HOW-TO APPLY EPOXY TO A FISHING ROD | Rod Building 101 

Thank you !

😂😂

Thx for the comment:) it’s uplifting:)

Nu ai pentru ce, doar asa vor merge lucrurile inainte... si cine stie de la cine mai invat si eu una alta.... unele din chestiile din clip le-am invatat de la mai putin rodbuilderi ca si mine... dar cu cate o ciupeala de ici de colo, cate un esec... a iesit ce se vede. Daca-l fac peste 2-3 ani acest clip s-ar putea sa mai completez cu ceva chestiuni :P

You're very welcome!

Glad to hear! Will keem more coming! Will try to make one for those that aren't able to use a power wrapper.

@@asavafishing excellent, that is exactly what I need.

It only took a day and a half :D... to make it/edit it :P. A no brainer :D... Kidding aside, I am always happy to share

Great tip!

Glad you enjoyed it

Thank you also!

Multumesc foarte mult! Ma straduiesc :)

de ce nu ai facut clipul si in limba romana?

My pleasure!

Will do… But be patient with me… it takes loads of time to do these :)

Wich is the diameter of your thread for wrapping the guides? Any brand you can advise? Thanks.

Will have some more coming soon

@@asavafishing will be looking forward to it!!

Thank YOU VERY much!

@@asavafishing you're welcome brother 🔥🔥

The gel like mix, is the same batch of epoxy… it starts as really fluid but after 20-40min it starts to gelify and harden. If it doesn’t sip through as is … and it starts to gelify… it needs some help from a lighter !

IT is because there’s where the thread goes up the foot of the guide …. If I would’ve done the inserts after the bump, where the surface is flat , the issue would not be there anymore !

I will try to Make a tut on that as well

That is an ALPS power wrap. I will have some available in maximum a month! If you need any.

You can try to use automotive spray can paints... they usually hold up pretty darn well!

the coating in 95% of cases will add nothing but some colour and weight to a blank, and nothing else.

sand it on a power wrapper with lots of 600grit paper, until it's somewhat straight. Then recoat it with a thinn layer. I don't know if you can do that without the power wrapper though!

@@asavafishing Thanks for the tip. I use the Flex Coat variable speed slip chuck device. Low budget. Maybe I'll get Thread Master Epoxy and put it over the sanded CRB ProKote. I've never had experienced a wavey finish before. The ProKote is 11 months old. Thanks Again for your response.

Difficult to say... what material are they made from?

ru-vid.com/group/PLQi9S0t5WyXOu2iXXtttmGC7KYC6N0ToK

Soon I will be adding some more

It's the same epoxy batch, but it starts to become like a gel when it starts to harden

That one is Fuji nylon chestnut

Not recommended!

With a 9rpm, it takes time and experimenting to get the hang of it… first you need a goood understanding of how the resin works at different stages ! It’s 2 much to put into words !

It’s the same exact principle !

@@asavafishing Maybe yes..., but I would like to see how the power wrapping works (and looks like) on the smallest top rings.

@@CustomFishing_EU May I suggest, use a fly wrapping bobbin. Allows you to keep a tight wrap without bending the tip

Fuji Torzite guides, KR system (KL20H, 10H, 6M, 5.5L, KB 5, 4x KT4.5)

What syringes are you using?

@@asavafishing used the mudhole ones I ordered

Same !

If you have big guides, you might not be able to do them all without some exercise, because it takes longer for each guide, and the resin might start to harden faster.

Usually MAX 24hours !

This was some very old Gutebrod!

Thanks for the reply I’m unfamiliar with that brand . I’m struggling to find something similar that darkens up when epoxy is applied

You need the same guide... you can warm the wrap up with a hair drier. Pull gently moving from side to side, then with 2part epoxy, you can actually glue in the new guide. Not as pretty, but it does the trick :P

@@asavafishing i have dbl foot guide. it doesn;t work i think...also is their a cheaper alt to epoxy? gorilla glue? thanks

Decal Connection - in the US... they do the best stuff!

Did you watch the video? He shows the bottles at 1:16 😂

Gen 4 ? ce anume?

@@asavafishing noua rășină de o laudă mai toată lumea pe afară (nu știu dacă în scop publicitar sau nu)

Da-mi si mie un link... pe unde m-am uitat eu, nu am vazut-o :).

@@asavafishing ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_qvAFWYop8g.html

Nu cred ca merita investiția de timp

Speed only helps me spread it, nothing more. If you apply it using a slow rpm motor instead of a power wrapper, you have to adjust technique. You need the speed in order for the resin not to start setting until you get to the last guide. If you do it straight on a drier, then it takes more time... and probably a different type of resin might work better. What kind of seringes did you use?

Este subtitrare in românește

I did , but this works the best for me!

adica ? dezvolta sa stim si noi despre ce este vorba ...

E simplu, cine știe înțelege... Și invers!!!

Nici eu nu întreg unde bati. Dacă la faptul ca tutoriatul este in engleză... și ca nu e subtitrat este pentru simplul fapt ca încerc sa ma adresez mai multor persoane decât 10-20 de persoane interesate din Romania. Și nu e subtitrat in romană , cel puțin nu încă.... pentru ca am lucrat deja 1 zi întreaga la acest clip și ar mai însemna încă cel puțin jumate de zi de care nu dispun, pentru a-l subtitra ... lucru care va conta efectiv pentru nici mai mult nici mai puțin de 10 maxim 20 de persoane din Romania. O gratuitate pe care nu mi-o permit in momentul de fata :)... dacă este cineva interesat sa subtitreze acest tutorial este mai mult decât binevenit, si ma voi inchina in fata lui :). ...

cred ca doar un abonat care a baut un pic mai mult si sa trezit invidia din el ... nu cred ca te stie ...sau este ceva serios ... sunt foarte multumit de tot ce faci sa ne ajuti pt a deveni din ce in ce mai buni pescari de spinning... felicitari pt tot ceea ce faci ...

Din pacate daca nu uitai sa mai treci si tu pe la scoala stiai si tu putina engleza si aveai si putin mai multa cultura cat sa nu faci afirmatii de genul!

This is what works for me! Everyone can take whatever they feel like from this video and apply to their own projects. Even if I learn 1 small thing from a video like this, for me it's not pointless, it means I have added more quality to whatever I do!

Always one critic out there

?