How To Build A Street Luge Part 1 Intro & Materials

Подписаться 110

Просмотров 21 тыс.

50% 1

First part in a series of videos explaining how to build a drop-rail street luge out of wood. I try to be as clear as possible and explain it so everyone can understand it and build themselves a nice luge. Sorry its boring! I just wanted to be as clear as possible to avoid any confusion. Part-2 will be up soon. Comment if you have questions or concerns. Thanks! Like the video if you plan on building one!

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@zdunlap22 11 лет назад

Don't use those because they are very large and they are hard. The harder and smaller they are the hotter they get...higher RPM the smaller the wheel. They WILL MELT if they are too small. Go for larger, softer longboard-ish wheels.

@zdunlap22 13 лет назад

@BlueTiger368 hey there sorry its taken a while to get back to you. Try to find large longboard wheels i wouldnt go much smaller than 77mm (bigger is better) and make sure they have a low durometer (hardness rating) im currently using ones that are 78a i wouldnt go past 85 on the high side though.

@mozzmann 10 лет назад

In reality you are far safer to use Alloy Box section, and either drilled and tapped or TIG Welded, IMHO a drop rail from timber will simply not handle the potential stresses at the drop point unless carriage bolted all the way through with reinforcing plates both sides ( Like a Gang Nail ) to give structure to the joint in a similar fashion to the way Timber Spar's were laminated for Aircraft.

@jpetersen92020 12 лет назад

@ThePaalanBoy Aluminium is the metal. Find some 6061T6 aluminium and it will work way better.

@OrganicFries 11 лет назад

Okay, thanks.

@jpetersen92020 12 лет назад

@zdunlap22 Even 78a durometer is hard......Look at Abec 11 wheels.....Super soft and big....

@OrganicFries 12 лет назад

Will it work if I use Hockey/rollerskate wheels?

@ThePaalanBoy 13 лет назад

i wanna make this in steel BUT HOW? if I make it as big as yours, it will be too heavy to carry ';. (

@YuriyKhovansky 7 лет назад

I made it by myself. I used woodprix scripts for that.

@mannymoogolf 10 лет назад

what size screws do you need

@zdunlap22 10 лет назад

I think I used 1.5 and 3 inch wood screws. Just don't use ones that are too long to the point they'll come out the other side of the wood.

@NoobGamer6969 12 лет назад

Hello sage

@hoppinonabronzeleg 11 лет назад

Hello Dave. It's only a Street Luge!!!1

@nkklkuder 11 лет назад

been 97 mph on gravity

@designstorm 12 лет назад

I like it, pretty simple to make really. Check out my street and snow combo unit. Peace.

@romanamerlene8554 7 лет назад

I am sure that you will find good way to make it on woodprix Webpage.

@ACTIONDANhero 12 лет назад

thats not how you build a street luge in any way. its how to build a "fun board". Want to build a street luge use metal not wood and street luge wheels with wider width and ceramic bearings for high speed. those look like loongboard or plain scateboard wheels