No video :(

How to build a Motion Sim Racing Rig - Start your journey!

Подписаться 7 тыс.

Просмотров 108 тыс.

50% 1

I am going to show you how to build a Motion Sim Racing Rig out of basic parts anyone can get.
So start your journey here! This is a true DIY Motion Simulator! Here's how to do it on the cheap!
00:00 I will show you how I built this 3 DOF motion racing simulator out of basic parts
00:15 pre lockdown Logitech setup
00:50 x simulator forum PGSAW 50:1 crab pot puller motors 12V
01:00 parts Arduino uno and IBT-2 Motor Controllers
01:22 both motors working on with SMC3 software
01:50 I started designing my rig
02:15 Christmas gift - stationary rig - had to tear it apart!
04:00 Building the seat frame
04:45 Bought a cheap MIG welder to weld metal sections together
05:10 U joint from the junkyard
05:50 designed and built motor mounts
06:12 added traction loss motor and my WILD first test Drive!
06:43 Added VR oculus Rift CV1
07:00 recent upgrades Thanks for watching! DMAX
50:1 12volt motors just search Ebay for GEAR MOTOR 12 VOLT GREAT FOR SAWMILL/CRAB POT PULL/FEED/SIMULATOR 75-80RPM 50:1 (sold by PGSAW in Canada)
Hall Effect Potentiometers DIGI-Key and others PN 987-1392-ND
www.digikey.co...
Arduino UNO R3 - amazon. I have also used the cheaper ELEGOO clone.
www.amazon.com...
IBT-2 motor controllers up to 43amps (which is a lot!)
www.amazon.com...
other motor controllers you could consider using are JRK12V12 or Sabertooth but I use IBT-2's
XSIMULATOR forum - Info specifically for arduino/IBT-2 for 1 to 3 Motors. You can use up to three motors per arduino. But you each motor needs it's own IBT-2 controller.
www.xsimulator...
DMAX motion sim build posts on XSimulator
www.xsimulator...
If you have questions, let me know. And be sure to Subscribe and Thumbs up!! Thanks DMAX

Опубликовано:

14 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 393

@CantShakeTheCliche 3 года назад

Just rewatched as putting it into the Magazine. Great build buddy, very well executed.

@DMAX_DIY 3 года назад

Thanks my friend! I appreciate you checking it out cause It's just going to get better and better! Love the MAG my friend! DMAX 🖖

@riddhisiddhi9604 2 года назад

Hi sir, game plugin app is not getting downloaded in my computer . is there any free license for it .

@DMAX_DIY 2 года назад

@@riddhisiddhi9604 Hi, the Plug in app is part of the simtools installation .. Here is a video I did on the plug in updator .. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QYzV9ler328.html

@DMAX_DIY 3 года назад

Ok Guys! I'm making a new 3 video 'series' on how to upgrade your 'static' rig to a seat mover so check back on this channel and as always, leave a few comments! DMAX

@parkur455 Месяц назад

DMAX your the best man! Thank you soo much for shairing your knowledge and project details thats soo important for sim comunty to have that type of examples. Wish you best

@hitmanhartman1394 6 месяцев назад

I just got off a cruise ship that had motion sim racing setups and I now want one but the specific ones they had were $77k a piece so my ingenuity is getting the better of me and now I want to build one

@DMAX_DIY 6 месяцев назад

Same here.. You can build one yourself.. Lot and lots of guys have done it.. I'm working on a new one right now in fact! Here is my newer series ru-vid.com/group/PLO8l70qEp71MER1P0D-BBZza_gqzzmgp_

@EricHaskins71 3 года назад

I love the u-joint idea!!!! Brilliant

@DMAX_DIY 3 года назад

Thanks for the comment my friend! Yeah, super strong - just weld it in.. good to go.. DMAX

@abrammanoge 3 года назад

You are heaven sent! Ive been looking for someone that actually shares information. Im Gonna make one to play racing with my son in vr

@DMAX_DIY 3 года назад

Abram! Awesome to hear and thanks for the comment my friend! I try to share as much as I remember to! But cant remember it all so feel free to subscribe and ask questions! It may take me a few hours to reply 'cause I work and stuff.. but You're welcome anytime! DMAX

@tommytucker4660 3 года назад

I have been sim racing for over 10 years ..and I'm very good with my tools .time to start my dof. Chassis

@DMAX_DIY 3 года назад

Sounds Great my friend! I tell ya, adding that traction loss frame is the bomb! I would not have it any other way now.. (except a 6DOF!) Thanks for the comment! DMAX

@dicko846 2 года назад

Thank you D max Thank you I keep rewatching all the videos over and over to get it right ✅

@DMAX_DIY 2 года назад

Thanks my friend! If you have any questions.. just let me know.. DMAX

@lemboizzz 2 года назад

This is where i would start my research on motion sim. this is a well made video. Thank u sir, u are awesome

@DMAX_DIY 2 года назад

That's a fantastic comment. Great idea to get the scope of work understood. Hope you get time to check out more of the videos I have.. they are all about building your own motion simulator. Also check the x-simulator.net forum. That's where I started my research and tons of info there. Dave

@lemboizzz 2 года назад

yes sir finally i had some great infos from your videos regarding building using 2 motors. gonna start with 2 DOF. watching yours easily fed my mind with the idea

@DMAX_DIY 2 года назад

@@lemboizzz Great.. It's fantastic once you get it running my friend! If you have any questions, just post them here and hopefully I can see them and answer them DMAx

@brailynnematheny167 3 года назад

A good teacher can break down a complicated subject in a way that anyone can understand. Great job 👍

@DMAX_DIY 3 года назад

Thanks for the comment and the LIKE. I really appreciate it! - BTW did you ever get that Rollercoaster SIM working again. Rollercoaster tycoon, that is.. This type of Rig can run off the data - And with the WIND SIM.. Should be great! DMAX

@SirSpatsGaming 3 года назад

Thanks so much for this overview. When i get some time I would love to build one and this broke it down into easy pieces to understand what I would need to do. When i look at your rig, it looks so complicated, but actually its just simple steps. Really hoping this video gets some traction as you have some great content.

@DMAX_DIY 3 года назад

Thanks for taking a look! It's really just a bunch of parts that work together pretty well. Takes a little time to build it. But by making it yourself, if something acts weird, you know what it is and it's usually pretty cheap to fix. If something goes haywire with a commercial rig, you have to send it in. We all pretty much use the same components anyway (from what I can see). In any case, this thing is an absolute blast to drive in VR. Now with the Wind Sim, it's even Cooler haha DMAX😀

@roddy6924 3 года назад

SirSpats - I'll be doing this asap. plz stay in touch

@DMAX_DIY 3 года назад

@@roddy6924 Thanks Guys! Comments are awesome! DMAX

@4g63_Everything 3 года назад

this must be mass produced! 😍😍👌🏼👌🏼👌🏼

@DMAX_DIY 3 года назад

Thanks for the comment my friend! I do appreciate it! Glad you liked the videos. DMAX

@gearjammer2107 2 года назад

For someone that's never welded before, your welds look awesome man. 👌... sweet racing rig.

@DMAX_DIY 2 года назад

Thanks Gear Jammer.. (nice name btw). DMAX

@theojohansson Год назад

I just finished building really good and works great👌

@DMAX_DIY Год назад

Fantastic my friend! I've got a couple new series out if you need any more inspiration.. 2023 and all that ! Dave

@elbowsout6301 3 года назад

Awesome video. So many of us have gone through something similar over the past year and a half. I Personally went from a Thrustmaster wheel attached to a laptop stand in front of the TV to a full cockpit with DD wheel butt kicker VR etc. A buddy of mine in his 60's has 2 full rigs now and is contemplating a 3rd lol. What you have done here is inspiring.

@DMAX_DIY 3 года назад

DANG!! Yep I know what you mean Travis! It's so cool when you put your willpower into making something better! I appreciate your comment my friend! I'm still improving the rig for better response but not posted any of those videos yet.. Thanks so much for commenting.. It DOES mean a lot! DMAX

@PPekka 4 месяца назад

Awesome build. I drive in VR too, but no motion or buttkickers yet. Hope I have (make) the time to build motion someday.

@DMAX_DIY 4 месяца назад

Thanks! Yeah, VR is considerably more immersive than not having it! Keep pluggin away and have fun! dave

@nicholasgillespie2122 2 года назад

This is my new favours channel! I never thought this was possibly diy but you’ve inspired me to begin my own research. Cheers

@DMAX_DIY 2 года назад

Thanks Nicholas! That's so COOL! Yeah.. Just click on a few of my videos and check out the info everyone has posted on x-simulator.net.. You'll be moving soon! Incredible.. hard to describe.. Other than it's like actually being IN the car.. DMAX

@cowjazz7906 14 дней назад

huge thanks from China! we will build one for our game~

@justanotherguy9664 2 года назад

2:15: that's one of the simplest and most inspiring pics i have seen - thank you. Oh, the rest of the vid is great as well.

@DMAX_DIY 2 года назад

Thanks my friend.. Quite a few people have been able to make the jump to motion recently.. Thanks for commenting.. DMAX

@elcamel1017 2 года назад

man im looking at making my own now this is cool

@DMAX_DIY 2 года назад

Thanks for the comment my friend. Lot of great info on the xsimulator.net forum on this build and others and lot of links in the description so be sure to take a look at those too..! DMAX

@I_Like__bananas 3 года назад

I love your attitude

@DMAX_DIY 3 года назад

Jonny! Thanks for the comment! You should see me racing the rig.. It's an absolute blast! DMAX

@TheDeadsideofYouTube 3 года назад

Omg. Dude that's an awesome build. Would be so cool using that with a VR headset at the same time. Full virtual reality. Edited. I just looked in the videos. You already thought of it 🤣

@DMAX_DIY 3 года назад

Dead Side.. Thanks for the comment my friend.. Yeah It's so friggin cool.. I just love it! Pretty real and allows me to 'almost' drive expensive cars! DMAX

@oliverf944 Год назад

Epic. I just bought Logitech wheel and pedals for vr racing and built an mdf sim cockpit to hold it all. Now I’m looking at 3dof rig too. All in one week 😂

@DMAX_DIY Год назад

Yeah the Logitech wheel and pedal setup are very light.. When I swapped over to the Fanatec.. way way heavier.. I had to re-balance the rig..

@DIYflyer 2 года назад

Awesome. Thanks for sharing

@DMAX_DIY 2 года назад

Thanks for your comment! More to come! DMAX

@plotman3867 Год назад

I just wanted to say thank you for the vid, it was really well made and intriguing, it has me wanting to create something lol

@DMAX_DIY Год назад

Thanks for the comment and the kudos! Yeah I've been working on these things for a few years now and hopefully you can find time to watch my other videos.. I'm working on a 'compact' frame now which should have a smaller 'footprint'.. but bring the same responsiveness.. Dave

@morcheebix 3 года назад

This looks powerful. I’m a machinist with some welder buddies and would love to make one of these!

