How to Build a Tool Storage Cabinet | This Old House

Подписаться 2,1 млн

Просмотров 675 тыс.

50% 1

This Old House general contractor Tom Silva creates wall-hung storage for tools and supplies. (See below for a shopping list and tools.)
SUBSCRIBE to This Old House: bit.ly/Subscrib...
Shopping List for How to Build a Tool Storage Cabinet:
3/4-inch and 1/2-inch A-C plywood [amzn.to/2mrdo5j]
perforated hardboard [amzn.to/2lrYKdE], used on the cabinet doors
metal shelf standards and clips [amzn.to/2lsTyGD]
carpenter's glue [amzn.to/2lfBnUS]
2-inch pocket screws [amzn.to/2lqB4GK]
15/8-inch drywall screws [amzn.to/2lfBhg0]
1-inch [amzn.to/2mWppQn] and 5/8-inch pins [amzn.to/2moTtE4]
1x3 pine [amzn.to/2lsYmMb]
continuous piano hinges [amzn.to/2mPhZhE]
pull handles [amzn.to/2lqG3XY]
pegboard hooks and baskets [amzn.to/2mUA8e1]
Tools for How to Build a Tool Storage Cabinet:
circular saw [amzn.to/2mVSZWe]
table saw [amzn.to/2mrlPgO]
drill/driver [amzn.to/2mSflaY]
pocket hole jig [amzn.to/2lfU9eQ]
impact driver [amzn.to/2lt1SWT]
bar clamps [amzn.to/2lpLuq4]
pneumatic pin nailer [amzn.to/2ls8KDI] with air compressor [amzn.to/2lrU73j]
miter saw [amzn.to/2mX9Ckk]
Plywood and peg-board is available at home centers and professional lumberyards.
Other tools used during this project include:
Cabinet-style table saw (Unisaw) manufactured by Delta Power Equipment Corp. [deltamachinery...]
Dial-A-Width Dado (model SD600) manufactured by Freud [www.freudtools...]
Pocket screw jig and clamps manufactured by Kreg Tool Co. [www.kregtool.com/]
Jorgensen CABINET MASTER Bar clamps manufactured by Adjustable Clamp Company [adjustableclam...]
About Ask This Old House TV: (If applicable)
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers-and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House INSIDER to stream over 1,000 episodes commercial-free: bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: www.thisoldhou...
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldH...
How to Build a Tool Storage Cabinet | This Old House
/ thisoldhouse

Хобби

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@jeffcanyafixiy 5 лет назад

When someone asks you to "make them something" most folks have no idea of the dozens of decisions, measurements, set up time that's actually involved. Not only is building something a physical act but tons of thought and problem solving is involved. GREAT video, good to show a bit of the detail involved. 👍👍

@BandasPalette 4 года назад

Wish customer's only knew and could read this comment, so true my friend!!

@JOEB955 4 года назад

All this work of watching you guys work has caused me great stress so I am now headed to the local bar!

@joeyd4356 3 года назад

Fontaine?!

@rekostarr7149 2 года назад

ahaha thx for the humanity.

@ShakespeareCafe 3 года назад

Tommy's son is a great helper.

@yourface8698 6 лет назад

I known these guys know exactly what they're doing they've been doing it for a long time Tommy's awesome! If I trust anybody to build something or work on my house it would definitely be these guys.

@nicholasdunn3897 4 года назад

1:46 and that’s why you don’t stand directly behind the blade. Those little off-cuts can do some damage when they shoot back like that. Thanks for showing proper table saw technique!

@stlchuckhd Год назад

Great ideas from your project! Thank you 🇺🇸

@GunsHarleysUSA 10 лет назад

Thank you guys for making this video, I really need a cabinet like this one maybe even two.......A big thumbs-up!

@Mike-B-Jackson 4 года назад

Anyone else see the kickback at 1:47 ?

@DChomsy 4 года назад

Was gonna comment then I saw your response.

