How To Build A Video Wall

Подписаться 357

Просмотров 55 тыс.

50% 1

In this video you will learn how to build a video wall in your home office. With more and more people working from home , people are looking to take their home office to the next level. A video wall can definatly take your home office to the next level by making your online presents more professional . It will make your Zoom calls , your Podcast interviews more, in the studio life like. it will create an amazing backdrop for your RU-vid shows or online presentations. A video wall is also perfect for virtual boardroom meetings, feel like you're really there.
*********************************************************************************************
If you would like more info or have any questions you can email: scott@avquestions.com
Looping 4K Media Player : amzn.to/3ThiTiO
Video Wall Package Used In This Video:
Check Price At Brightlink AV
brightlink-av.myshopify.com/?...
Check Price On Amazon : amzn.to/3FBzJm3
Samsung Displays amzn.to/3g9Kwu2
Controller : amzn.to/3Wz5xyl
Media Player : amzn.to/3Ql5lRC
Aluminum Video Wall Mount Used In This Video:
USA
brightlink-av.myshopify.com/?...
In Canada
bit.ly/3T7co0D
I have had a lot of questions about a video wall controller, with the ability to have 4 separate source inputs, to allow 4 different images ( a different one on each TV) then be able to switch to a video wall (4 tv's showing one large image.)
This Video Wall Controller with Matrix will do just that.
Video Wall Controller with built-in Matrix:
brightlink-av.myshopify.com/?...
Video Wall Controller used in this video :
brightlink-av.myshopify.com/?...
Recommended HDMI Cables: amzn.to/3LJGhAd
Gear used in video :
Camera : amzn.to/3bUiflALights :
Audio:amzn.to/3qaiKwV

Опубликовано:

15 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@AVquestions Год назад

Complete package used in this video bit.ly/3EIdL1i

@smitadas800 Год назад

Seems like it is not that cost-effective as I was thinking. Better to buy a bigger oled tv

@tiantianchen3724 2 года назад

Nice!

@simonriggs 3 года назад

Nice one

@kmcg101 Год назад

thanks for the video. I'm slowly learning. If I used 2 16x9 screens in portrait to display a 16x9 video, would it smush the video to accommodate the mismatched aspect ratio or is there a way to display without distorting? My goal is 2 TVs hung on a wall in portrait to simulate a view through 2 windows.

@poisonoverdose1 2 года назад

Hi Scott, thanks for taking the time to make the great video! I see you're still answering questions after a year, so I though I'd give it a try. I'm a total novice at this video wall thing, but have spent a TON of time and money doing what you have. My intent is for stage use, as I'm a musician. I'm trying to use my laptop, to play video content, through a 3X3 matrix switcher ($700 Chinese no-name), onto 9 LCD (4K) TVs. Sometimes...some of the TV's show content, but sadly, most of the time, none work at all. I get a lot of "no signal" messages. I'm using all brand new equipment, (switcher, laptop, TVs), including HDMI cables of varying lengths of 6'-15'. At this point, I'm MISERABLE and ready to give up and ditch the whole idea. If you were me...what would you think the problem is? Thanks so much!

@AVquestions 2 года назад

Hey , sorry to hear , you are having issues. Don't throw in the towel yet ! The main issue people have with the " no signal" problem is HDMI cables . HDMI cables have ghosts in them . Some controllers and TV's have troubles making that hand shake connection. and for whatever reason some HDMI cables will just not work in that particular combination of controller and TV. I have had that issue with brand name cables and switched them out to Amazon's HDMI cables ( they seem to be good quality) and problem goes away . I would start there. Use same brand and length for all TV's . Hope this helps!

@michaelwilliams9508 Год назад

Hi I'm interested in making one for the same purpose...any advice would be appreciated...

@soreloser6018 3 года назад

Nice. And now you just need to update your key light. Nice video.

@AVquestions 3 года назад

Yes you are right , so hard to get that key light right without showing in the back ground.. I have experimented and have it much better in new videos

@DrAlexanderHamilton 3 года назад

@@AVquestions WHAT IS key light?

@patrickcouture5383 2 года назад

Great video, thank you. With this set up, is it possible to watch something separate on individual TVs and at the press of a button use it as a video wall from one source?

