How to Build a CUSTOM FIBERGLASS SUBWOOFER BOX INFINITI Q | BUILT FOR TRUNK CORNER | SHORT

Подписаться 14 тыс.

Просмотров 36 тыс.

50% 1

Here is how to build a custom fiberglass subwoofer enclosure, built for the corner of your trunk? I will show you how. This is my first attempt with this so I will not only teach you what to do but you can learn through my mistakes as I show you ways to improve on what I have done.
Custom Fiberglass Subwoofer Enclosure Build for Infiniti Q50 for corner of the trunk.
I will show you how to do the fiberglass work, and how to custom fit it in the corner of your car. I show how to measure the cubic air space. I also show how to get it ready for speaker fitment. we complete the outer portion of the subwoofer enclosure. We carpet the custom enclosure and run the wires for the subwoofer and amplifier. We then install the subwoofer into the enclosure and test it out!
WAYS TO SUPPORT THE CHANNEL:
Please SUBSCRIBE
Please hit the LIKE BUTTON
Please SHARE with a friend
Support me on my Patreon Page:
www.patreon.com/user?u=32731214
Audiopipe 1 Pair 10" RING-10BZ MDF Speaker Ring Recess with Bezel MOUNTING Spacer RECESSED
amzn.to/3dDRnG6
PERFECTVestil KNEE-D Rolling Knee Dolly with Foam Cushioned Knee Cups, 350 lbs Capacity, 10" Length, 20-1/4" Width
amzn.to/2yoYVx9
2Pcs Gas Proof Active Carbon Mask,6200 Paint, for Pesticide and Formaldehyde Prevention, Decoration and Polishing
amzn.to/35CDN2l
3M 3004.7879 115 Fluid Ounces Fiberglass Resin (get 3 containers)
amzn.to/3fsdS1S
Nordstrand Fiberglass Cloth Roll - Chopped Strand Mat 50" x 360" 1.5 Oz - Resin & Epoxy Compatible - E-glass Fiber Glass Sheet CSM GRP for Molding Casting Roofing Boat Marine Repair
amzn.to/35AI8TM
Kobalt 2pk Stainless Steel Scissors, Non Slip Grip, 8.5" & 5.5" Long
amzn.to/2yqCs2K
I WOULD NOT BUY THE BONDO 357 SPREADERS, USE THE CHEAP BRUSHES BELOW
Bondo 357 Plastic Spreaders 3 Piece
amzn.to/2UuqvxF
Pro Grade - Chip Paint Brushes - 12 Ea 3 Inch Chip Paint Brush
amzn.to/3b7gXkv
Psychotic by Alexander Nakarada | www.serpentsoundstudios.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...
Jack the Lumberer by Alexander Nakarada | www.serpentsoundstudios.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...
Stoned by Alexander Nakarada | www.serpentsoundstudios.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...
Beach by MBB | / mbbofficial
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/...
On The Wave by Groove Bakery | groovebakery.com
Music promoted by www.free-stock-music.com
Attribution-NoDerivatives 4.0 International (CC BY-ND 4.0)
creativecommons.org/licenses/...
Limewire by Flanzen | / flanzen
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...
www.bensound.com
Rewind by Jay Someday | / jaysomeday
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...
You by LiQWYD | / liqwyd
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...
Windsurfing by Ron Gelinas Chillout Lounge | / atmospheric-mu. .
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...
www.bensound.com
Edited with iMovie
Music: www.bensound.com
Email me:
theimprovementch@gmail.com

Хобби

Опубликовано:

3 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@ijonnypro 2 года назад

I gotta say, you did pretty much everything the wrong way lmao. However, your humility is greatly appreciated. While I’ve watched a plethora of videos on how to make a fiberglass sub box the correct way, they didn’t show me what not to do, then explain how to correct it. It was really helpful to visually see what I would’ve done as a first time builder and now know how to go about this per your instructions. Also, your box still came out really good in the end! Much appreciated, sir! Thanks for the wholesome content 👍🏻

@TheImprovementChannel 2 года назад

My pleasure!

@trificullife8612 2 года назад

Really want to make something like this for my trunk for space needed, without losing bass tho. Studying these videos for my son and me to start something like this.Just started my first system ever at my age and now starting to see where i want my sound to be with where i want my speakers, especially the trunk. Thanks for the video.

