How to build ANY small cabinet out of MDF!

Подписаться 271 тыс.

Просмотров 41 тыс.

50% 1

Today I’m building a simple cabinet to box in our electric meter and stuff. I’m making it out of left over scraps of MDF and I’ll cover the full build process in detail. Once you can make something like this you can make pretty much any cabinet. This is really useful if you ever need a cabinet that’s a non-standard size, like this. Enjoy!
How to paint MDF:
• How to paint MDF - DIY...
Join the Member Zone for extra stuff:
members.gosforthhandyman.com/
Gosforth Handyman shop:
gosforthhandyman.com/shop/
Subscribe to the free Gosforth Handyman newsletter:
gosforthhandyman.com/newsletter/
TOOLS & PRODUCTS I USE: gosforthhandyman.com/products...
INSTA: / gosforthhandyman
X / TWITTER: x.com/gosforthandy
GARDENING CHANNEL: / @andymac
CORRECTIONS: gosforthhandyman.com/correcti...
Simple Cabinet Chapters:
00:00 - Introduction
01:00 - Cabinet design
01:40 - Standard dimensions
02:44 - Table saw
03:10 - