How to build a wall cabinet with pallets 

you are the king... the Langoda king

Always the best looking pallet boards I've ever seen. Perfect edges, straight with no checks or twists. Your pallets are better than most of my lumber.

Love to watch another "leftie" working!!

Nice project. I finished an entire wine room with old blackened cedar fence boards a few years ago (it turned out gorgeous) and if I can make a suggestion it would be to sand all the boards on all sides before making the project. I spent many hours sanding them outside but it was well worth the effort. Much cleaner and nice-looking, and no trying to get into the corners to sand.

Beautiful hermoso quedo eso amigo

I like this idea,and I love that it is made from pallet wood. I did not however like the front,top piece, I am going to make it with an angled piece,more like the shape of a traditional out house. I guess to each their own, great project for the kids as well.

Been watching loads of your silverline vids. Giving me some great ideas. Ps. Big Brother went downhill year after year after you won that first series. God bless Craig.

Really. Can't think of anything else to say 😮😮😮

Great value, works perfect

Very simple and clearly introduction. Many thanks and subscribed!

Pretty simple and well explained.....thank you

No need to use nails to show how to line up,simply align the 2 pieces and mark the 2 with your speed square to mark identically. Works everytime!

Excelente tip el de marcar con clavos los agugeros de loa taquetes , enhorabuena , lo pondré en práctica.

I love your videos! I found you my accident yesterday very well laid out practical your editing skills for your video are excellent very well don't sir!

very nice i like it

The nail tip where you cut the head off is so smart but you could always biscuit it

nice job Craig

Fantastic ⭐️⭐️⭐️⭐️⭐️

I use quite a few Silverline products and love their dowel pins that help you lay out your dowel holes. I highly recommend them. Fab pallet project. :-)

Thank you for your videos.

Nice little unit. Brad. point drill bits ensure more accurate pilot holes is that what you are using.

Craig I have a question.....when you where knocking in the wood with a hammer wouldn't be best to use a rubber mallet ro stop the dents in the wood

I hate reading know all comments on youtube but....you should ensure people understand the stamps on the pallets, some are sprayed in insecticide and some aren't, just a safety precaution. Nice job man.

Its really nice what you are doing .I like that

You make some awesome stuff! Subscribed! I wish you used inches but most of the world uses metric so I understand!

Good work and looks easy

U do good work man a wine rack would look great outta pallet wood

Well done video.

I would glue the panels together before i assemble the cabinet

I like this Craig nice work!

nice job Thank you

Nice job!

I'm confused. You used a Silverline square .. and the product actually came out square?? ..how did that happen?

awesome

That skirt round the edge at bottom is it literally on the edge of the wood at bottom as dint see you do it

Hello sir! I love your videos. I've been watching your tutorials almost everyday. Love and respect your work, im also working on making furniture and home decorations for my house. My next goal is to buil a japanese style frame out of pallets. I will appreciate any ideas you can suggest. Thank you so much. Greetings from fort worth tx us

Coloca legenda em português por favo

Sus trabajos son muy buenos traduzcan en español

Should sand when it's apart

A couple more ideas. Thing 1) You didn't have to use the dowels once the nails were in. They have rings on the shank. Also the dowels have a bigger diameter, meaning that it takes up a greater amount of space, meaning that you essentially created 3 weak points for weight to be placed once the shelf is upright. Thing 2) There was no need to remove the shelf to mark it for drilling. Simply measure from the top of the top board to the center of the shelf. Repeat the same onto the back, mark your line with a level and that's it for that. Also, don't push so hard while drilling, that's how you blow the backside out in big splintery patches. Let the drill and drill bit do the work, it's designed to pull in while cutting, hints the name drill.... Thing 4) You put the cut edges out to the open, that's a huge no no in my opinion. Should have let the older (factory) side out so that it matched the rest of the cabinet.

Let us know Where you got all that perfect cuted pallet wood

Where can I get some Sliverline Tools sent to me to try out at my shop???

Its a great project man, i really liked it and i will try it out as soon as i can... actually it looks like already finished with those tones.

just get boiled linseed oil with mineral turps and wipe it and paint with black stain and it would look like a nice piece!

great project mate..

Don't forget to fill all of the wood screw holes with wood filler.... Or mix saw dust with wood glue.

I just sub your channel my friend ok,I love pallet work projects your the right channel for me my friend awesome videos :)

How is he just flexing his incredible ambidexturity on us like that

GREAT JUB YOU NEED TO USE BRAD NAILER LIKE NAIL GUN MAKES YOU MORE A PROW

Yea OK.

Please can I ask how wide a pallet lad normaly is

Nice project, but you sure used a lot of tools that you didn't list in the beginning.

Nice idea shame he's not a joiner never hit your work with a metal hammer use a rubber mallet and a sacrificial block of wood

Obviously no one is perfect at building ANYTHING with your hands. I spotted a few things that you do that are kind of counter productive. Thing 1) you fumbled with the boards trying to clamp it together. Might I suggest just screwing a straight edged board down to the table and using it as a backstop, also it will help keep a nice flush edge. If your cuts are straight that is ... Thing 2) You're using, what looks like to me, a #8, in diameter, screws. Might I suggest using trim screws, just as sturdy and you probably wouldn't have to pre drill the holes considering how small the diameter is. Thing 3) Whilst pre-drilling the pilot hole for the screw I noticed you where guessing the depth. Why not a) put a piece of tape around the bit with a little flap, stop when you hit the tape. B) set the depth by using the drill instead of an impact. With the drill you can adjust it to whatever height or depth you like. I'll be sure to spot more and give a few pointers. Another great video btw, keep them rolling.

Traduzcan

I'm blue da ba die da ba dae.....

Janis klan gurten morguen cabeza cuadrada

Billy Jack building a cabinet. lol

Sand first. Just saying

Taip Meh-Zheh Cool accent man

Art Attack but with wood.

I guess silver line doesn't make a nail gun?

They're pallets, good enough

no way. at 4:24 how on earth did he get all that drilling done on thin pallats without splitting a single one?

Dressed like his tools

Partition.. Not Petition...

Come on lads...us scousers know where to get the best pallets for free......they might be loaded with something first😏....lol

Direction in inches would be better instruction

When Jesus said in the bible: "I'm ascending to my God and your God" What does he mean? a).He is ascending to himself because according to the paul in church jesus is God. b).He is ascending to the true God because he is not God but a man who worship God. c).Both of the above. David, Suleiman and the other messengers of God are called "son of God" in the bible: So it means all of them are God in case someone believes that jesus was God, so do the others? a).They are not God, nor jesus. Because son of God is an inspiration word used for respect etc. b).Yes all of them were God. c).If we call jesus "son of God" it means that: he is a special son of God (begotten) Jesus did not have a father and is this reason good enough to make him a special son of God? a).Yes it is. b).No it is not enough to call someone a special "son of God" and worship him because Adam also didn't have a father nor a mother but we don't worship him because of this reason. c).I still believe jesus is God and i worship him. 👇 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pCuxnu_IGUk.html