@DMAX_DIY 3 года назад

Thanks for the comment my friend! Yeah, motion rigs are way too cool. I absolutely love it. Making another one right now - a setmover project - for anyone who want motion, but not a full frame. DMAX

@nikolawandler9399 7 месяцев назад

@@DMAX_DIY Subscribed! Would you mind elaborating what translates the signal from the game to the motors for the motion? I am also a machinist and I want to build one and my biggest holdback is not understanding what's making the motion. Is it software? How do you know how many pulses of the motor to create the desired motion? Am i overthinking it?

@speedtriprr537 2 года назад

Love this!

@DMAX_DIY 2 года назад

Cool my friend! Thanks for the comment! DMAX

@trubaduri 3 года назад

This is really awesome. I love it so much. Thanks for sharing my Racing brother. You are a true Racing fan and a Legend. Cheers and stay awesome.

@DMAX_DIY 3 года назад

Cool post my friend! I'll have something good soon.! DMAX motion sim ch

@vadimm6432 3 года назад

Awesome! Love the motor solution

@DMAX_DIY 3 года назад

Thanks for the comment my friend! Yeah it works pretty great! I'm racing it tomorrow for sure! DMAX

@mohdrafie7434 3 года назад

tumb uppp ....u did a great job..... awesome

@DMAX_DIY 3 года назад

Thanks Mohd Rafie.. I appreciate it. Just having some fun, might as well show folks !! DMAX

@SackyX 2 года назад

Well done sir!

@DMAX_DIY 2 года назад

Thanks my friend! More to come soon.. DMAX

@BrownieDogsEbay 3 года назад

NICE. I may have to give this a shot!

@DMAX_DIY 3 года назад

Mike, It took a little while to build but man was it worth it!! DMAX

@Bluetoothz32 3 месяца назад

Thanks! I'm just getting the idea to build one and I knew there was a cheap solution!

@juanesteban8827 2 года назад

Awesome job but may I suggest finding someone w/ experience in high end electronic installs (home theater, car audio/ video, etc) to help clean up your wiring a bit. I've found a second set of eyes is always beneficial especially on longer term projects. Incredible ingenuity nonetheless!

@DMAX_DIY 2 года назад

Juan, You are probably right.. But these are both just 'test' simulators. super basic and just testing parts out to see what happens.. I actually plan on building a real motion rig and building in wiring tunnels etc into the frames but have not started that project yet.. Soon though, I'll concentrate on getting things a bit more 'permanent' Thanks for the comment! Dave

@WilsonBradleyTheOfficial 2 года назад

Beautiful.. Interested in doing this for my Next Level Racing rig (1st gen) . Glad to see your VR.. That is the only way to go these days.

@DMAX_DIY 2 года назад

Yeah my friend! YT did not notify me of your comment until now .. 4 weeks later.. Crazy.. VR is definitely the way to go.. Absolutely love it! That NLR rig would be pretty dang cool to modify for motion.. Just saying! Keep me posted! DMAX

@tednicholl7025 2 года назад

Great content bro', that was a fun watch!✌😎

@DMAX_DIY 2 года назад

Thanks for taking a look Ted.. I appreciate the comments! DMAX

@connerblalock2734 3 года назад

very cool man i dont got any of the skills u got for this loll u fr came to a motion chair not knowing crap and some how just know how to do the tec stuff lol and even learned to weld

@DMAX_DIY 3 года назад

That ok my brother.. I didn't know how to do much before 2020 I was driving on a desk with my old Driving force wheel.. Did not even know this stuff existed till I got bored and starting looking a youtube.. amazing stuff people make.. I just wanted to be 'get some of that' for myself.. Thanks for the comment! DMAX

@SticksAandstonesBozo 9 месяцев назад

Sooooo few people with the ability to do this stuff in a real way that there is so little in the way of basic info. Thanks for this it gets me started at least knowing where to start getting things together.

@DMAX_DIY 9 месяцев назад

Great Comment and observation.. Yeah. 3 years ago I barely knew what any of these things were.. I did a bit a poking around on YT and found X simulator.net. Used the info to build my first motion sim. I had no idea what any of this was except I did like Grand Turismo on the play station with a controller but watching a few things made me think.. I can do that too - but didnt see any videos on it.. - So there we go. I decided to post up some stuff cause it worked pretty good. I have a new video coming out in the next couple days on the COMPACT simulator . Hope you have time to watch.. I'm working on the edit right now. And thanks for your comment.. Keeps me plugged in and helps me remember to keep posting stuff. Dave

@SticksAandstonesBozo 9 месяцев назад

@@DMAX_DIY have you looked into / found / built anything using the piston style D box style ? I’m really thinking that’s the way to go as that seems to be the most popular and highly touted motion platform these days. If I can find the hardware ( I haven’t started really trying yet ) and there are software solutions to use it (which clearly there are) then I may try to go that route. Any suggestions or have you come across other DIY piston style ? I don’t really know what else to call them. But it’s what D box uses , one on each corner of the rig.

