Тёмный

How to build a 4 Link suspension, DIY triangulated four link build, Jeep Wrangler TJ 

Подписаться
Просмотров 337 тыс.
% 5 206

In this video i setup a Upper triangulated four link kit on the 1997 Jeep Wrangler TJ. I used the Barnes 4WD 4 link kit for this long arm suspension build. I did use an Upgraded Heim Joint, the JMX heims. It was about $65 extra.
Check out our website: muddybeards4x4.wixsite.com/mysite-1
Amazon Store: www.amazon.com/shop/muddybeards4x4
Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout
www.barnes4wd.com/?ApplyPromo=muddybeards
Get 10% off your Yes Welder purchase and using coupon code “muddybeards”
yeswelder.com/?ref=dVU5yUQ6
Yankum Ropes: yankum.com?afmc=1v
Get 10% off Olight Products, with coupon code “muddybeards44” www.olightstore.com/s/8A018Z
Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
www.setpowerusa.com/discount/Muddy%2520Beards%25204X4
Tools I Use, MotivXTools: www.motivxtools.com/
10% off coupon code: muddy
www.setpowerusa.com/discount/Muddy%2520Beards%25204X4
DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Авто/Мото

Опубликовано:

 

6 фев 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 227   
@thelonewrangler1008
@thelonewrangler1008 21 день назад
I've come back to watch this vid multiple times, and it's still one of the best vids for explaining geometry in a simple yet thorough way
@MuddyBeards4X4
@MuddyBeards4X4 20 дней назад
Thanks👊🏻
@jakewesterfeld5960
@jakewesterfeld5960 3 года назад
If only every DIY video were this concise, yet thorough. I really appreciate how much trouble you went through to explain everything (including the specs for distance and angle) and light every shot. THIS video is what RU-vid University is all about. Bless you, Kelly
@MuddyBeards4X4
@MuddyBeards4X4 3 года назад
Thanks man I really appreciate that👍🏻
@carlosrendo4970
@carlosrendo4970 Год назад
Best 4-link explanation I've seen, hands down! Thanks for demystifying proper locations, degrees, parts, and all that good stuff.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 👊🏻
@jkgkjgkijk
@jkgkjgkijk Год назад
I heard 'plug weld' --smart man. You should be proud of yourself.
@duneattack
@duneattack 2 года назад
Even after all this time I still come back and refer to this video. Thanks brother for a great DIY Lesson!!!!
@MuddyBeards4X4
@MuddyBeards4X4 2 года назад
Awesome 🤟🏻
@driller840
@driller840 2 года назад
THE BEST VIDEO ON THE SUBJECT ! VERY DETAILED, i WISHED TO LIVE CLOSE BY YOUR PLACE.
@station08
@station08 2 года назад
HE'S NOT LYING ABOUT THOSE TJ FRAMES !!
@brandonensing7444
@brandonensing7444 4 года назад
I just got my rear 4 link done on my xj and love the way it rides now!
@davidw7080
@davidw7080 3 года назад
what did you do for springs? coil overs or did you weld in spring perches?
@zip7806
@zip7806 2 года назад
Thanks for the Numbers Game. Now we can get to Welding.
@leonardovillalba881
@leonardovillalba881 2 года назад
Awesome job. Very clean !
@stevezickefoose8563
@stevezickefoose8563 4 года назад
Excellent presentation, one of the best 4 link DIY on RU-vid.
@rickmarquart3277
@rickmarquart3277 4 года назад
Great video, Kelly! Can't wait to see it work. Thanks for all the information
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Me too👊🏻 lol
@PBROWDER111
@PBROWDER111 3 года назад
This is the best explanation video on 4 links I've seen. Thanks
@MuddyBeards4X4
@MuddyBeards4X4 3 года назад
Thanks I appreciate it🤟🏻
@cb.offroad
@cb.offroad 4 года назад
We dig the content Kelly, you guys keep it up!
@bdjm8595
@bdjm8595 11 месяцев назад
Lots of great info here, thanks for putting this vid together!!!
