Тёмный

How to Build a Shed (12x12) with a Loft! 

Ryan Rutter
Подписаться 12 тыс.
Просмотров 731 тыс.
50% 1

If you are like most people, you have a garage full of stuff and no place for your cars. Rather than buying a new home with more space for storage, it might be an easier fix to build a shed for your excess storage needs. This shed was the maximum square footage that my neighborhood would allow, which was a 12x12 or 144 square feet shed, but I was able to add the loft to give me a little more storage space. There are simpler roof styles, such as a single pitch "lean-to" style roof, but I wanted the loft for extra storage, which is why I decided to use gable ends. I also wanted a large door opening for larger equipment such as a 60" cut mower, so I made the opening 64" wide. The window, I found in someone's trash, which was a great add for this build! Windows add natural light, especially if you don't have power running to your shed. I was SUPER PLEASED with the MINIMAL WASTE of materials for this build. I could literally fit all the waste in one trashcan. Whatever material you use for the roofing and siding, make sure to look up the manufacturer installation instructions so that it is done properly, which can be found on the product website. If you have any questions, feel free to comment below. I hope that this is helpful information for everyone! Peace and God bless!
For those looking for a material list, this is the bulk of what we used when building the shed (below). All the materials cost less than $2990!
Foundation
2 4x4x12 Treated
3 Rock Bags
4 Deck Block
1 1 1/2 Hanger Nails
20 Hurrican Ties
16 2x6 Hangers
5 Floor Ply
4 2x6x12 treated
8 2x6x12
2 3" Hanger Nails
Walls, Doors, and Loft
72 2x4x8
15 2x4x12
14 Smart Siding
3 Multiuse Soffit
1 2" 5lb Screws
19 1x4x8 treated
3 z flashing
2 vents
4 Hinges
1 Foot Bolt
1 Lock Latch
1 2 3/8" Wall Nails
1 3x3' Window (FREE)
Roof, Fascia, and Soffit
14 2x4x8
16 1x4x8 treated furring strips
1 2x6x16
20 2x4 Joist Hangers
4 1x6x10 Treated
3 1x6x12 Treated
2 rdg cap
10 3x8 mtl roof
7 drp edge
4 Screw bags
6 Caulk
20 Hurr Ties
Ramp
4 12ft Decking
1 2x6x12 treated
3 2x6 joist hangers
Paint
2 Gal Color
1 Gal Trm

Опубликовано:

 

27 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 623   
@Bowhuntertexas
@Bowhuntertexas 10 месяцев назад
It’s ridiculous how patient and talented some people are. I’m jealous that I have neither of those traits. Enjoyed watching. 👍
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
🤣 Your name is @bowhuntertexas… I know you have to have some patience if you are a bow hunter!😁
@chinmeysway
@chinmeysway 9 месяцев назад
I believe it’s fromhard work / tons of practice. Talent is not a real thing exactly, the tying and doing is way more real a thing!
@eduardochavacano
@eduardochavacano 9 месяцев назад
@@chinmeysway he is also handsome, that is talent.
@sabaa6282
@sabaa6282 9 месяцев назад
The more you do you understand that it takes time and you have better patience.
@goodluck
@goodluck 7 месяцев назад
I'm more jealous of how easy his soil is to dig. I can use thors hammer to drive my shovel into my soil and not even a speak of dirt will leave. we haven't seen rain in like 6 months down in louisiana lol
@Stinkepete1985
@Stinkepete1985 Месяц назад
This is exactly the size and very close to the design I want to build. Hands down the best build guide I have ever watched. Thank you!
@rutterrealtygc
@rutterrealtygc Месяц назад
Awesome! Glad it helped!
@macabrerapkz
@macabrerapkz 5 месяцев назад
There are many videos like this one, but the verbal descriptions and lifehacks are superb - I especially liked the one about squaring the walls, never heard of such a method before on YT.
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Glad it helped!😊👍
@billybristol6013
@billybristol6013 5 месяцев назад
Thank you for the video. Where I live in North Carolina, a 12 x 12 shed is the largest size allowable without having to get a permit, so this is the perfect size for my needs.
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Awesome! Best of luck with your project!
@familyfam4115
@familyfam4115 3 месяца назад
Hey I live in NC and I'm going to build a shed but a lean to.