@DMAX_DIY 9 месяцев назад

@@SticksAandstonesBozo so I used to mess around with a lot of pneumatic actuators back when I was involved in the Halloween Fright scene.. a long time ago. So I do read about these (electrical screw assemblies (as opposed to pneumatics) and I see the benefits. I would suggest looking up " six degrees of flight" - on YT he has not posted in a while but he was using this type of actuator.. also I am in contact with "MOTION simulators" on YT and sort of on Facebook, which I dont look at that often.. Many of those guys are building the same things.. 3 DOF, 6 DOF etc using the DIY actuators. I just have not had a chance to bite off that much yet.. YET.. Let me know if you need links to their channels.. ALL the best my friend> Dave

@SticksAandstonesBozo 9 месяцев назад

@@DMAX_DIY Ive been looking at stuff from him and you but just now going to actually start working on a setup. Thanks for the info and the videos.

@DMAX_DIY 9 месяцев назад

@@SticksAandstonesBozo Cool.. here is my new video if you want to take a look.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UXS45Z2GHMk.html

@ashcatchemgames9609 6 месяцев назад

Definitely gonna be subscribing and hopefully building a sim soon with ur videos

@DMAX_DIY 6 месяцев назад

Thanks! There's a new one I'm working on right now. should be out in a week or so.. Here's the latest series link.. Dave ru-vid.com/group/PLO8l70qEp71MER1P0D-BBZza_gqzzmgp_

@patrickb2349 3 года назад

That's awesome man. Thanks for sharing.

@DMAX_DIY 3 года назад

Thanks for the comment my friend! DMAX

@liwarsimracing 3 года назад

thanks Bro! I want to build from 0 knowledge. make rig, buttkickers, subwoofer uder seat, 5.4sub audio etc. simple Things. In future plan. cut half car with front windows and 2seats 3screen/projectors. use this like base for simple motion. active light mayby. thats the plan. thank you for share this. respect Bro👊✌️💪

@DMAX_DIY 3 года назад

Cool ideas. I am working on the zero to seat mover series now. Should be out soon. If you can handle VR, it will save you a ton of hassle cutting a car apart. That's what I use.. So the motion platoform has less weight to throw around.. Never worry about screens if you can take VR.. DMAX

@krazyhartin 2 года назад

Fantastic project! I love seeing projects like this.

@DMAX_DIY 2 года назад

Thanks for the Comment my friend! I got more of this project to come so check back if you can! DMAX

@AndyBradley1984 Год назад

Would love to build something like this. I have a decent rig and motion is all that's missing now. Huge respect for you putting this together yourself and making it from scratch

@DMAX_DIY Год назад

Hello Andy! Thanks for the comment.. I'm just finishing up a series on 3DOF build compact motion sim.. From 'scratch" check it out and I have a few Simtools Pro liscences to give a way .. so be sure to Check out video 8 and 9 for how to win.. ru-vid.com/group/PLO8l70qEp71MER1P0D-BBZza_gqzzmgp_ Dave

@saadabdullah4245 10 месяцев назад

@@DMAX_DIYhow much do you think parts would cost?

@DMAX_DIY 10 месяцев назад

@@saadabdullah4245 here is a video on the cost - take a look if you have time Dave ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4cTyjsvO-i8.html

@neonnerd1364 Год назад

This is awesome. Once I upgrade to a better pc I think I'm gonna build one of these. I built my own rig from wood and I love it even though it's not a motion Sim.

@DMAX_DIY Год назад

Nice! Tell you what though.. you dont need a very good pc to run the motion. I have a couple series where I used the worst laptop and it runs the game and the motion system at the same time.. The real reason to get the better PC would be for using VR which takes a lot of resourses.. The motion programs require hardly any processing power as all they do is read the game telemetry I/O

@neonnerd1364 Год назад

@@DMAX_DIY I plan to get a better pc to run assetto corsa since all I can run is live for speed at the moment and then get vr and then build a motion rig at some point. I also need to get a better wheel setup since I'm using a Logitech g920. It's a great wheel but when I'm drifting it just barely keeps up.

@JustBarran Год назад

You just gave me a lot of confidence in making my own

@cmdreffietrinket 2 года назад

Major kudos to you. 👍

@DMAX_DIY 2 года назад

Thanks my friend! More to come - stay tuned!

@cmdreffietrinket 2 года назад

@@DMAX_DIY I’m watching! 👍😎

@lemsi0264 3 года назад

Amazing video! clean welds for someone who never welded before

@DMAX_DIY 3 года назад

Haha! not very clean for sure.. but they seem to work if I dont burn through the metal.. Getting better at.. Appreciate your comments my friend! DMAX

@user-in4ij8iq4c 3 года назад

very nice！ great video

@DMAX_DIY 3 года назад

Thanks for the comment! I appreciate it ! DMAX

@jimsteele33 3 года назад

Thanks for this video! Liked and subscribed. Great job and great info. I've wanted to build a motion simulator for flight sims for years, your video has helped me get closer to actually taking the plunge.

@DMAX_DIY 3 года назад

Thanks for commenting Jim. A lot of people don't. There are a lot of videos on my channel to help out also check out my x-simulator.net page build. I should be dropping a few new videos soon. DMAX

@SimsRUs 3 года назад

very cool!

@DMAX_DIY 3 года назад

Thanks! It's a blast to drive in VR!! DMAX

@PFM21 3 года назад

Nice

@DMAX_DIY 3 года назад

Thanks! I try find time to race a few times a week. It's pretty immersive! Love the Wind Sim addition in VR! DMAX

@billgo7 2 года назад

Brilliant!!