@evanlunney3347
@evanlunney3347 4 года назад
Great video! I’ll be saving it for later!
@IanJesting
@IanJesting 3 года назад
Nice video! This actually gave me some confidence that one day I could 4 link swap my montero sport. Just gotta learn to weld now..
@wheelhouseadventures8176
@wheelhouseadventures8176 2 года назад
Thanks
@tacotimetyler1626
@tacotimetyler1626 4 года назад
Looking great Kelly!
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Thanks👊🏻
@user-jo8ds2sh1i
@user-jo8ds2sh1i Год назад
Great job
@trashbarn
@trashbarn 4 года назад
Dude! This was a great video. Helpful info and quality how to with what you showed. totally something I can do now that I have watched this. Thank you!
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Thanks, good luck with the build.
@elij.s.7580
@elij.s.7580 3 года назад
So much good info, Im glad I clicked on this video. My situation is a bit different. I have a lowered 2wd street truck that I want to get completely rid of the leaf springs and convert it to coilovers. The geometry is so important and I haven't been able to find a good video on that anywhere.
@markfrancies8356
@markfrancies8356 3 года назад
Go to RideTech on RU-vid
@rowlinstoned3715
@rowlinstoned3715 Год назад
Awesome man! Explained very nicely 👌.
@tylersabikerful
@tylersabikerful 4 года назад
Awesome video going in depth on four linking the rear. 👊🏻
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Thanks👍🏻
@justinschlaud9443
@justinschlaud9443 4 года назад
This is the step by step, how too, with tips and tricks I have been looking for!!!! Amazing video, great job!! now it’s time to spend some money!!! Thanks again!
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Thanks, lol. Yes, lots of money🤟🏻
@teoteagueosborne
@teoteagueosborne 4 года назад
Awesome. This has been on my mind lately. I hope to get it done this year
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Nice 👍🏻
@jasonsilverberg8327
@jasonsilverberg8327 4 года назад
Great vid. Very helpful
@nandsinghrajput7653
@nandsinghrajput7653 3 года назад
thanks for sharing this amazing video. God bless you n your family .
@leoseven7336
@leoseven7336 3 года назад
Good job..next proj..thanks for this video
@nemesilva1
@nemesilva1 4 года назад
Excelente video!! Se aprende mucho! 👏👏
@pumaoverland122
@pumaoverland122 2 года назад
Great job! Greetings from Brazil!
@abrahaocampelo6139
@abrahaocampelo6139 4 года назад
🇧🇷 O melhor do mundo 👍🏻
@bsideadventures2180
@bsideadventures2180 4 года назад
Great video.
@rareearthfab5511
@rareearthfab5511 4 года назад
Nice setup!
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Thanks👊🏻
@starbattles1
@starbattles1 3 года назад
Thanks, well done. Very useful. I'll be doing this to my 73 mustang in the near future. Doesn't look too complicated.
@MuddyBeards4X4
@MuddyBeards4X4 3 года назад
Nice man, good luck
@aaronthompson9771
@aaronthompson9771 4 года назад
This video is going to help my son a lot on his TJ build, thanks! (I like the leafs on the back of my XJ, they’ll be staying😂)
@harrison_9327
@harrison_9327 4 года назад
great video
@patsaunders6035
@patsaunders6035 4 года назад
Great video man!!! Loved it!!
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Thanks man, appreciate it🤟🏻
@Cinirace
@Cinirace 3 года назад
I have the same welder works great🤟🏼💯
@ChevyLife-qs3ti
@ChevyLife-qs3ti 3 года назад
Great video. My son just bought toyota axles for his 91 trooper project and he wants to link them under it. He is 10 years old with wheeling passion.
@TheBeardedJeeper
@TheBeardedJeeper 4 года назад
Really great tips. I’m gonna have to learn how to do this
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Barnes 4WD makes a 3 link kit for the JK, Get on it!
@PaulKaiser42
@PaulKaiser42 4 года назад
Awesome video!!! I would not have the patience for 4linking...lol!!!!