@AVquestions 2 года назад

Yes , absolutely I use this unit right now , It has matrix capabilities , 4 inputs to 4 TV's and the ability to quickly change to a Video Wall.brightlinkav.com/brightlinks-4x4-4k-hdmi-matrix-with-built-in-4k-video-wall-controller-and-multi-viewer.html

@rogerl8488 2 года назад

@@AVquestions hi so I want to put 4 55 in tv on my wall just to watch TV so that being said can I watch 4 different TV shows or games or if I decide to watch one game cast over all 4 tvs is this what I need to buy the link you provided? Thanks you.

@darkwing3147 2 года назад

Thank you for the great video. I just have one question, how do you connect speakers to the screens?

@AVquestions 2 года назад

The two most common options for audio # 1 The controller has an audio output 3.5 mm / 1/8" that you can run to a bluetooth speaker or home theatre system. # 2 your source would also have an audio out. Hope that helps .

@michaelwilliams9508 Год назад

Thank you... Great video

@hawaiisurfingacademy Год назад

Scott , is it it possible to make a video wall for the outside of my stepvan? weatherproof of course? appreciate your thoughts!

@aray2100 2 года назад

Where did you get the "hook brackets" from the TV to the 80/20?

@justicefreeman6930 Год назад

I’ve never done one. Would it make sentence to assemble with TV’s face down on the floor. Then unhook the frame from the TV and mount it to the wall. Lastly pick up each TV and hang it. Did you say the top TV’s may need to flip over?

@robertthompson8861 3 года назад

This is a great idea! While I can find sources for the 1.5" extruded aluminum, I can't seem to find any of the brackets used. Could you provide me with a bit more detail as to where you found those for both the main extruded aluminum frame but also the bent aluminum bracket used to mount the TV's the extruded aluminum. Thanks!!!

@AVquestions 3 года назад

Hi Robert, you can talk to Tyson at Brightlink AV tyson@brightlinkav.com

@AVquestions 3 года назад

It also depends on the bolt patterns for your TV's these brackets can be drilled to work in your application. You can email me at scott@vancouvervideowalls.com and I can show you more info.

@micmaclenn397 3 года назад

Hi Scott, I am adding a video wall to my home office and I really like your design! Where can I get the specific rack and rails that you were using?

@AVquestions 3 года назад

Hi Mic , you can use 1 1/2" square extruded aluminum (80/20) bars or buy the kit from Brightlink AV brightlinkav.com/catalogsearch/result/?q=wall+mounts

@micmaclenn397 3 года назад

@@AVquestions Thank you!

@MacChainCoLtd 3 года назад

@@micmaclenn397 let me know if I can help in anyway

@Btstaz 3 года назад

The documentations seems to say the output from the splitter is only 30hz is that correct? I also don't understand why it is splitting to 4K@30hz, is it up sampling? and if so why not let the TV do that they already have dedicated hardware to up sample which is probably better then this device can do. It does say it supports downscaling but does not specify the hz if downscales to. The last thing I want is to provide 60hz input and get my video wall running at 30hz. Can you clarify if the documentation is wrong?

@TheSaltyfamily 2 года назад

Great DIY video Scott! What are the brackets called that mount to the TV and the T-bars? Where can you purchase them?

@AVquestions 2 года назад

Thanks for your interest . The brackets that mount to the TV's are called TV Hooks . I am not sure if you can purchase TV Hooks seperate.The hooks I used were from Brightlink and were supplied to me for this video. If I can find the hooks sold separate I will let you know. You can purchase complete kit here: brightlinkav.com/aluminum-mounting-brakcet-for-video-wall-displays.html

@TheSaltyfamily 2 года назад

@@AVquestions Thank you for your response. Are those brackets exclusive to brightlinks complete mounting kit? I have talked to hardware stores and local AV installers and they have never seen them before. I also looked on Amazon and haven't found them. I've already purchased the t-bars and other brackets based on your video and would be interested in purchasing those brackets separately.

@AVquestions 2 года назад

send me your address to webberindustriesinc@gmail.com

@fundr1974 2 года назад

Hi, What TVs are you using?

@bantertv9332 2 года назад

Hi, could you dismantle the screens and remove the bezel and mount them closer for more seemless joint? Do you have any thoughts?

@JoelSapp 10 месяцев назад

That’s one of my thoughts on this too. I get why manufacturers make wall panels for companies but they could do the same for homes but they price way too high for mid-high end home use.

@jonathanmeier5929 2 года назад

Looking at putting a 2x2 video wall in my bar. I can watch it as a big display or watch 4 separate games at one. Couple questions. 1. Do you need a computer for the set up or just the matrix switch? 2. What is the best way to run the TVs individually, one remote would essentially change them all which seems frustrating. 3. Could a fire stick work as an input source for the video wall?

@AVquestions 2 года назад

Hi Jonathan , yes make sure you get a video wall / matrix controller . If it is just a video wall controller you can only have it set for one image. The controller has to have the option to run in matrix mode . With the matrix option it would give you 4 seperate inputs or more depending if you are going to have a 2 x2 configuration( 4 TVs) or 3 x 3 ect. A fire stick or Apple TV work great. and most controllers are just plug and play. You don't need a computer to run the video wall. You can run cable boxes into each input . Some cable providers have a compressed signal and may be a not perfect image if you use large displays 65" or bigger and switch to video wall mode. The image is a little pixelated up close but fine if you are a little farther away.

@pedroluchesi5285 11 месяцев назад

the video wall gear works with tube tv's ? if i use i rca to hdmi converter

@12mrvega 7 месяцев назад

Is there a video where you show when the two top tvs are up side down, and turning on the device

@Iss-baar-400-paar 2 года назад

Hi Scott, can this be done with 2 video projectors and the 2 screen placed at right angles, and create an immersive experience ?

@tangandy1980 2 года назад

Hi dear our product support video wall and multi projector function

@juanl4496 2 года назад

Hi Scott, you mentioned the top two screen were upside down to create a smaller crosshair, how did you flip the image of the top two screens?

@AVquestions 2 года назад

The video wall controller has the ability to easily rotate the image of each individual TV .

@samueljohnson1483 10 месяцев назад

Hey Mr, please can you tell me where to get these items to buy?

@gregorynp 3 года назад

I would like to have a video wall with option to either see one image across the 4 screens or four different Cable channels. Is that possible with your hardware?

@AVquestions 3 года назад

Yes Gregory , what you need is a Video Wall Controller that has a Matrix option . This will allow you to have 4 HDMI inputs for 4 different sources . Then you can have each TV displaying a separate image or choose video wall mode and have 1 large image . I can give you more information if you would like, you can email me at scott@brightlinkav.com

@MrSirjud01 4 месяца назад

How did you invert the top two displays? Can you simultaneously have 4 different displays (one on each tv)

@AVquestions 4 месяца назад

The controller allows you to rotate image on any of the 4 displays. It's a very user friendly front panel interphase. The controller I used is Video Wall option only . You can get controllers that have a Matrix /Video Wall option that will allow you to have 4 separate inputs to go to each display or switch to a single image over the 4 displays.

@jamiehansen3140 3 года назад

What TV's are you using, I haven't seen anything with a clean bezel

@AVquestions 3 года назад

Hi Jamie , I am using Brightlink 49" displays .. They are pricy but have a super thin bezel . In one of our offices we are using 49" LG tvs from Costco . Its a thicker bezel but it still looks really good. brightlinkav.com/brightlink-s-new-49-1080p-4k-w-multi-screen-video-wall-display-ultra-thin-3-5mm-bezel-super-bright-450cd-m.html

@jamiehansen3140 3 года назад

@@AVquestions /thank you sir.

@joshuashaw8244 3 года назад

Scott is there anything special I need to do when turning the TVs upside down?

@AVquestions 3 года назад

Hi Joshua, the TV,s pretty much mount the same way upside down ,so thats straight forward. Rotating the image is done in the interface of the controller. It depends on the video wall controller you will be using , it must have the ability to rotate images ( most on the market should have that ability now) very easy to do on the Brightlink controller used in the video.You go into settings , choose the TV ( 1-4) that you want to rotate, choose rotate and thats it. Hope this helps !

@joshuashaw8244 3 года назад

@@AVquestions Thank you!

@michaelcollyear2077 4 месяца назад

Hey can this be used on 1x2 two tvs as well?

@AVquestions 4 месяца назад

yes absolutely , but you would need to make a custom graphic / video size because it would not be the usual 16:9 aspect ratio. I have done 1 x 3's that work great.

@digitalnitingarg 2 года назад

Please share integration videos, Digital signage application, these are quite confusing.

@uptoproofingdisastersoluti7218 2 года назад

I want to build for my box trucks 🚚 for a digital billboard business. I think ill need more than four tv hook ups for side... any ideas?