@pookycdm
@pookycdm 2 месяца назад
Could you get away with having two sheds instead of just one.? Or is there a limit?
@richyrich4672
@richyrich4672 6 месяцев назад
Nice job. The term used to level up the walls is called plumb. Plumb is vertical. Level is horizontal. Enjoy your shed you did a nice job on it.
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Thanks!
@TamaraGrace
@TamaraGrace 4 месяца назад
That was a real good video. Your supplies list in the description was laid out in a way that I could understand it. Thanks for putting your time into making this! 🎉
@rutterrealtygc
@rutterrealtygc 4 месяца назад
You’re welcome! Glad it was helpful!😁
@SeekandYouWillFind
@SeekandYouWillFind 12 дней назад
Marvelous approach with great detail.. Thanks!
@rutterrealtygc
@rutterrealtygc 10 дней назад
Thanks!
@OreoTime1
@OreoTime1 8 месяцев назад
WOW!!! What a marvelous job you did! The shed came out BEAUTIFUL! Thanks for the share. Cheers!
@rutterrealtygc
@rutterrealtygc 8 месяцев назад
Thank for the comment!👍😊
@OreoTime1
@OreoTime1 8 месяцев назад
@@rutterrealtygc, welcome!
@bluevireo425
@bluevireo425 7 месяцев назад
So glad for this video, you have no idea who you are helping. For example in my case an old lady trying to build an Art Room by myself. Thank you !
@rutterrealtygc
@rutterrealtygc 7 месяцев назад
Awesome! Best of luck with your project!
@user-mp6id7in7v
@user-mp6id7in7v 5 месяцев назад
I own a few companies and one is a Fencing and shed building co. Here in TX the ciry only requires code or permits if a Shed/Loft is over 300sq feet. So usually theres no permits needed but, we always do our jobs as if it would. This video you shared it a pretty good walk through and work 👍
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Thanks for the positive comment and information! :)
@akzorz9197
@akzorz9197 9 месяцев назад
You killed it! This turned out awesome. Thanks so much for sharing.
@rutterrealtygc
@rutterrealtygc 9 месяцев назад
Thank you for the comment!😊
@ittybittytractorworks
@ittybittytractorworks 10 месяцев назад
Thank you so much for sharing this. I am planning to build a new chicken coop and a run and had a pretty good plan. After watching your video I realized a few ways to save money, time and build overall better chicken run than what I originally planned.
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Awesome! Glad it helped!! Best of luck!!👍😊
@markirish7599
@markirish7599 Месяц назад
Beautiful craftsmanship
@rutterrealtygc
@rutterrealtygc Месяц назад
Thanks for the comment!😊👍
@WhiteTrashNobodies
@WhiteTrashNobodies 9 месяцев назад
Pretty work. This is the exact style she'd I was looking for.
@rutterrealtygc
@rutterrealtygc 9 месяцев назад
Awesome! 👍😊
@SouthwestStet
@SouthwestStet 6 месяцев назад
Really great video, thank you for sharing. Just bought a property and planning to put a shed on it to store all the tools and materials for the long list of projects on the land.
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Awesome! Best of luck with your project!😊👍
@eveb3749
@eveb3749 7 месяцев назад
This is a great video. The instructions are very detailed and easy to understand. Thank you very much.
@rutterrealtygc
@rutterrealtygc 7 месяцев назад
Awesome! Thanks for the comment!😊👍
@pmacc3557
@pmacc3557 8 дней назад
Great job. I seen another guy on YT driving re-bar thrythe wood joists foundation into the ground
@rutterrealtygc
@rutterrealtygc 7 дней назад
Nice!👍
@rafaelc4488
@rafaelc4488 6 месяцев назад
Good job 👍🏽 You have a good way of explaining things . Where others just play annoying heavy metal music on the background. You got your self a like 👍🏽 sir The building came out pretty cool
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Thank you for the comment and like!👍😊
@rideordiechickdietoride4557
@rideordiechickdietoride4557 4 месяца назад
New SUB. this is the best shed build video I have seen. Thank you.
@rutterrealtygc
@rutterrealtygc 4 месяца назад
Awesome! Thanks for the comment!
@franknoblitt6265
@franknoblitt6265 6 месяцев назад
Nice looking shed. Enjoyed watching your build.