@DMAX_DIY 2 года назад

Thanks my friend! It's a game changer once you get these things working! I am posting a series of videos now which would take you through the whole thing if you want to take a look.. here is the link.. Thanks for the comment! There's like 4 videos on it step by step.. I'm just finishing up the last one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5Du7pbOSe_Y.html DMAX

@DavidSanchez-jb2sj 3 года назад

Wao, I want to build the same!

@DMAX_DIY 3 года назад

Thanks my friend! Just check out the channel, it's a bit on the 'mental' side as you will see but If "I" can do it, I'm sure that "YOU" can probably do it better! DMAX

@Slakass55 Год назад

Love your shirt: 'real cars don't shift themselves'. Unfortunately given how the vast majority of car owners don't drive a car with a real transmission, the point is lost in them. But hey, real drivers get it. Cheers on a very nice rig.

@DMAX_DIY Год назад

Hahah! Nice.. yea.. it is what it is.. Love the gated shifter myself.. but building a new rig and have a new series on it.. (going to try paddle shifters) I'm still old school but will give it a shot.. here is the new series if you want to take a look SLA55.. ru-vid.com/group/PLO8l70qEp71MER1P0D-BBZza_gqzzmgp_

@rustythefoxcoon5143 Год назад

This is my first time, got this…” OH GOD. GOOD LUCK. Welcome to the world of welding! Yeah it holds, but the look will start bothering you IF NOT PERFECT. Seriously this will hit you hard!

@DMAX_DIY Год назад

Yeah.. the look bothers me.. That Surprisingly the welds actually held up for 3 years so far. Which great because there is a lot of stress on these joints. Much more comfortable welding now after 3 years since this vid.. But now your right.. Dave

@ELMASQUELAMONTA Год назад

Great video my friend congratulations on your build

@DMAX_DIY Год назад

Thanks for watching my friend.. Just posted up a new series.. 3DOF compact sim for Direct Drive wheels.. Take a look if you have time.. Dave

@6806goats1 Год назад

Very cool. Waiting for my PS5 to arrive, just got the PSVR2 headset and going with the G29 wheel for now. Tonight while looking at reviews I came across this YAW seat and 2 or 3 DOF. It's like this is a great idea, wonder if I can build it myself. Poof, here's D Max (thought Duramax at first) and his own ideas. Now I'm thinking why can't I build my own wheel and stuff? Ok maybe not while I'm working overseas but when I retire in 18 months or so. Party on Garth. Thanks!!!

@DMAX_DIY Год назад

Ok cool I'm have 22 months till retire. Made some videos on how to have fun and connect with the gang if you want. Here's the channel page.. which has all the videos ru-vid.com/show-UCVaC4nPhsTa9BRKjQFhf1kw Here's my Road Rage series where you can ask questions and I try to answer them: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--pFdI5eKO70.html All the best Hope you can watch a few on my site Dave

@gopherchucksgamingnstuff2263 Год назад

I found you through learning how to make the basic motor setup. I am going for a VR superbike. I already have gymnastics pads for my room scale. I broke my foot once and my hand 2 times. I have the Open wheeler frame with G29. It needs motion too. Cool setup

@DMAX_DIY Год назад

Great comment Gopherchucks.. I cant seem to wrap my head around motion for a bike.. Not yet.. So I subscribed to a channel Chris Beeves.. www.youtube.com/@ChrisBeeves he did make a motion simulator for superbikes.. Take a look . Might be helpful.. Dave

@Steve-ou9ed 2 года назад

Brilliant mate

@DMAX_DIY 2 года назад

Thanks my friend! Appreciate you takin a look.. More to come! Dave

@liwarsimracing 3 года назад

when start. I try ask you for advice. see on truck somewhere 😀

@DMAX_DIY 3 года назад

Been working on the series for a little while now should be out soon. DMAX

@Joshua-kr5fq 2 года назад

So cool

@DMAX_DIY 2 года назад

Thanks for taking a look Joshua! I appreciate it! I posted quite a few motion sim build videos - hope they help someone out! DMAX

@Silent_boy23 2 года назад

inspiring!! thanks!!

@DMAX_DIY 2 года назад

Thanks for the comment my friend! DMAX

@thevirtualgamegod 3 года назад

amazing man

@DMAX_DIY 3 года назад

Thanks! I appreciate it! Lots of Lockdown fun waiting to be had.. DMAX

@thevirtualgamegod 3 года назад

I am going to build this too.

@DMAX_DIY 3 года назад

@@thevirtualgamegod It takes a little while to make, but once those motors move you, forget it!! It's ON! and you cant stop having fun! DMAX

@thevirtualgamegod 3 года назад

@@DMAX_DIY whats the motor model ?

@DMAX_DIY 3 года назад

@@thevirtualgamegod 50:1 12volt motors just search Ebay for GEAR MOTOR 12 VOLT GREAT FOR SAWMILL/CRAB POT PULL/FEED/SIMULATOR 75-80RPM 50:1 (sold by PGSAW in Canada) Just put in "GEAR MOTOR 12 VOLT GREAT FOR SAWMILL/CRAB POT PULL/FEED/SIMULATOR 75-80RPM 50:1 " in Ebay. They ship from Canada.. It takes about a week and a half to get them in the USA.. I really like them but if you want more powerful motors, you need to go to Australia... Motion Dynaimics 60:1. DMAX

@S60Team 3 года назад

Hello from far Ukraine! Just saw your video. Awesome job! Definitely will build a copy of your design! PS: I'm making a DIY steering wheel using old pc wheel and changing 2 microcontrollers: Arduino Leonardo and STM32 BluePill right now. 3D printed 8 speed h-shifter. Pedals are still printing. Budget is 40$. Without Force feedback right now.