@dolarmangr
@dolarmangr 4 года назад
Very nice and good job 👍
@serjkeshish8093
@serjkeshish8093 4 года назад
Wow amazing man grate job kip it up .. awesome
@elyeli6250
@elyeli6250 3 года назад
I'm gonna do this on my Minitruck
@johnh8615
@johnh8615 Год назад
Pro tip for welding .. I’ve welded brackets near my whole life on boats. And you don’t have room. Practice using a mirror and for welding use a bent low hydrogen rod (for strength). In a restricted position this will work.
@tslucam
@tslucam 2 года назад
Just found this video. Great detail. Very much appreciated. Thank you!!! Like, subscribed, etc.
@kundrew1990
@kundrew1990 3 месяца назад
amazing thx
@qaz261
@qaz261 4 года назад
Good informations. Спасибо. Хорошее видео. Хоть язык плохо понимаю, но наглядно было всё.
@crashedking1931
@crashedking1931 9 месяцев назад
Yea a few things that a DIY could mess up. Thanks for spelling that out.
@robertkeefer2128
@robertkeefer2128 4 года назад
This is great I’m getting ready to do this to my yj thank you
@shawnjoe9187
@shawnjoe9187 3 года назад
What kit did you go with? Im looking to do this to my YJ as well.
@robertkeefer2128
@robertkeefer2128 3 года назад
You won’t believe this but I got all of the control arms and springs for a JL off eBay then fabricated all of the mounting brackets
@FMJeeping
@FMJeeping 4 года назад
Perfect timing . I'm starting to plan a 4 link in the rear of my xj. I know it's not the same, but the theory should be . Thanks
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Yep, theory’s the same but you will have a few more steps for sure, lol.
@OverlandBrasil
@OverlandBrasil 4 года назад
Nice congrats for your channel
@marcelnunez3525
@marcelnunez3525 4 года назад
if you put your upper links closer together at the axle youll create more angle at the upper links which will help with side loading and greatly lengthen the life of your upper heims.
@masonsimacek1156
@masonsimacek1156 Год назад
So it is better to make them closer?
@rowlinstoned3715
@rowlinstoned3715 Год назад
Very good video. U explain so well. Doesn't seem so foreign now.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 👊🏻
@deepakrajurs8390
@deepakrajurs8390 4 года назад
Great was really hell lot of information with this I get confident to convert mine as well
@bobhilly546312156332
@bobhilly546312156332 Год назад
This really makes me wanna 4 link my truck, I don’t offroad it but
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
4 link is always a good idea 👍🏻
@GMGUY1000
@GMGUY1000 9 месяцев назад
Im put 9 inch in,done with d44.2000 tj ls soon
@jaredwilliams5252
@jaredwilliams5252 3 года назад
Hello from Tri-Cities Washington
@imzackson
@imzackson 4 года назад
well done to say the least! i wish you many views and large you tube kick backs
@daalnweaver4354
@daalnweaver4354 3 года назад
I run open gear lube on my joints... no squeak no rust
@thefred1392
@thefred1392 4 года назад
Very informative thank you! Someday I hope to do this in my xj.
@surfstarcc1
@surfstarcc1 Год назад
Good stuff right here! I'm planning a similar 4 link setup for a mud truck I'm building.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Nice 👊🏻
@surfstarcc1
@surfstarcc1 Год назад
@@MuddyBeards4X4 good knowledge on this video!! I'm trying to learn as much as I can get before I attack this project. Haha
@OffroadMilitia
@OffroadMilitia 3 года назад
If you have 30 degrees on the top links in 10 degrees on the bottom links that still gives you 40 degrees overall
@rmmmodifikasi
@rmmmodifikasi 3 года назад
Good
@ricardooliveirasette3994
@ricardooliveirasette3994 Год назад
Sensacional
@luciankristov6436
@luciankristov6436 4 года назад
Ive got the titanium 200 unlimited. I love mine. Welds amazing. Crazy what kinda performance it gives vs its price. Nice link setup man.its got me thinking
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Yep, I love it so far too. No problems. Works great every time I use it.