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Thank you! I appreciate the comment!👍😊
@Silkk32483
@Silkk32483 6 месяцев назад
The shed turned out very nice! I will hopefully start a project like this in the upcoming year.
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Best of luck!!
@dyerivlogtv3193
@dyerivlogtv3193 10 месяцев назад
Great....thanks for sharing..watching from Philippines
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thanks for the comment!👍😁
@Mikelarson6112
@Mikelarson6112 7 месяцев назад
He made this look so easy.
@rutterrealtygc
@rutterrealtygc 7 месяцев назад
Thank you for the comment!😊👍
@Hymerati
@Hymerati 2 месяца назад
That was amazing. I'm about to embark on building a 10ft x 8ft shed but nothing as beasty as that one.
@rutterrealtygc
@rutterrealtygc Месяц назад
Awesome! Best of luck!!
@Njao6q4vrv73
@Njao6q4vrv73 10 месяцев назад
I wish I saw your video before making my own. Great build great video
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thanks! I hope yours turned out great!
@simsmr691
@simsmr691 7 месяцев назад
Great job, thanks for sharing your knowledge.
@rutterrealtygc
@rutterrealtygc 7 месяцев назад
Glad it was helpful! 👍😀
@brandonsamson6278
@brandonsamson6278 5 месяцев назад
Great video and thanks for covering the finer details!
@rutterrealtygc
@rutterrealtygc 4 месяца назад
Glad it helped!!
@maryj4535
@maryj4535 8 месяцев назад
Beautiful trees around you
@rutterrealtygc
@rutterrealtygc 7 месяцев назад
Truly!
@chuckybob1984
@chuckybob1984 10 месяцев назад
Great effort and build! Satisfying experience watching and listening while you narrate and demonstrate!
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thanks @chuckybob130!👍😊
@alan_leblanc
@alan_leblanc 6 месяцев назад
This was really helpful. Thanks for being so detailed
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
You’re welcome!!👍😊
10 месяцев назад
Thanks for your sharing, at least you found a good use place for a windows that someone recycled year ago :)
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thank you!😊 I was excited to use it!😁
@robertander1386
@robertander1386 7 месяцев назад
You did a good job man! Congrats!! 👍
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Thanks for the comment!👍😊
@idlesquirrel
@idlesquirrel 6 месяцев назад
Great job. Looks amazing!
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Thank you!👍😊 Thanks for the comment!
@sdcaeastcountyfamily
@sdcaeastcountyfamily 8 месяцев назад
Nicely done. Thank you
@rutterrealtygc
@rutterrealtygc 8 месяцев назад
Thank you for the comment!😊👍
@ventman929
@ventman929 10 месяцев назад
The build of that shed looks like it will survive a nuclear blast...good work😊
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thanks!😁👍
@carstx
@carstx 2 месяца назад
Nice build. Thanks for posting/sharing. It's a very informative video.
@rutterrealtygc
@rutterrealtygc 2 месяца назад
You’re welcome! 😊👍
@MM-overtime
@MM-overtime 6 месяцев назад
Good video! I saved it and im going to attempt it this spring. Thank you!
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Thanks for the comment and best of luck!!😊
@user-qr7ee2cp4y
@user-qr7ee2cp4y 5 месяцев назад
Great size for a shed
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Thanks!
@jimdenis8611
@jimdenis8611 11 месяцев назад
Hey there cuz! I’m impressed with your expertise! 😊
@rutterrealtygc
@rutterrealtygc 11 месяцев назад
😊👍
@DestroyerFather
@DestroyerFather 10 месяцев назад
Amazing Build. 👍👍❤❤
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thank you! :)
@russbowerschannel449
@russbowerschannel449 Месяц назад
It came out great.
@rutterrealtygc
@rutterrealtygc Месяц назад
Thanks! Not sure if you’re saying yours did or my did…😂👍
@ashleybrewer750
@ashleybrewer750 10 месяцев назад
Awesome job man
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thanks! 😊👍
@buynsell365
@buynsell365 7 месяцев назад
EXCELLENT VIDEO !!! I have found myself coming back to this one multiple times........exactly what I needed to know. Hopefully will start on my shed soon.
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Awesome! Best of luck!!
@wilsonmaingrette715
@wilsonmaingrette715 4 месяца назад
Thats one neat shed
@rutterrealtygc
@rutterrealtygc 4 месяца назад
Thanks!😊👍
@offtherocksfishing_officia974
@offtherocksfishing_officia974 4 месяца назад
Thank you for sharing and inspiring
@rutterrealtygc
@rutterrealtygc 4 месяца назад
Thanks for the comment!👍😊
@lahopkins9746
@lahopkins9746 11 месяцев назад
Looks great!
@rutterrealtygc
@rutterrealtygc 11 месяцев назад
Thank you!😊👍
@HabeebAlasadi
@HabeebAlasadi 6 месяцев назад
Thanks for the instruction
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Best of luck on your project!
@orlandotejeda3265
@orlandotejeda3265 14 дней назад
Great job, I love it.
@rutterrealtygc
@rutterrealtygc 14 дней назад
Thanks!👍😊
@soniarosado5971
@soniarosado5971 4 месяца назад
Great Ideas to build a shed
@rutterrealtygc
@rutterrealtygc 4 месяца назад
Thanks for the comment!👍😊
@lpc5152
@lpc5152 10 месяцев назад
Nice build
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thank you!😊
@c.torino2479
@c.torino2479 6 месяцев назад
Nice build man. Good info too!
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Thank you! I appreciate the comment!😊
@TunafishSmoothie
@TunafishSmoothie 5 месяцев назад
When I have built shed doors, similar to what you have done, I either ripped 2x4 in two pieces (giving a depth of a bit less than 1 3/4", about the same as a your half lap), or used 2x3 (2.5"), which gives a bit more thickness. The outside skin gives all the strength you need. On the inside, especially when using 2x3, I add 3/4" furring with either pegboard or 1/4" ply on the inside. It gives a bit more storage for small items.
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Nice!
@johnjaso1349
@johnjaso1349 10 месяцев назад
thank you. great job.
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thank you!😊👍
@gregmize01
@gregmize01 10 месяцев назад
Great job! Thanks!
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thank you for the comment!! :)
@The.End.Begins24
@The.End.Begins24 5 месяцев назад
This was very helpful. Thanks ❤
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Glad it helped!😊👍
@Casmige
@Casmige 10 месяцев назад
On the build? Don’t forget about “crowning” on the floor joists & wall studs. I also would’ve: * Pre-treated-&-sprayed the ground area location for Termites. * Installed floor joist hangers, not just hurricane tie-ins. * MEMBRANE’D the Pressure-treated floor frame & floor joists prior to plywood decking it. * Treated the cut-end of the floor-joists with Cut-N-Seal. * Tyvak wrapped wall stud frame before the siding. NOTE: That OSB Siding will swell WHEN (it’s never a question of “IF”) it gets wet & “wicks” moisture so sealing those ends are important. * Zip-system taped around the doors/windows & silicone BEHIND not just around the perimeter (Nice score on the jealousie window btw) * Z-Flashing above Windows/Doors. * Maybe R-Gard’ed the 😮perimeter of the window openings & roof vents. * R-Gard’ed the plywood floor (prior to setting the walls). * Primed/Epoxy/Vinyl-Flake/-& Aspartic sealed the floor & sill-plate perimeter. Just FYI? On any proposed gutter & down-spouts? The code usually is a minimum 10’ conducted away from the foundation.
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
All great tips! Thanks! Possibly on the gutters! I still haven’t decided.😊👍
@zpoedog
@zpoedog 11 месяцев назад
Well done!
@rutterrealtygc
@rutterrealtygc 11 месяцев назад
Thank you!👍😊
@cliffanderson7544
@cliffanderson7544 10 месяцев назад
Nice build!
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thanks!
@AlienRestoMod
@AlienRestoMod 10 месяцев назад
Very nice job.
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thank you!👍😊
@David-pp9fk
@David-pp9fk 4 месяца назад
Nice work.
@rutterrealtygc
@rutterrealtygc 4 месяца назад
Thanks! I hope it was helpful!
@rrain3375
@rrain3375 4 месяца назад
From Toronto Canada we don’t get hurricanes. But, some winters we get large dumps of snow that can cause damage. The worst was in 1944 that had 40” of snow in 24hr. Then we had the devastating ice storm in 2013.