@jorgepizarro3327 3 года назад

And remember, which I'm pretty sure you learned by now, the strength is not in the quantity of resin but in the layers of resin and fiberglass mixed. You want enough resin just to soak your fiberglass mat or your fiberglass sheets and then layer it up

@TheImprovementChannel 3 года назад

Great point!

@jorgepizarro3327 3 года назад

Looks pretty good for your first build. Practice makes perfect 💪

@TheImprovementChannel 3 года назад

Thank you!!

@louislee535 6 месяцев назад

Excellent

@TheImprovementChannel 6 месяцев назад

Thank you!

@marudhanayagammuthuvel2007 3 года назад

Nice and good try and it has come out nicely, good job friend,

@TheImprovementChannel 3 года назад

Thank you for the encouragement!

@triaddistribution9307 4 года назад

Great build! I like how you gave tips throughout on things you would have done differently. I think it was good for your first time doing it. How much did the Sub cost?

@TheImprovementChannel 4 года назад

Thank you! The sub is around $100 and it is a great value! Are you planning a build?

@triaddistribution9307 4 года назад

The Improvement Channel $100 is not bad, I may contact them and do a fiberglass box. It looks doable.

@TheImprovementChannel 4 года назад

@@triaddistribution9307 Good luck, let me know if I can help!

@camacho212594 3 года назад

I noticed you had a lot of resin in the cup, did you use the hardener as well?

@TheImprovementChannel 3 года назад

Yes, I did use hardener. It was hot outside and it would be hard in about 10 mins.

@SlashtaCross 3 года назад

How is the box holding up? I've got a 2016 chevy cruze limited and I use the trunk a lot so I wanted to build an enclosure behind the wheel well for my 10'' Rockford Fosgate subwoofer. I've watched many videos on building these boxes and am quite confidant I could accomplish this myself. Now I'm just trying to narrow down the shopping list of items I'll need since I have zero experience with fiberglass and what tools you need. I'm going to cut a custom shape of MDF for the bottom of the enclosure and then do the same for the whole face of the enclosure and wrap it together with the fiberglass.

@TheImprovementChannel 3 года назад

I screw some Velcro to my car trunk interior and stuck them to the back of the trunk box. That and the box will naturally fit tight mine stayed in place.

@SlashtaCross 3 года назад

The Improvement Channel so the box is still doing good? I wanna be sure to make mine thick enough.

@TheImprovementChannel 3 года назад

SlashtaCross yes mine has held up great. Also, I have a longer version of the same video you might check out.

@hunterlaswell9705 2 года назад

Did you use screws or glue to keep the post for the subwoofer ring intact with the fiberglass?!

@TheImprovementChannel 2 года назад

Screws

@mansquirrel6410 8 месяцев назад

So sick. I want to do something similar in an FJ cruiser, but with an MDF face. How much resin did this take? I’d like to keep it to a gallon to keep cost down

@TheImprovementChannel 8 месяцев назад

I wasted a lot, you may be able to get away with just a gallon with a mdf front.

@quirky_hehe 10 месяцев назад

What type of tape did you use?

@TheImprovementChannel 9 месяцев назад

Cheap painters tape.

@AllSoWavyReese Год назад

What is the mdf at the bottom for? Anyone kno

@TheImprovementChannel Год назад

What do you mean by MSG?

@cts7648 3 года назад

What was your final cost for the build?

@TheImprovementChannel 3 года назад

My best guess is $175.

@trificullife8612 2 года назад

How long did this take?

@TheImprovementChannel 2 года назад

Probably about 20 hrs

@nathanbulmer799 2 года назад

Beautiful! Now clay bar that poor car that has overspray all over it haha

@TheImprovementChannel 2 года назад

Lol, you are correct, I need to do that.

@agentemah5670 3 года назад

Box without air hole ?? Its normal or ,,,

@TheImprovementChannel 3 года назад

You can do ported or non ported.

@inspectorsteve2287 28 дней назад

Did you mention you cant just make any size box? People should know each sub has a certain amount of airspace needed. Too small or too big could cut down on the quality of sound and performance. Worst case it could damage your speaker. You know all that but your viewers might now.

@TheImprovementChannel 27 дней назад

Thank you for bringing that up, good point!