@AVquestions 2 года назад

You could do 2 x 2 ( 4 TVs ) per side or 3 x 3 ( 9 TVs aside . A LED setup might be best for your setup . Much more durable than LCD . brightlinkav.com/video-walls/led-video-wall.html

@laurieyoung100 Год назад

How do you flip the screens upside down and monitor models?

@AVquestions 11 месяцев назад

Hi Laurie , the video wall controller takes care of this no problem.

@24kprincep 2 года назад

Hey Scott, would it be a good idea to make a video wall with 2 tvs only with your product? I wanna do it to play video games and maybe watch some sports so…is there anything i need to know?

@AVquestions 2 года назад

Yes you can create a video wall with 2 TV's but what you have to keep in mind is aspect ratio.What you would like to achieve is 16.9 or 4K 21.9 aspect ratio. This would not be achievable with only 2 TV's unfortunatly .It will strech the image out a little too much and look a little differnt than what you're use to.If you can go to 4 TV,s you would have a much better result.

@24kprincep 2 года назад

@@AVquestions cant we balance it with the Size like bigger tv’s maybe?…I’m trynna figure it out in the most affordable way possible u knoo

@robroy3185 3 года назад

What tv did you use

@AVquestions 3 года назад

Hi Rob , I used 49" Brightlink Displaysbrightlinkav.com/brightlink-s-new-49-1080p-4k-w-multi-screen-video-wall-display-ultra-thin-3-5mm-bezel-super-bright-450cd-m.html

@sevvalbayraktar2038 3 года назад

how to use and connect to videowall controller?

@modishnailspaminthill6097 3 года назад

Will it work with any TV?

@AVquestions 3 года назад

Yes any (TV)display with an HDMI input will work , the source input quality is the most important part of a video wall . The better the input image ( 4K) the better the results of your video wall.

@thegarageatlucyspleasantvi3453 Год назад

What screens did you use?

@AVquestions Год назад

Hi I used Brightlink 49 " Commercial displays bit.ly/3Yrn5Nw

@toddhare8225 Год назад

scott.. How do you do this if you use a streaming service instead of hardwire?

@AVquestions 11 месяцев назад

Hi Todd , this is a very late reply but just treat the video wall like a single TV to display . There is no difference .

@mysterious_billionaire 2 года назад

Would it still work if you use projectors instead of TVs?

@tangandy1980 2 года назад

Hi dear we have multi projector edge blending if you interest please email me

@shankarvishwanath9001 3 года назад

Hi Scott, If I have only one image that I want to send to a video wall built with just TV's (that are not daisy chained), is there a controller that takes one input, splits the image and outputs 4 cdmi's outputs? your help is appreciated, thanks

@AVquestions 3 года назад

Hi Shankar , Yes that is exactly what the controllers do . One source (laptop, Apple TV , Roku ect.) into controller , then 4 HDMI outputs to each TV or display. Hope this helps .

@shankarvishwanath9001 3 года назад

@@AVquestions want the opposite Scott, one in, 4 out, but only one image, split into 4 proportional parts to make one large image

@EpicRSFail 3 года назад

@@shankarvishwanath9001 Did you found any solution?

@fegoodson8752 2 месяца назад

How to you create the tv wall where each tv can play different without having multiple cable service

@AVquestions 2 месяца назад

Unfortunately the TV Walls will only play whatever HDMI source you plug into them . Apple TV , Cable Box , Etc.

@welovelibraries4556 3 года назад

How do I get a different cable channel on each monitor?

@AVquestions 3 года назад

This controller will allow you to have 4 different sources ( 4 inputs)that can be sent to each monitor or have 1 large image over the 4 monitors. Unfortunately you would need a cable box for each Chanel. brightlinkav.com/brightlinks-4x4-4k-hdmi-matrix-with-built-in-4k-video-wall-controller-and-multi-viewer.html

@welovelibraries4556 3 года назад

@@AVquestions Do you have any experience with using any of the controllers that use an app on the iPad to control what’s on the monitors like hiperwall

@bestamerica 2 года назад

' nice big TV... not like 2 black lines as.. + ..on the wall

@malachipadilla6017 2 года назад

Hello I know that your video was only how to set up a 2X2 setup for a TV wall is there a way to do a 3X3 setup or even a 4X4 setup similarly to the way you did your wall or is there a lot of more added steps?

@AVquestions 2 года назад

Hi Malachi, I am working on a new video for a 3 x 3 -65" . Here is a link for a time-lapse 3 x 3 build . ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jr_8OOsyits.html