@rutterrealtygc
@rutterrealtygc 4 месяца назад
😬 Definitely don’t have that in southeast United States!😆
@ShadowMoonFarms
@ShadowMoonFarms 10 месяцев назад
Thanks for sharing
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thank you for the comment!👍😊
@jcpad1797
@jcpad1797 10 месяцев назад
Great job , great video
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thanks for the comment!👍😊
@CFHorne
@CFHorne 4 месяца назад
Great video. Thank you !!
@rutterrealtygc
@rutterrealtygc 4 месяца назад
Thanks! Glad you liked it!😊👍
@ben81
@ben81 8 месяцев назад
Good job 👍🏻✅
@rutterrealtygc
@rutterrealtygc 7 месяцев назад
Thank you!👍😊
@rockod8880
@rockod8880 8 месяцев назад
Great video thank you
@rutterrealtygc
@rutterrealtygc 8 месяцев назад
Thank for the comment!👍😊
@ellas88
@ellas88 24 дня назад
Great explanation men good jod
@rutterrealtygc
@rutterrealtygc 21 день назад
Thanks!
@corinneyeager
@corinneyeager 5 месяцев назад
ABSOLUTLY THE B E S T SMALLBUILD VID IVE SEEN .... And you didn't show how EACH nail went in. PLUS a good parts list ❤❤
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Thanks for the comment! Best of luck with your project!😊
@kitkimbrough1145
@kitkimbrough1145 3 месяца назад
Nice job!!..One thing I noticed, the traditional latch that covers the mounting screws too prevent unfortunate break ins doesn't prevent removing the screws and hinges thus not securing it from idiots!!!...But thankyou for this video!!!
@rutterrealtygc
@rutterrealtygc 3 месяца назад
It’s true! I should have put the hinges inside!👍😁
@randyhickman604
@randyhickman604 9 месяцев назад
Great job! Going to be building a shed of my own soon, thanks for the info!
@rutterrealtygc
@rutterrealtygc 9 месяцев назад
Awesome! Best of luck!👍😊
@mariepaul733
@mariepaul733 9 месяцев назад
Very helpful
@rutterrealtygc
@rutterrealtygc 9 месяцев назад
Glad it helped!👍
@jaredstanfield267
@jaredstanfield267 4 месяца назад
Excellent video! I went into the video considering building my own shed. After this video, I am certain that I will not be doing that and will buy a premade shed.
@rutterrealtygc
@rutterrealtygc 4 месяца назад
😆 Glad it was helpful for your discernment process!😁
@TheSocialPraxis
@TheSocialPraxis 4 месяца назад
Great video man 👍🏼
@rutterrealtygc
@rutterrealtygc 4 месяца назад
Thanks for the comment!👍😁
@lukefitt56
@lukefitt56 7 месяцев назад
Very informative and it looks like it turned good! Thanks for taking the time to film and explain all of it
@rutterrealtygc
@rutterrealtygc 6 месяцев назад
Thanks for the comment!😊👍
@timothyn4699
@timothyn4699 7 месяцев назад
jealous of your skills. Someday it would be fun to try this, but I'm a noob at handyman skills /craft
@rutterrealtygc
@rutterrealtygc 7 месяцев назад
One step at a time.😊 It’s fun to grow your skill set!
@angetodac
@angetodac 5 месяцев назад
U great. Not fast. Just perfect.
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Thanks for the comment!
@harryshaw4998
@harryshaw4998 Месяц назад
you can paint the trim around the doors and windows with a contrasting color of your choosing to enhance the beauty of the shed. I did that. I used paint from Home Depot that someone ordered and didn't want it and the cost of the paint was almost 75% off.
@rutterrealtygc
@rutterrealtygc Месяц назад
Awesome!Good idea!