@DMAX_DIY 3 года назад

Oh that's awesome! Nice! Thanks for the comments my friend! I posted the build on x-simulator.net if you want to check out more www.xsimulator.net/community/threads/full-frame-2-dof-traction-loss-new-build.14740/

@e90julien 2 года назад

hope you are well wherever you are

@DMAX_DIY 2 года назад

I gotta agree with Julien.. I hope your ok my friend.. Dave

@DMAX_DIY 2 года назад

@@e90julien Yeah.. I was just looking and Oh Crap.. He's from Ukraine.. I wrote him .. hope he's ok..

@jumiduss 2 года назад

Absolutely awesome work dude. Looking into building one myself and getting ideas for making the yaw axis so I only need 4 motors instead of 5 on the sfx100. Well shot and made video! Hope you're enjoying it

@DMAX_DIY 2 года назад

Thanks for the comment my friend! Yeah I drive it every chance I get! Traction loss is awesome! Dave

@mirxtremapps 2 года назад

incredible!!... just miss a little of painting

@DMAX_DIY 2 года назад

Thanks my friend! I appreciate it.. Not sure if I am 'finished' with it yet.. so wont paint it till it's in the final iteration. But it's real close!

@kinangeagle133 3 года назад

Dang, i wish i was just enjoying myself one day with a dfgt and next thing I know, im building a motion rig with upgraded sim gear

@DMAX_DIY 3 года назад

Thanks for the comments! Happened to me for sure! Minding my own business then BAM! Into the deep end! Turned out great! DMAX

@rynosraceroom 2 года назад

#DaleYeah 🤘🏻🏁

@DMAX_DIY 2 года назад

Thanks for the comment my friend! DMAX

@AcidMetalGaming 3 года назад

Great vid

@DMAX_DIY 3 года назад

Thanks! Appreciate the Comment! DMAX👽

@RVRCloset 3 года назад

Really awesome work! Great rig build and nice channel!! :D

@DMAX_DIY 3 года назад

Thanks for the comment my friend! This VR stuff is EPIC! Motion? Forget it! Double EPIC! DMAX

@RVRCloset 3 года назад

@@DMAX_DIY Oh yes!! XD

@matthewkane7524 5 месяцев назад

What a cool video! 🙌

@DMAX_DIY 5 месяцев назад

1 more being posted tonight.. should be the best motion simulator tutorial ever made.. I'm uploading it now.. Check it out if you have time.. Dave

@kenco593 2 года назад

Great video

@DMAX_DIY 2 года назад

Thanks Kenneth! I appreciate you taking a look! Check back! DMAX

@wally19 3 года назад

Awesome content. I was into arduino during pandemic too so i know about arduino and bts motor drivers now. But i cant do this on my apartment lol but i will check out your videos anyway. Thx for sharing!

@DMAX_DIY 3 года назад

Thanks Wally19. I will keep posting stuff for sure. Nice to hear someone else with the same idea. Stay tuned for more videos if you can.. DMAX

@FVRFactor 2 года назад

Great vid mate

@DMAX_DIY 2 года назад

Thanks FVRFactor! I appreciate the comment! DMAX

@Thiagoofficial85 Год назад

Absolutely amazing. Nice work done mate!!!!

@DMAX_DIY Год назад

Hello Thiago! Thanks for the comment.. I'm just finishing up a series on 3DOF build compact motion sim.. From 'scratch" check it out and I have a few Simtools Pro licenses to give a way .. so be sure to Check out video 8 and 9 for how to win.. ru-vid.com/group/PLO8l70qEp71MER1P0D-BBZza_gqzzmgp_ Dave

@_spartan11796 2 года назад

Looks awesome! It would be cool to have a similar setup for a flight simulator.

@DMAX_DIY 2 года назад

You bet it would Spartan! I will probably be getting a flight sim game soon to test it out.. I did put in on the rollercoaster tycoon II and in VR, it was EPIC! DMAX

@_spartan11796 2 года назад

@@DMAX_DIY I believe it, best of luck with that!

@Odysseus38 2 года назад

Love the video. I most likely am gonna go break through your videos and try to copy this myself cause id rather build one then buy one haha

@DMAX_DIY 2 года назад

Thanks Isaac Christie. It's been fun.. And it's been working for like 3 years now.. no real issues.. I race it every weekend too! Thanks for the comment! DMAX

@Odysseus38 2 года назад

@@DMAX_DIY awesome so I know its really reliable. Right now i spend a couple hours jimmy rigging my desk with some materials i got from work(construction). So once i make this itll be a lot nicer

@DMAX_DIY 2 года назад

@@Odysseus38 Cool.. I did that too.. with triples on the bench.. Till I got the VR.. then it was game over till I heard about DIY a motion rig.. If you go to xsimulator.net.. there is a ton of guys there building all sorts of rigs. Thats where you get the Plug ins and all that.. It's legit.. No issues - Just guys trying to build stuff for simulators. Hope you take a look. Dave

@Odysseus38 2 года назад

@@DMAX_DIY thats so cool, and this community for sim racing seems amazing so far. Like you dont need to be rich to get into it and its not super snobby either. I love how much diy stuff there is out there to do. I cant wait to do all sorts of Ardiuno stuff with sim racing

@DMAX_DIY 2 года назад

@@Odysseus38 Well you hit the nail on the head .. Yes.. Yes YES.. It's dang cool.. pretty inexpensive.. The arduino makes it pretty easy. and all the programing is already done so Off we go ! Check back my friend! Dave

@TheeDutchRutter 2 года назад

Good shit man!

