Grab my FREE Floating Mantel Plans ⬇️
atimprovements.com/diy-floati...
(Plans are linked at the end of the article 👍)
Use Code ANDREW10 for 10% off the Base Camp Dust Mask: www.bcmask.com
Learn how to build a floating mantel (or shelf) with this DIY, step-by-step guide. I built this floating mantel to help fill the empty space under my TV and I think it definitely helps with the aesthetics of the room.
To build this floating Mantel, you will need the following tools and materials (some of these are optional for sure):
- Two 2"x10"x6' Pieces of Lumber: go.magik.ly/ml/205c1/
- One 2"x6"x8' Piece of Lumber: go.magik.ly/ml/1zng0/
- Circular Saw: amzn.to/3uj6CBS
- Wood Glue: amzn.to/4bCcG9x
- Wood Filler: amzn.to/4bkAXR3
- Painter's Tape: amzn.to/3UtegV0
- 6' Level: amzn.to/3Ul5PuO
- Laser Level (optional): amzn.to/3StgPUt
- Brad Nailer: amzn.to/3SrVaM5
- Sander + 120 grit sandpaper: amzn.to/3HHrbuV
- Stain: amzn.to/49me3XS
- Dust Mask: amzn.to/3uD1RmN
To build this floating mantel / shelf, start by cutting all of the individual pieces of lumber to size based on the type of mantel you are building. Next, cut 45 degree miters on the top, bottom, front, and sides of the mantel as required.
To build the mounting bracket, use a piece of 2"x4" lumber and cut small pieces of blocking that will attach to the longer mounting rail. Attach the pieces of blocking to the mounting rail using two screws per connection.
To assemble the floating mantel / shelf, lay out the front, top, and bottom and attach them together with painter's tape. Apply wood glue to the mitered edges and then fold the top, front, and bottom together using the painter's tape to keep everything together. Ensure that the top and bottom are at a 90 degree angle and then use some more painter's tape to hold them in place.
Next, attach the sides of the floating mantel using wood glue and painter's tape.
Once you are happy with how all of the edges are lining up, use a brad nailer to nail all five pieces of the floating mantle together. Allow the glue to cure overnight.
The next day, apply wood filler to any of the mitered edges that need to be touched up. Allow the wood filler to dry and then sand the entire floating mantel / shelf using 120 grit sandpaper.
Finally, stain the mantel / shelf to the color of your choosing.
To hand the mantle, first attach the mounting bracing to the wall by screwing it into the studs. Ensure that the mounting bracket is perfectly level before screwing it to the walls.
Next, slide the mantle onto the mounting bracket and secure it in place using a few brad nails.
Your DIY floating mantel / vanity project is now complete!
Be sure to subscribe and hit the notification bell so you don't miss any future videos! I have some big plans for the font of the house that I hope will boost the curb appeal!
Follow me on Instagram: / atimprovements
Check out my Blog: Atimprovements.com
Subscribe to my RU-vid Channel ⬇️ ru-vid.com...
Check out my Website for additional DIY Content: atimprovements.com
▬▬▬▬▬▬▬▬▬▬▬▬▬
🎥 MY RU-vid GEAR
Camera (Iphone Max): amzn.to/3d5HxSo
Microphone (Maono Condenser Mic): amzn.to/3RCAb7N
Tripod: amzn.to/3Rz5Gj3
Mini Tripod: amzn.to/3Rvt2WM
Lighting: amzn.to/3d4QdZ5
▬▬▬▬▬▬▬▬▬▬▬▬▬
🛠🧰 TOOLS THAT I USE
Carbide Tipped Drill Bit: amzn.to/3S0hdIM
Tapcon Screws: amzn.to/3OxEWxh
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Circular Saw: amzn.to/3BFotC4
Masonry Drill: amzn.to/36yP1JW
Level: amzn.to/3HowUDn
Hammer: amzn.to/35fIpiT
Chalk Line: amzn.to/3MwSDg8
Clamps: amzn.to/3HLqwpK
Drill: amzn.to/3JICKkk
Sawzall: amzn.to/3HcdeSI
Circular Saw: amzn.to/3BFotC4
Jig saw: amzn.to/3I6lcyd
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Roofing Nailer: amzn.to/3BEAuYF
Orbital Sander: amzn.to/34UwlUD
Bar Clamps: amzn.to/3JjFrJe
▬▬▬▬▬▬▬▬▬▬▬▬▬
Thank you so much for watching!
*All content on the Andrew Thron Improvements RU-vid channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
17 фев 2024