@Fiberglasser03 4 года назад

Thats happened to anyone who has cut a rabbet.

@baerfas 3 года назад

Yep! Wanted to see what it hit lol

@christov4120 Год назад

Would be very cool to see Kevin take the lead on a build and take control..

@lovingmesomeoutdoors8729 6 лет назад

Wonder if Kevin's toolbelt is old and wore from use or just a hand me down from tom.

@RicardoJunqueira 10 лет назад

Great weekend project guys!

@robertgullickson8758 4 года назад

Great ideas and explanation. Thank you

@RCDesertRat 4 года назад

POCKET HOLE JIG FOR THE WIN! 🤠👍

@God_is_Justice 9 лет назад

I really like this, I mean really...

@nmcovert 5 лет назад

I mean since it justs a garage cabinet, couldn't I use the pocket hole jig to fasten the face frame? instead of the finger joint method?

@MixingGBP 4 года назад

I do not see why not. Since the door will get some abuse, I would also use glue to go along with the pocket screws, but that's just me. Tom probably didnt want to see the pocket holes, so he chose a different joining method.

@josephnorcalusa1710 5 лет назад

Good job, thank you for sharing !!

@seanc3362 10 лет назад

Great shop storage cabinet!

@Handygoddess 9 лет назад

I think you're amazing, I love what's happening here

@williambiggs2308 5 лет назад

I think YOU'RE amazing.

@dangerdavefreestyle 7 лет назад

Man this guy is good

@pauldonaldson6258 6 лет назад

Very interesting tool cabinet

@wolfie316781 4 года назад

At 1:02 witness the magic, perfectly straight line in freehand

@Unrealistic-o9c 2 года назад

Buy stock cabinet from HD. Customize if necessary.

@josesorto5298 5 лет назад

Great video 🙏👍

@apextools8144 9 лет назад

Nice video. Great and helpful project!

@plumbingstuffinoregon2471 5 лет назад

This turned out amazing as always. I spent an afternoon recently making my own cabinet, but mine is made entirely out of drywall screws and whatever I found in my moldy scrap wood pile. As you can imagine, mine doesn't look to good, but it's solid.

@rekostarr7149 2 года назад

cool!

@castleprodj 10 лет назад

Great idea

@lilcurtie 2 года назад

I would love to make this for my tools but can't mount it on my basement walls because of stone walls

@sajidullah 9 лет назад

excellent

@jeffbingaman2754 6 лет назад

Great vid thank you.

@noahbui1911 7 лет назад

thanks

@effinchad 4 года назад

Must be nice to have every tool, energy resource, and fastener at your disposal to make it seem easy. Renting tools doesn't always go perfectly.

@mikemerc74 3 года назад

anyone saw the light kickback? 1:46

@YoSoyGus1 8 лет назад

I WISH I HAD THIS KNOWLEDGE

@chucksmith4246 10 лет назад

Great Video... Keep em coming

@DonnellEvans 10 лет назад

Awesome

@Psychlist1972 10 лет назад

I saw that offcut of plywood kick right back down the table at close to 1:46. Luckily, it was moving slowly.

@DesolationRobot 10 лет назад

Agreed. I mean, he's the pro so I'm sure he was anticipating it (you can see his body position), but for the rest of us it would have been safer to have the offcut be on the waste side of the blade.

@patrickhalseth1632 9 лет назад

+DesolationRobot master or not that's not how you do a two cut rabbet. It's face cut first, then the vertical with the off-cut to the outside of the blade. Otherwise the off-cut becomes a projectile. It came out slowly this time but it doesn't always and just because he's positioned himself out of the way doesn't mean the guy working behind you will be. I'm surprised to see Tommy make a mistake like that usually his techniques are above reproach.

@TheReedsofEnki 7 лет назад

Technique was fine. I don't think anyone was in danger of a slow moving strip of waste. Dado blade + sacrificial fence would make it a one-pass operation but require more setup time.