@DMAX_DIY 2 года назад

Thanks my friend! Yeah it's a blast in VR! DMAX

@RustamSuItanov 3 месяца назад

Fanatec, oh my dream.

@rasiely3733 9 месяцев назад

Nice job

@DMAX_DIY 9 месяцев назад

Appreciate the comment my friend! Just about to post up another video in the COMPACT simulator series.. Working on it this week, should be out in a few days if you have time to take a look.. Dave

@jammy46235 7 месяцев назад

I believe you found a great business build sims on a budget and sell them 👍

@SingleRacerSVR 3 года назад

It looks very interesting D Max, and good luck with dialing it all in to where you feel it is a finished project. It does look simple enough, but you must have a basic understanding still, of general engineering?. Because if you put that "micro controller" in my hands, I wouldn't have a CLUE how to use it, hahahaha

@DMAX_DIY 2 года назад

I'm pretty sure I hit "DELETE" on my Comment Single Racer Instead of "ENTER".. sorry.. I'm replying to you from like 1 year ago.. hahah Dave

@351kostakis 7 месяцев назад

Fantastic

@alejandrosalinas992 Год назад

Great job! Awesome! Thank you so much 🙂👍🏼

@DMAX_DIY Год назад

Thanks for the comment Alejandro.. I appreciate you watching.. Dave

@jarenz3965 Год назад

awesome!!!

@DMAX_DIY Год назад

Thanks my friend!.. Acutally doing a new series right now 3DOF compact motion sim.. I'm working on episode 7 and have 6 of them posted to you tube. It's step by step.. so take a look if you have time! dave

@gopherchucksgamingnstuff2263 Год назад

I have the openwheeler too

@DMAX_DIY Год назад

Thanks for taking a look! Dave

@blacknass1943 2 года назад

very Cool !!!!!

@DMAX_DIY 2 года назад

Thanks my friend! I appreciate the comment.. Keeps me going! Dave

@robvanbreemen6660 2 года назад

Very cool and thanks for sharing. Can you give an estimate on costs related to your 3 dof solution. I am also curious how you created the tension rods that connect to the motors and back of the seat frame. Keep going!

@DMAX_DIY 2 года назад

Thanks for the question and comment Rob.. The tie rods are just 1/2 in conduit.. I bought some left and right hand tie rod ends from amazon and just pushed them into the open conduit.. then tack weled.. Here is a video on the costs.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4cTyjsvO-i8.html

@gnzio3839 2 года назад

Its cool i love it

@DMAX_DIY 2 года назад

Thanks my friend! It so much fun.. I race it every Saturday on line.. It's way cooler than I can describe! DMAX

@travissnider5321 3 года назад

Great video. Really tempted to attempt one myself. How did u like the butt kickers? I think thats my next upgrade atm

@DMAX_DIY 3 года назад

Thanks for the comment Travis. Ok the buttkickers were well worth it! I liked them so much I got two - one for front and one for back. I did a video on setting them up with free simhub software, but they work with other software too. If they are not 'on' it feels like something is wrong with the rig.. Pretty good stuff. DMAX

@drumbri 2 года назад

Great video. Thank you for your time and talent. What is the game are you playing in VR? 6:44 on your video, I don’t recognize that game for VR.

@DMAX_DIY 2 года назад

Hello Donkey Dem.. Appreciate the comment for sure.. Sometimes YT does not notify me if someone comments, which kinda sucks so sorry about that.. Yeah The game Is Assetto corsa. The games that the motion rig can support are here on this link so If you want to build one of these things, there is a pretty good community around it.. www.xsimulator.net/community/threads/full-frame-2-dof-traction-loss-new-build.14740/ Check back in if you have time.. I'm trying to post something cool once a week. Dave

@KlauV 7 месяцев назад

That’s awesome!! I didn’t know I neeed to make one until you showed up on my feed 😂 I can figure out the building part, but what software do I need make it go live?

@DMAX_DIY 7 месяцев назад

Thanks for watching my friend! Ok.. so I have several series on these different rigs from a-z and in each series I try and go over the SMC3 software and Simtools.. Those are what make the motors and your rig move with the game telemetry.. I'm going to do another video on them in the latest series, I just have not got there yet.. But for now.. Here a link to a Specific video. Using 24 volt motors but it's the same with 12 volt motors.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KrTEpgaQViQ.html

@KlauV 7 месяцев назад

@@DMAX_DIY thank you so much! I can’t wait to watch all that. 🍻

@swashna1646 2 года назад

Thanks alot i apriciate your work.what else potentiameter can i use instead of 6127V1A180L.5FS

@DMAX_DIY 2 года назад

Hi, I was going to use 10K wirewound pots (that's the end game) hall effect are just better and infinitely spin. I would still order the 987-1392-ND part from DIGIKEY. If shipping is the issue, just search google for similar SENSOR ROTARY 180DEG SLDR TURRET.. hope that helps

@ji3200 3 года назад

Hi brother, can RSRBR 2021 or any of the previous version works with Simtools or SimRacing Studio software for motion simulator?

