We had Professional painters prep 300sq ft of concrete deck around our pool according to instructions including Muratic acid etching to a very clean surface, applied thin 1st Coat Granite Grip as base coat allowed 24 hrs to dry as we were applying product in Texas and morning shade was best for application. Following manufacturer's warning not to apply in direct sunlight or above 90 degrees. Second coat of Granite grip applied as video instruction did not cover, leaving unavoidable roller marks. Five different painters had a go at rolling, and after 24 hours determined the sand aggregate within the product was not homogenous and was not spreading evenly. 5 Gal covered 2 coats of 300 Sq ft. We bought 2 more gallons and applied the third coat with another 1/4 adhesive roller, still upon drying we have roller marks, hi-low aggregate, uneven areas visible. Another RU-vid DIY guy posted same experience and said absolutely need to spray the 3rd coat, probably spraying the 2nd coat would be advantageous as well. Our painter concluded it is the product, not the rolling technique, if you are having issues on a large area, switch to a sprayer, as this video suggests, but does not emphasize. We are happy overall as the product appears durable and bonded well. Good luck guys.
Can this be used on existing pool deck that currently has an orange peel type texture? Best way to prep this type texture? What does the final product texture looks like? Great video
So what happens if it rains the next day or out of nowhere that day ? I live in Florida and one second is 95 degrees sunny beautiful day and then the world its ending outside that even the weather guy gets surprised.
Great question. If the concrete isn't porous, we still recommend etching. To do a porosity test, sprinkle a few drops of water onto the floor. If it gets absorbed fairly quickly, you may skip etching since your concrete is already rough. We hope this helps.
I applied this material on a concrete patio and know the owner is telling me that the edges are peeling off. What do you recommend I do in that situation? I sanded the concrete, then I power wash just to be on the safe side but still peeling.
Hi Salvador, we're sorry to hear that the edges of the coating are peeling off. Please reach out to us directly so that we can help you with the best solution. Our Customer Care team is happy to help! Alternatively, you may chat during business hours here: spr.ly/60501cMCn.
Do you think I can "Hide" crack repair with this? When I patch up cracks with filler, the filler is never the same color and you can tell there was a crack there. Could this be put on top to "mask" and "hide" so that a new home buyer or home inspector can "NEVER" tell that there was a crack and repair?
Hi Anonymous, Thanks for writing in. The Granite Grip is a great product that does fill in hairline cracks up to 1/8". However, if the cracks are larger than that, you'll need to repair those with a paintable concrete filler before applying it. Also, it's very important that all label instructions for prep and application are followed to ensure a successful project. And keep in mind that while two coats are necessary, additional coats may be required to hide previous surface imperfections or cover over dark colors. Good luck!
@@BehrPaints Thank you for your response! One more question on the proper use of the acid to prep the floor. How do I get it off without washing it into my plants and killing my landscape or grass? Is there a special mop? Some people are saying to throw tons of baking soda at it before rinsing. Just thought I would check with you pros first.
Hi Joseph. Granite Grip coverage is 40-60 sq. ft. per gallon, and is offered in Premix Tan, Premix Gray, and 16 additional tinted colors. spr.ly/6052EeAmC
Awful product to work with. Didn’t spread nicely with roller, had to press so hard I broke the handle. Wouldn’t cover lower areas of concrete. A total disaster, I would not recommend this product!
Hello gaylecz. We are sorry to hear about your experience, and we would like to help. Click the below link to chat with a customer care rep for further assistance: spr.ly/6051Embbz (Mon - Fri, 6am-5pm PST and Sat, 7am-3:30pm PST)
Hello there! Our Granite Grip coating can be removed using a concrete floor grinder, it can also be topcoated with a solid concrete stain or concrete paint. If you have any other questions or need additional assistance, feel free to reach out to one of our Customer Care reps directly, via chat, here: spr.ly/60501r4d2. (Hours of availability can be located on the website link provided.)
This is some BS, its too much work and steps. The dude himself lost his breath saying all those steps that one has to do before the actual painting? Rediculous