@whirlwindjml
@whirlwindjml 2 года назад
They do awsome on aluminum as well!
@cadewarnke3715
@cadewarnke3715 4 года назад
Good informative video! In the process of 4 linking my tj and this helped a lot! Love the videos. Hopefully I get it done soon, I wanna hit Elbe hills before I leave Washington this summer
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Thanks man, once I get back from ejs we definitely will be hitting up Elbe👍🏻
@cole33333333
@cole33333333 4 года назад
How would you verify, you have the right size bump stops and or the correct number of hockey pucks?
@jeremyreber661
@jeremyreber661 2 года назад
Excellent video, one question is the top link flat at ride height and how did you determine that. If a guy was starting from scratch on a project would it be best to order springs first?
@Aggressiveopinions
@Aggressiveopinions 4 года назад
Would this work on a tube rear frame 1970s ford prerunner
@erice5429
@erice5429 3 года назад
Question, do those calculations also apply to to a street 4 link? thank you
@colewilk6018
@colewilk6018 3 года назад
Is it basically the same basic rules with a trailing arm that the shock mounts in the center vs what u did (For prerunner)
@636Biker
@636Biker 2 года назад
Does the lower link bracket on the axle have to be below the center line of the axle? Having problems getting my arm separation on the axle correct. Thanks!
@abdig.siregar9228
@abdig.siregar9228 4 года назад
Have you designed & applied for Landcruiser GX80 barndoors?
@joshanactualamerican495
@joshanactualamerican495 4 года назад
this video is fucking awesome, well done
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Lol, thanks man.
@jrpefx
@jrpefx 4 года назад
Super good job. I know it is too late but have you heard about the Weld Through Primer. I wished I had it when I did my axle truss.Keep up the great work. P.S. I found you on Dirt Lifestyle.
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Thanks man, I never heard of it either, I will check it out👊🏻
@robertsnyder1446
@robertsnyder1446 3 года назад
great video i will be doing this soon but i do have one Newbe question, when your using the plumb bob, what are measuring or lining up with it?
@MuddyBeards4X4
@MuddyBeards4X4 3 года назад
Thanks, a known spot on the axle and frame. So measures and make a mark in the same spot on both sides of the axle. I would actually recommend getting a laser, they are only like $60 and makes life easier. I bought a laser and checked it after I was all done and it was all perfectly centered so the plum bobs do work.
@jasonwaren8984
@jasonwaren8984 4 года назад
Great Video, very informative. Can you clear a couple of things up though? I got lost on how you came up with the 9.5” spacing between upper and lower links at the axle instead of the 10” you mentioned in the beginning. Was this from the calculator you mentioned? Also what determined where you set the first LCA bracket on the frame? Was that set by the bracket or the kit from Barnes? Or was your LCA a set number and you just verified the measurement?
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
I ended up at 9” of axle link separation, the 9.5” was because of the extra 1/2” on top of the framing square. At 10” the Lca bracket on the axle was just hanging down too low. The lca bracket on the frame I located it as far back as possible, up against my skid plate and then measured everything off of that. Thanks for watching🤟🏻
@jkgkjgkijk
@jkgkjgkijk Год назад
Be nice if you had the facility to pull the body off. Doing it this way is brutal, as opposed to bare frame.
@bertbccfu9564
@bertbccfu9564 Год назад
I am thinking of leaving my leaf springs in for as long as possible while I build it ,that way it holds it exactly where it should and I won't cut them out until the last possible moment when I have to ,what do you think of that idea?, I forgot to add I'll be working on a 98 Toyota Tacoma 4x4
@user-fr6wj3er3q
@user-fr6wj3er3q 2 года назад
Are the upper and lower control arms the same length?
@markbrites1907
@markbrites1907 4 года назад
So the inner frame link mount (upper link bracket not on truss) is set at 20 degrees from the factory, that is you have to weld it together and is there tabs so the bracket goes together only 1 way so you can weld it? Thanks !
