How to attach a walker headset on to a Hard Head Veteran's helmet hhv 

Well, I got those two items you showed to work. I lined them up and used a weighted mallet and gave it a good couple of whacks. It started going together, and I was able to push them together. I also added that Walker walkie talkie attachment from Amazon, so now I have comms with my Walkers 😊

Wow thank you so much. I have spent alot of money trying to find a way to mount my walkers to my hhv helmet. Just ordered the parts a minute ago. Appreciate what you have done here bud. Thanks!!

This is the best video showing how to do this, no bs, straight to the point AND you give the links to the products you used. Thanks a lot man!

Fantastic video. Thanks. I ve struggled with attaching ear pro to my hhv

Awesome video and very informative! Just a quick note, the MLOK adapters are actually supposed to go in the lower center opening of the rail. To do this you'll need to gain access to the back of the rails by unscrewing the three Philip head screws. Once you've done that, you'll be able to slide the T nut through the back of the rail and insert it through that middle opening. After that you can screw the rail back on and proceed with installing the rest of the items. The adapters and mounts are susceptible to sliding/slipping off the top larger opening so to avoid that we advise to install the adapters in the lower opening.

One thing I ran into is that sometimes the balls on the ends of the wires will make the plastic pieces that attach to the ear cups too large after you pull the wires out. If this happens, a short session with a heat gun will relax the plastic so that the ear cups won't fall off the wires.

Thanks a lot! The CGS adapter was the part i was looking for!

I've always wondered how these people get an E-muff attachment on the helmet. Thanks

So, the issue I’m having is the arms aren’t staying in the Walker brackets

I have both parts you show here, the adaptor you bolt to the HHV M-Lok rail, and the part from Amazon that goes to the headlhones. I guess I am not strong enough to slide those plastic parts together, I have even filed down the one a little bit that mounts to the helmet, then used a hammer to whack rhe peiecs to mate, no luck. I think I am going to go back to the HHV ear-pro one, at least I got it to work.

I just got mine attached to my hhv the adaptor I got from hhv is very hard to manipulate I want one like yours I'll have to get that

Are these walker razor slims ?

Will hard head veterans pop out 3m arc kit not work with the walkers ?

Could you do this with only the walker slims? Just basic ear muffs or do they have to be the electric ones?

The ear mounts came with different plastic pieces that you just slid off right? The link in your description brings me to a set with peltor attachments

Helpful video. Thank you.

Will this work on a pts m tek flux? It’s also m lok

This worked, thanks!! Wish I never bought the HHV helmet. Basket sucks so I bought a team wendy cam fit. Team wendy was still cheaper than HHV micro lattice crap. HHV has been the biggest pain in the ass due to the m-lok rails so everything needs an adapter and stick out to far. The shroud is junk also, had to replace because my Wilcox G24 was so loose it rattled. Basically had to replace everything except the shell and even that crap is made in China and probably won't stop a 22lr. If you're thinking about a HHV helmet just don't do it.

im using the kit from HHV to mount mine, i figure they sell both it should work

Thank you!

HHV! 🤙🏼🇺🇸

Ah yes. The Chinese helmet made for US veterans who can’t read and don’t want ballistic protection.

You won't be able to communicate with these ear protections...

Step one: don't buy an HHV helmet.

Quick note, this does have the ability to swing around if you want the ear pro to swing more towards the front and back.

Are these walker slims or patriot series?

It can swivel front and back?

bet thx man . i was scared to break em but you said just pull it out so i did . and i came right out like you said

HHVs attachment is lower profile.

i like slappin folks...

Outstanding. Thanks man.

Has anyone ever tried to fit those on a Mitch 2000 ?

Thanks, This was helpful

hey boss, how do i go about finding the NSN for these helmets ? thanks in advance!!

Has anyone ever told you that you sound like Channing Tatum?

Does this work with any walker headset or just that specific one

Will it work with the HHV rail adapters?

You didn’t have a lot of money and bought garbage that wouldn’t stop a fart on a calm day. Should’ve bought a bicycle helmet, for more protection