@patrickhalseth1632 7 лет назад

The technique is not "fine". You NEVER make a cut that ends with a loose off cut trapped between the blade and the fence. Period. You'll get away with it one or ten or even 99 times out of 100 but eventually that off cut will come out of there like a javelin (ask me how I know). Kickbacks can reach speeds in excess of 100mph which is more than enough to cause injury.

@classic287 7 лет назад

Patrick, That's a scrap wood ejector system....

@JonesyNorthmen 7 лет назад

I noticed when you cut the dado on the table saw the strip kicked back which can be dangerous. Would it not be better to use a stop block so the left over strip dosn't get bound up on the blade?

@TheReedsofEnki 7 лет назад

Notice that he was not standing in line with the blade. That piece is fairly harmless. If you're worried about kickback doing the rabbet you could use a sacrificial fence and dado stack to remove all of the material at once. Otherwise, just don't stand in the way of it.

@houseofcards4511 4 года назад

How do you guys plan to hang this on the wall, please?

@dalebaker959 3 года назад

I wanna know if you can get the plans for this tool storage

@Bulldog44s 5 лет назад

I wish they provided the build sheet.

@Micah__ 4 года назад

2:54 what’s soooooo funny?!

@mbartslife 8 лет назад

Love your vids! ))

@plumbingstuffinoregon2471 5 лет назад

I came down here to the comments to mention the kick back, but I guess everyone else saw it too.

@datguy807 10 лет назад

how come you dont dado the center shelf ????

@bg147 6 лет назад

It isn't supporting the weight of tools. However. I would probably run some dados.

@ginoasci2876 6 лет назад

datguy807: you could, but it would take away from the strength of the top and bottom panels. Although you could only go in 1/8" just to keep in place. Not rocket science, but if that cabinet was going to the moon, dado's are required because there is less air up there.

@patriot1303 4 года назад

New cabinet was cheaper than a table saw - done

@mixpick138 4 года назад

Damnit, I know you guys consider a table saw a must --but I ain't got one! So! It's always a bummer when that's the featured tool to use. I've built a number of your projects without a table saw and just through workarounds discovered many different methods that work. It would be great, for me, if you lose the table saw and just do it with circular saws and hand or other power tools. I love the program nonetheless so don't take this as a knock --just a poor sucker without a quality table saw! Lol

@rekostarr7149 2 года назад

fk tables saws you're working with less which is more awesome and practical. I aspire to be a practical minimalist.

@ciaran6309 5 лет назад

So i first need to buy a big table saw.☺

@frogyus4880 7 лет назад

who saw the kick back at around 1:49

@morganpauley572 6 лет назад

Plans for this

@AJAviator 4 года назад

Nails...

@melickon 7 лет назад

I didn't got how to align doors accurately when using piano hinges. :(

@MrSeaneboy 7 лет назад

Tommy's little helper looks like Archie Andrews of comic book fame. Isn't that cute

@qigong1001 7 лет назад

hahahaha! So true.

@jaggerbrockhaus2480 7 лет назад

can you go to florida and help me with starting up my workshop just started woodworking

@poeticthoughts06 6 лет назад

Everyone in the comments is a woodworking professional. :|

@san379 8 лет назад

bombshelter strong

@briancnc 8 лет назад

A few suggestions. 1. Don't use a tape measure when your table saw fence has a precision scale on it. 2. On the doors insert the rails into one stile and slide the panel in. If you do it like Tom did you're just forcing all of the glue from the cope and stick joint as you fight the clamp they put on. Much easier to do this on a bench rather than the floor. For pine doors a 3/8" or 1/2" cope and stick joint is really weak too, especially in 3/4" thick material. I have seen many a doors built like this fracture the sticking in time.

@billybryson2009 7 лет назад

DON'T BELIEVE THEY WERE ASKING FOR YOUR "PROFESSIONAL" OPINION

@briancnc 7 лет назад

jer bo don't believe I was asking for yours either

@billybryson2009 7 лет назад

briancnc you need the advice though

@adamtheheavyequipmentmechanic 6 лет назад

always measure off the blade, i have never had the pleasure of using a table saw with an accurate fence scale.