@DMAX_DIY 3 года назад

Here is the link - just scroll down about half way on this page and it lists all the game plugins available with Simtools.. I am only using Assetto Corsa and Rollercoaster sim so far but they have like 60 game plugins.. www.xsimulator.net/simtools-motion-simulator-software/#plugins

@michelevitarelli 3 года назад

Great project. Thanks for sharing. How much do you think all the motion sim parts were?

@DMAX_DIY 3 года назад

Thanks for the comment Michele! I did a video a little while ago which shows the rundown on the parts bill.. Check this one out if you have time DMAX ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4cTyjsvO-i8.html also a link to all the videos on the channel here ..ru-vid.com/show-UCVaC4nPhsTa9BRKjQFhf1kw

@fernandoblackman760 7 месяцев назад

Hi I have a sim rig I did it my self I need help adding motion to it but I has a ps5 yours is pefect

@bigsteve6729 3 года назад

Cool video Dave, I will check the rest of them out to see how you solved certain problems. Do you suggest any helpful forums for a build? Do you have any detailed schematics for your Arduino wiring? Can it interface with any racing/sim game or just a special game MADE for simtools software? Have you thought about getting the actual dash from a car you love? You can easily connect this up to an Arduino and use the CANBUS network to power and rev the gauges - it's what I'll do if I ever get close the finishing a build, but would look really cool for you to add. If you give it a search you'll find the libraries and guides of how to do it. Sorry about the question overload, I feel like this will be my next project :) I am also thinking about maybe a removable dash bit, where one could be a car and another a jet that you could just swap - as I love the flight sims to, how practical do you think this could be ? Perhaps 6dof needed for a jet setup?

@bigsteve6729 3 года назад

Sorry I lost your heart like Dave I edited the comment a little 😁

@DMAX_DIY 3 года назад

Hi Big Steve, Great questions. Yep I used the xsimulator.net forum for pretty much all you were asking. here is a link to the schematic page www.xsimulator.net/community/threads/smc3-arduino-3dof-motor-driver-and-windows-utilities.4957/ here is a link to my build on x-simulator.net www.xsimulator.net/community/threads/full-frame-2-dof-traction-loss-new-build.14740/ That should get you heading in the right direction. I'm using VR so I always have the correct dash for whatever car I am driving.. VR is great and was a game changer for me. I'm looking into building a 6 DOF maybe this winter.. Thanks again for the questions.. DMAX

@bigsteve6729 3 года назад

@@DMAX_DIY thanks a lot Dave you've saved me a long search. Very cool stuff. Would you say VR is way better experience for the racing Sims? How about motion sickness? Is it lessened because you're actually moving because I've had some sickening times on some of those vr games! 😂 For the reasons above I am wary of the VR and you also are lacking peripheral without looking. What do you think about the feasiblity of a 180 degree curved projector panel that's attached to the frame and moves with it. There is a projector project like this on RU-vid but not incorporating any dof, seems an interesting challenge And finally, if you could do this build different what would you change about it if you were to do it again. Thanks for your time and sharing your knowledge. Steve, UK

@DMAX_DIY 2 года назад

@@bigsteve6729 Ok Big Steve, Apparently YT never notified me you commented.. But Yes I had a single monitor stationary. then I hooked it to the rig. Stationary hooked to the motion was WAY better. Then I tried Triple monitors I think they were like 24".. It was EPIC.. but I already had Oculus Rift CV1 and was a bit scared to try it.. I manned up and hooked it up. HOLY CRAP!! Way better than triples with the motion.. I don't get motion sick easily and you might find me 'surfing' and all diving in the ocean or whatever. But I would suggest if you have a 1080 card and at least an I7 with 32GB ram, VR should be fine.. Go all in.. my motto is 'if it's worth doing.. it's worth OVER doing' .. All the best my friend ! DMAX

@aag6245 Год назад

Of all the motion simulator videos out there only you were sharing actual valuable information in detail to actually DIY the rig...

@DMAX_DIY Год назад

Very nice comment AAG!.. Hope you can take a look at some of the newer series.. very step by step.. compact motion sim series.. ru-vid.com/group/PLO8l70qEp71MER1P0D-BBZza_gqzzmgp_

@davidklein478 3 года назад

Hi Dave, first of all I have to say I think it's terrific what you've created. I am totally enthusiastic and would like to build myself such a motion simulator. The first question I have is, how did you determine the dimensions of your rig? Did you take a template from the web? Or what are the dimensions of your rig? Before I buy the necessary square tubes, I should know what quantity I need. To the square tubes still the question, what thickness do they have? I would have taken tubes with 1.5748" x 1.5748" for the main frame and 1.1811" x 1.1811" for the seat construction, each with a thickness of 0.12". Sorry, in Germany we have other size specifications and I have now simply converted them via Google. Greetz David

@DMAX_DIY 3 года назад

So I posted most of the build here and a few pages in someone asked me for the measurments so I added a bunch of photos for that..www.xsimulator.net/community/threads/full-frame-2-dof-traction-loss-new-build.14740/

@DMAX_DIY 3 года назад

Hey David, Going to make a 3 part series on building a seat mover.. Starting this weekend my friend! Take a look if you get a chance! DMax

@alexanderdias2499 2 года назад

I've been looking at buying a motion rig myself. I built my current rig out of wood and it's been great, but I want to step it up to motion. Your video has inspired me. I going to look into building my own. How much time and money did this project cost?

@alexanderdias2499 2 года назад

lol, I just found your other video on how much it cost.

@DMAX_DIY 2 года назад

@@alexanderdias2499 Well pretty much.. I had to get some 'tools' to make it easier on me..