@harryshaw4998
@harryshaw4998 Месяц назад
@@rutterrealtygc post the results
@Timnguyen819
@Timnguyen819 5 месяцев назад
Going fast like king of the hill intro 😂
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
😆
@aaronjaben7913
@aaronjaben7913 10 месяцев назад
excellent
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thank you for the comment!👍😊
@KJ110813
@KJ110813 8 месяцев назад
Tip: before installing joists, pull layout on one of the rim joists, then line it up with the other rim joist, clamp them together, then transfer your layout marks to the other rim joist with a speed square. MAKE SURE to mark each rim joist so you know which way they go and don't get one turned around. Also, check crown on joists and install with crown up
@rutterrealtygc
@rutterrealtygc 8 месяцев назад
So many ways to do it!👍😊
@Moyocross215
@Moyocross215 10 месяцев назад
Dude, not only do we both love building sheds, but we have the same last name ! Haha
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
😆 Awesome! I wonder if we are related somehow?🤷‍♂️😆
@newfiemurphy7140
@newfiemurphy7140 9 месяцев назад
Excellent Job.
@rutterrealtygc
@rutterrealtygc 9 месяцев назад
Thank you! :)
@JessicaSimonson1976
@JessicaSimonson1976 8 месяцев назад
We always anchored huricane clips and braces on inside and we used them between sheets of plywood on roof H shaped clips.
@rutterrealtygc
@rutterrealtygc 8 месяцев назад
Yeah, inside is where the majority of mine are.
@prasanthr9214
@prasanthr9214 9 месяцев назад
Awesome 👍
@rutterrealtygc
@rutterrealtygc 9 месяцев назад
Thanks for the comment!👍😊
@sevencrickets9258
@sevencrickets9258 4 месяца назад
For those confused, the door he did wrong is the one that is right. For the door diagonal, you want it going from the top hinge to the bottom unsorted. This puts the diagonal member in tension which is preferred to compression.
@rutterrealtygc
@rutterrealtygc 4 месяца назад
I’m going to have to disagree with you on this one…
@sevencrickets9258
@sevencrickets9258 4 месяца назад
@@rutterrealtygc Your welcome to be wrong. Very often, the diagonal member that keeps a door square is a cable. Can't put a cable in compression. Wood, like most materials, is substantially stronger in tension than compression. This is not up for debate. It's a simple engineering principle.
@sevencrickets9258
@sevencrickets9258 4 месяца назад
@@rutterrealtygc To be fair, if you are not fastening the diagonal member in any way, you are correct, it has to be compression to keep the door square.
@Burritosarebetterthantacos
@Burritosarebetterthantacos 4 месяца назад
This is a basic concept. Funny how youtube has watered down carpentry.
@manuelpiston
@manuelpiston 4 месяца назад
​@@sevencrickets9258 lol he is wrong and he knows it. That is why he hasn't replied.
@PHOTOCONVENTION
@PHOTOCONVENTION 3 месяца назад
Your neighbours have beautiful trees.
@rutterrealtygc
@rutterrealtygc 3 месяца назад
Truly!😁
@josephcwallace
@josephcwallace 10 месяцев назад
Very enjoyable watching the shed come together. I was curious, though; what was the software used to make your simple plan? Also, I was a little concerned about the weight of the shed and its contents on those 2 4x4 skids. Perhaps out of paranoia I would have added at least 2 more skids at the outsides.
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
I didn’t use any software to make the plan… I just drew it out with a ruler and a pencil. :-) Also, feel free to add more 4 x 4 skids in your design, but I chose to only two because I believed it met the load standards and it would be easier to transport on a 8 foot wide flatbed trailer in the event we move the shed. From my experience, if you go to purchase any 12 x 12 shed, the majority (if not all) of them are on two 4 x 4 skids. Though, that’s the benefit of doing it yourself, so feel free to add more support!😊👍
@velocityacoustics
@velocityacoustics 6 месяцев назад
The sheds in these shed videos are are looking more like small houses than sheds! 😁
@rutterrealtygc
@rutterrealtygc 5 месяцев назад
Much of it is the same process.😊👍
@user-rj4un5rc7k
@user-rj4un5rc7k 9 месяцев назад
Amazing
@rutterrealtygc
@rutterrealtygc 9 месяцев назад
Thank you! :)
@steve_dren
@steve_dren 10 месяцев назад
Ryan, dope video. Thanks for making this. I’m working on a shed and very new to diy. Deff bit off more than I knew how to do but it’s coming together. @17:54 you mentioned not measuring 16 OC. I knew I had to do that but somehow messed up too and was looking for fixes. I’ll do what you did. Thanks man.
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Yeah, I just attached a 2x4 block to the vertical supports that were on the gable ends and the block was enough to reach the seam where the two pieces of siding meet up. You can see it in the video right after 17:54.👍😊 Everything else was 16” on center though.
