Your a God send lol I been using my left hand to turn the wheel an this makes so much more sense to use my right hand an then left foot for speed because it will he easier to keep a steady pace, I just applied to join that Facebook group I hope it's still active thank you so much
thank you for making these videos! appreciate you. if you ever make a video showing how to stop, unhook, and start somewhere else on pattern, i would love that. i can’t find it anywhere and i feel like people who have done this a while have the shortcuts!
I understand completely, it takes awhile to get the hang of it, I will do one soon, but until I do, here are some steps. 1st you need to reach down and pull a long bit of the yarn through the tensioner. that gives you slack, as you know you pull on the stitches they will undo, so then you need to get your knife and slip it through the yarn between the needle hook and the material, and start working it to get that yarn up on top instead of underneath. Then once it is long then I break it in half, as I want to stitch that thread on the underside to knot the stitches. the piece that is still connected to your spool of yarn I tend to grab it and pull until I have a nice long tail, then I remove the fabric and grab that yarn under the fabric. That way you do not lose that yarn back down under. Once you get the hang of how hard to pull with the knife without breaking the yarn it will get easy. If it breaks don't panic, you just won't be able to knot off those stitches, if it is a patch, you can buy fabric glue and glue the whole backside which will stop the thread from unraveling. Make sure you don't move the balance wheel towards you, I have found that the looper will let go of the yarn, and you will have to rethread as it will stop picking up the yarn. I have that bad habit as I sew a lot. It looks like the yarn is in the looper but it isn't really. So you have to start over by pulling with the threader the thread back up.. Hope this helps.
to stop you can do few sings 1 Make a small round ball, then release thread from the bottom and carefully pull not to brake the hook on the needle it is bette if you follow the tongue (it is a part that moves the foot) it has to be away from you
Saya tak hina sesiapa sebab sesiapa yang ada keinginan mendalami bidang ini cuba buat yang terbaik okey bagi saya tak ada halangan teruskan okey terbaik sekali 😢😮😮😮😅😅😅😊😊😊😊😊😊
Super👍👍👍👍👍👏👏👏👏👏у меня машинка cornely не вышиваеть можете мне помоч или указать какую выдео каторие починяють машинку машинка ходит не сдеоаеть петля на материал.Спосибо за ранее. 💐💐💐💐🌹🌹🌹🌹🌹🌹
The only yarn I use is this supplier. I have all his yarn and Rayon thread. He developed this special yarn specially for these machines. www.ebay.com/itm/Tex-15-Thread-Perfect-for-Singer-114w103-Cornely-Machine-FLAT-SHIPPING-RATE-34-/323359961933?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
I'm sorry your message translation must not be clear enough for me to understand what you're asking. If you're anywhere close to India I do have a contact there that can fix your machine. Here is his eBay listing of a machine and you can contact him through there www.ebay.com/itm/223166843138?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=7V72EJZsTjC&sssrc=2349624&ssuid=lf2RFr0pTfG&var=&widget_ver=artemis&media=COPY
I purchased both my machines from a seller who is an expert at rebuilding them. His family owned a large factory and he is rebuilding them and selling them. These machines are not cheap. Then you have to get a base a motor and table top. He only sells the head. Here's his latest machine that's ready for sale. www.ebay.com/itm/Singer-114w103-Chain-Stitch-Embroidery-Machine-Restored-Free-Shipping-/223166843138?_trksid=p2349624.m46890.l49292
It will but it will be on the bottom of the material. However you can't use the yarns in your machine. I have a Singer Creative 1030 that has a bobbin insert so it will chain stitch. I have played with it. Perhaps I will do a video on how it would work. But to do what this machine does you must have this style machine. Sorry to say. If you want me to do a video tell me and subscribe so when I do it you will be notified. It was meant to be a easy removable stitch like for basting. Pull the thread and it comes out of the fabric
@@abdulla4280 The machine is complex. My machines which I have 2 cost me complete with motor and table about 3,000 each. Mine are completely refurbished and run like new they were manufactured in the 1920 to 1940's. The manufacturer where I purchased has a machine on Ebay. That is not including the table or motor about 3,500.00. I've had mine about 3 years and prices are going up. There are other models not Singer not as precise working models from China. You can find on Amazon. The only others that I would think of purchase are Consew brand. Where are you located? Look on Alibabba. But if you can afford it then here is a link for the best, where I bought my 2 machines. www.ebay.com/itm/223166843138
Computerized sewing machines have amazing features, I do have the capability on my Brother Quattro 3 for chain stitch. However nothing is like true hand guided artistry of these machines.
I purchased my two machines from : www.ebay.com/itm/Singer-114w103-Chain-Stitch-Embroidery-Machine-Restored-Free-Shipping-/223166843138?_trksid=p2349624.m46890.l49292
Thank you for your kind words! I hope you got to see all the videos, there are 3 of them, I do tend to talk a lot! Ha ha. Anyway, the files are on our group page on Facebook. Here is a link so you can join, and look in the files. One of our members spent the time to type the bad pages which is so great of her. Took her a couple months. And there is a member that also gave us copies of practice sheets too. facebook.com/groups/126133941252654/ Look forward to seeing you on our page!
Oh wow that's awesome! Just requested to join. Can't wait to print them off. I was literally just talking to my husband about how much I dreamt there were letters already written out that I could just practice using. It's like a dream come true! Thank you again for sharing.
Do you happen to know where I can get one? I am located in oregon and I've been looking for resources tirelessly and havent found a thing. I really want to get my hands on one. Any info would be lovely and much appreciated.
This yarn was developed for these machines, I use only this, I have bought every color. It is worth the money. He also runs a FaceBook group and sells refurbished machines in which I own two of them. He is the Best!! Gabriel is his name: www.ebay.com/itm/Tex-15-Thread-Perfect-for-Singer-114w103-Cornely-Machine-FLAT-SHIPPING-RATE-34/323359961933?hash=item4b49c1734d:m:mSudyp2ei5TyE522WSVjTAQ
Apa yang saya cakap semua duit saya masuk dekati accaount bank bukan saya boleh ambil orang lain yang control duit itu ssya buat kerja ni sia sia sahaja 😢😮😮😅😅😊😊😊😊😅😅😊😊😊😊
I'm not really sure what you were trying to comment. The translation from Google was hard to understand. As they say Lost in translation. This video was done as an introduction to how to begin learning the machine. I'm sorry if it didn't meet your expectations. I'm not a professional this was strictly done as a favor.