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
They have 0,10 or 20 degree brackets. There are no tabs to hold it into place to accommodate different mounting widths. So you just install your joint, tack it together and take the joint out and fully weld it.
@yobop6072
@yobop6072 Год назад
Was your plumb bob centered to the tube center or the front edge?
@stevespiteri2079
@stevespiteri2079 4 года назад
so everything was done on ride height correct ?
@OldSkoolF
@OldSkoolF 3 года назад
Stick to a good welder and you'll never be sorry. Good vid...
@dabrownconservative7843
@dabrownconservative7843 Месяц назад
In regards to the truss. How did you know where to weld it on the axle? I've purchased a Barnes truss for my rear Dana35 and I feel nervous about welding it in the wrong position that it affects pinion angle.
@jeremy8715
@jeremy8715 4 года назад
Would it be advisable to use a welding blanket to cover the fuel / brake lines?
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Yes, anytime I was near there I had everything wrapped in a welding blanket👍🏻
@rogerbenton2755
@rogerbenton2755 4 года назад
thanks for this vid - how much rear stretch did you wind up getting?
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
I don’t know how much I stretched the front in 2016, so my final wheel base is 98”, so my guess is about 1” front and 4” rear? Again I don’t know for sure.
@tylersweeney9096
@tylersweeney9096 4 года назад
awesome video.. cant find the coilover setup vid :( did you 4 link the front as well? would love to see that. You explain things very well so it would be cool to see how to do it with steering and oil pans etc.
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
I have been getting emails about this lately. I believe I will make a video finishing up the rear and also explaining the front setup as well. Thanks for watching🤟🏻
@erice5429
@erice5429 2 года назад
Great video thank you.. Question, does the same apply to build a street suspension for a little truck? Please, it is my project. Thank you
@MuddyBeards4X4
@MuddyBeards4X4 2 года назад
Same concept applies for any 4 link suspension
@eatingglue6393
@eatingglue6393 3 года назад
One of the best rear 4link videos on RU-vid info wise. 🚙🍆
@Arykperry
@Arykperry 4 года назад
Good job but you should practice laying some welding beads , you would improve really fast !!
@r.mshadow9713
@r.mshadow9713 2 года назад
Im probably going to have a lot of questions because im in the process of trying to lift my jeep but i need some guidance as to how to do it i want to run 38s on it but i want to do it correctly 😅
@RyanPalmerRegeneratetreatment
How do you like the Titan welder?
@eldiablobiker
@eldiablobiker 4 года назад
What length coilovers are you running in the rear? I have the metalcloak long arm kit and triangulated rear. I’m currently trying to maximize my rear suspension. Doing the frenched towers etc. the part I am trying to figure out is at full up travel my driveshaft is bottomed out. Now if I go full droop to the 14” I want my driveshaft comes apart.
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
They are 14”.
@davidrobertson3211
@davidrobertson3211 4 года назад
Would a set-up like this be street legal and if so would you recommend it... Love the idea of all this for my daily driver that hits the trails and rocks as well. Just looking for some advice on it all beforehand.
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
As far as legality you would have to look up your local laws as I do not drive this on the street. This would definitely be an upgrade compared to factory.
@ninja63639
@ninja63639 4 года назад
Does the 25% of tire height apply to any and every vehicle that a 4 links going under?
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
I would say yes. Same concept for any vehicle with a 4 link.
@mattpulido9834
@mattpulido9834 11 месяцев назад
I'm not getting 40 degree angle on the upper links. How can I get the 40 degree on an early bronco? Thank you!
@BigCatRiverFishing
@BigCatRiverFishing 4 года назад
What are the benefits of the 9 inch over the 8.8? Also what is the width difference of the two? Awesome video man. I have been considering that exact 4 link kit from Barnes.
@MuddyBeards4X4
@MuddyBeards4X4 4 года назад
Nice, I am planning on doing a video on this, but I am a little overwhelmed trying to get everything done before Easter Jeep Safari. I will get to it eventually.
Далее
아이스크림으로 체감되는 요즘 물가
00:16