.com
Visit us on Facebook:
/ diywithwayne
The focus of our RU-vid Channel is to help you save money by doing things yourself!
Please visit our new RU-vid Channel , "Bucket List Time with Ann and Wayne"
/ @bucketlisttime
Thank you for visiting and have a great day!
Wayne

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@haileycocke1193 Год назад

Wayne this was such a helpful video! My great grandpa had one of these that I loved during childhood and I finally got my own today. The corer bit was giving us trouble (still is but we’re getting there). This was a huge help, so thank you!

@DIYwithWayne Год назад

So glad I could help. Childhood memories are precious! Enjoy your apple peeler, thanks for visiting and have a great day!

@rivazza68 8 месяцев назад

Thank you sir

@DIYwithWayne 8 месяцев назад

You are very welcome and thank you for visiting, have a great day.

@buckonono7996 6 месяцев назад

I just bought the new Johnny Apple Peeler that has a suction cup base. When it works, it's fantastic. However, every so often it gets halfway through the apple and then it twists the core and stops slicing. This leaves me with an apple that is on both sides of the slicer and it has to all be pulled off and finished by hand. Before I start, I try to center the apple core on the device so that it spins evenly, then I push the apple all the way onto the prongs. I can't figure out why it works on some apples and not others. They are all Honeycrisp and I picked them up at the store last night. They are firm without bruises. I have about 20 lbs total and am only half way through. Do you have any idea of what is wrong? Thank you.

@DIYwithWayne 6 месяцев назад

This is unusual for a firm apple but the apples were likely picked 6 months ago. This could be the problem. Good luck with your project and have a great day.

@buckonono7996 6 месяцев назад

@@DIYwithWayne Thank you Wayne. The apple seems to stick between the blade and the peeler when it gets about 3/4 inch from the end. I just did another 5 lbs and only 2 apples went through properly.

@buckonono7996 6 месяцев назад

@@DIYwithWayne I found out what was causing the problem. The wingnut that holds on the coring/slicing blade was hitting the apple and causing it to stop turning. If I turn the apple around and run it through with the blossom end towards the fork, it almost never happens. Why the directions show to do it the opposite way, I can't figure. My old machine must have had a smaller wingnut. Just thought you might like the update as it might help someone else.

@DIYwithWayne 6 месяцев назад

Thank you for your suggestion.

@marvinclark4019 10 месяцев назад

Myy cutting blade needed to be adjusted and I took it off the arm only to realize O cannot get it back on. NOBODY TELLS HOW TO PUT A NEWBBLADE ON THE CUTTER ARM! WHY NOT!!!

@DIYwithWayne 10 месяцев назад

Good question, I hope my video helped. Thank you for visiting and have a great day.

@marvinclark4019 10 месяцев назад

Why don't YOU demonstrate how to replace the peeling cutter? You know....that little u-shaped cutter that cuts off the apple skin? It suddenly became too small to be put back on. I just ordered a whole new perling machine that comes with TWO extra peeling blades...WHAT A JOKE! It must take a machine at the factory to form it in place!

@maryjoboyle606 Год назад

Thank you for a great video! I've wanted one of these devides for quite a while and I was delighted to find a Pamper Chef one today at a thrift store for $5.. It is complete but there was no box or instructions. I have a home-based cottage food business and was only interested in using the peeler corer slicer for making pies, etc and I've never been interested in dehydrating anything, but I'm going to watch your video on that device and I just may start doing that, too because that would be another item I can sell.

@DIYwithWayne Год назад

That sounds great. They do work well if the blades are sharp and the apple are firm. Soft apples will be a big problem, even small bruises can be an aggravation. A tip: if dehydrating, take them out and put in sealed bags hot. If they cool off first, they will get soft. Good luck with your project and have a great day.

@MarcMedina-h8p Месяц назад

I watched several videos about adjusting this device and this video is the best!😊

@DIYwithWayne Месяц назад

Thank you for the kind comment and for visiting, have a great day.

@stevenp1909 Год назад

Great video from Canada

@DIYwithWayne Год назад

Thank you for the kind comment and for visiting, have a great day.

@bernadettestykel7504 11 месяцев назад

Hey Wayne. Do you have an idea on making the slices thicker?

@DIYwithWayne 10 месяцев назад

Not with this peeler. The thickness in controlled by the threads on the lead screw. Thank you for visiting and have a great day.

@francineb732 7 месяцев назад

Thank you! I was wasting a lot of apple before watching this.

@DIYwithWayne 7 месяцев назад

You are very welcome. I have used these for years and know how aggravating they are when not adjusted correctly. Thank you for visiting and have a great day.

@nospam4668 8 месяцев назад

Thank you! This helped fix my problem! It was the fine tuning of moving the blade forward

@DIYwithWayne 8 месяцев назад

I'm glad it helped. Thank you for visiting and have a great day.

@PERFECTLOVEwon 10 месяцев назад

Could u please help me fix the spring to my blade it's fell out and can't fix it please🙏💕

@DIYwithWayne 10 месяцев назад

I have not had that problem but the end with the horseshoe shaped end goes to the cutter arm and the other end goes' through a hole on the base. I hope this helps. Good luck with your project and have a great day.