@jamesdeluca6657
@jamesdeluca6657 Месяц назад
It's not called level ,vertical is called plumb
@rutterrealtygc
@rutterrealtygc Месяц назад
👍
@S1L3NTG4M3R
@S1L3NTG4M3R 3 месяца назад
W0W... 👍 thanks again!! :)
@rutterrealtygc
@rutterrealtygc 3 месяца назад
Absolutely! You’re welcome!
@breezybre2670
@breezybre2670 8 месяцев назад
Dang is that nice!!!!
@rutterrealtygc
@rutterrealtygc 8 месяцев назад
Thanks for the comment!😊
@pjsmith6954
@pjsmith6954 9 месяцев назад
this was a really excellent video! Just filming the thing must have doubled the build time.
@rutterrealtygc
@rutterrealtygc 8 месяцев назад
It wasn’t that bad actually!👍😊
@MyCapeBretonRetiredLife
@MyCapeBretonRetiredLife 3 месяца назад
Walls should have been 2x6 and roof rafters should have been at least 2x8 but besides that nice job. I can't believe how many you tubers under build. The walls and rafters don't have any blocking!
@rutterrealtygc
@rutterrealtygc 3 месяца назад
I checked the engineering specs for weight load in my area (no snow) and that is what I built it to👍
@ricardoguerra9693
@ricardoguerra9693 8 месяцев назад
Thinking of building our own shed here at our new place. Seems like the way to go honestly if you have the means.
@rutterrealtygc
@rutterrealtygc 8 месяцев назад
You can definitely save some $$ doing it yourself.
@anthonyhalderman9624
@anthonyhalderman9624 10 месяцев назад
You gable vent looks more like a foundation vent. Good work BTW!
@rutterrealtygc
@rutterrealtygc 10 месяцев назад
Thanks!👍😊
@john_thorpe
@john_thorpe 9 месяцев назад
Found it funny that you put on a locking latch that covers the screws but have the hinges screwed on the outside. The type of hinges I'd use would be the ones with a square peg type of insert and a round head (aka carriage bolt) ... this way the square part under the bolt head locks into the hinge and goes through to the inside where it's bolted, thus making it almost impossible to remove the screws/bolts on the hinges to gain entry to the shed ... also need to make sure the hinges don't have a pin that can be removed. I'd also probably do at least a small waist high (or a little higher) work bench area, and a board across 3 or 4 wall beams to be able to screw in some utility hooks to hang up a trimmer, etc. ... or even a rail system.
@rutterrealtygc
@rutterrealtygc 9 месяцев назад
Yeah, all of those videos to come in the future. You're right on the hinges! :) I do have a really nice collapsible workbench video that I put in my garage if you want to check it out. It is a good way to conserve space! :)
@Shykiddoable
@Shykiddoable 4 месяца назад
I built a shed similar to this and yours came out awesome, my only thing is you purchased a latch which can’t be removed but yet your hinges can, unless you used rounded head bolts, I couldn’t see from the position of the camera, otherwise great build.
@rutterrealtygc
@rutterrealtygc 4 месяца назад
You’re right… I should have concealed the hinges.😆 Glad it turned out great!👍😊
@toddbellows5282
@toddbellows5282 2 месяца назад
Looks nice but how many varmints will take up residence underneath?
@rutterrealtygc
@rutterrealtygc 2 месяца назад
It’s been a year… so far zero.👍😊
Далее
How I Built A DIY Tiny Home Gym Full Build
47:56
Просмотров 1,3 млн
Building a 12x24 Shed - FULL BUILD
48:10
Просмотров 114 тыс.
ДОБРО ПОЖАЛОВАТЬ В СЕМЬЮ♥️
42:55
is it CHEAPER to buy a SHED or to take the DIY route?
7:26
How to Build a Shed (Start to Finish)
26:41
Просмотров 142 тыс.
I think I accidentally built a tiny house.
19:32
Просмотров 1,3 млн
Building a Storage Shed  ......    start to finish
17:54
Просмотров 1,8 млн
How to Build a SHED from Start to Finish!!
23:00
Просмотров 4,2 млн
Roofing a Lean-To Shed
29:48
Просмотров 169 тыс.