@VolpeInCalze 5 лет назад

Never ever have I used a scale. Always a tape. Never had a problem.

@yaosio 5 лет назад

The remainder of the board is thrown back by the blade at 1:46. tsk tsk

@staceybabepeterstaceyenter1269 7 лет назад

I wonder if Tom Silva has a super car, if so what type?

@Icutmetal 7 лет назад

Stacey Peter What??

@markh4763 5 лет назад

That wasn't kick back, if you have ever experienced kick back the piece of wood will fly back like it was shot out of a cannon.

@alexosborn1914 8 лет назад

Must be nice to be able to afford all those expensive tools etc. I have to use what I can afford to buy plus some SKILL. still l ,m happy .

@briancnc 8 лет назад

Most of the tools used are common and rather inexpensive. The cabinet saw certainly is a cost but you can do everything he did in this video with a cheap contractors saw. Invest in used woodworking tools and you can setup shop with very little money too.

@jacquesbotha3923 6 лет назад

I recently purchased a table saw for $30, a router for $40 and a mitre saw for $40. All in great shape, good brands. If you know where to look and what to look for you can set up a wood shop from second hand tools for under $150...

@MAGAMAN 6 лет назад

If you are happy, why are you complaining about their tools? Seriously, get an education (art appreciation doesn't count) and get a better job.

@jerrywhite4497 4 года назад

Meantime at 3:03 Kevin's off in the back inspecting boards he's cut. Because he know's nothing.

@BlackSwan912 4 года назад

Jerry White You are unnecessarily unkind. Grow up.

@Vinylrebel72 7 лет назад

Wow, its easy when you have the right tools and the cash to afford them. This is not for the average man on a working budget with limited tools.

@ClicketyClack 7 лет назад

All of this can be done with a hand saw, hammer, chisel, drill, and screwdriver. You don't even need the pocket hole jig if you substitute face screws. Power tools save you time. They do not grant you extra abilities.

@peger 6 лет назад

You do not need fancy power tools for that. You can just use hand tools. It will just take you more time. Furthermore some stores will cut you large sheets plywood if you ask.

@BklynJames 6 лет назад

Since I love the older tools that are American made and will hold up. I buy most of my tools off of craigslist.

@dausciklas7537 6 лет назад

Not true tbh, you can definitely do all of this by hand. How do you think they did stuff in the old days without power tools?

@tywebbgolfenthusiast8950 6 лет назад

You can put together a reasonably decent shop for $2500. Start small then add tools over time.

@serbiedog840 4 года назад

Is it just me, or does Kevin come across as a guy that doesn't necessarily know which end of the screwdriver goes into the screw?

@brokenwave6125 6 лет назад

It felt good to see you cut that rabbit without a dozen jigs an random noveltys like people nowdays like to use. Just cut the fucking wood. People these days can't seem to just cut a piece of wood without 100 dollars worth of extra bullshit.

@devinpadilla126 7 лет назад

I`m in the retirement stage of my life. I do a bit of cabinetry, produce musical instruments, and carry out woodturning in my small shop. I have a shelf loaded with woodworking textbooks - but I discovered this woodworking book, “pepe amazing plan” (Google it). The comprehensiveness of this book is amazing. Each and every subject matter of the guide is covered perfectly.

@kringles65 6 лет назад

Some risky sawing. Plywood cabinet is no brain surgery.

@brucewelty7684 5 лет назад

Peg board sucks.

@bige9242 7 лет назад

You just shot that rabbet, bad technique!

@alext9067 5 лет назад

Handles are crooked. Just saying.

@dakotapowell9612 7 лет назад

Of all wood working book I`ve read, this “pepe amazing plan” (Google it) is the greatest. My woodworking instructor even proposes his learners to read the book. I am impressed how authors managed to write very comprehensive topics. I am astonished by the material and didn`t have a tough time following the lessons.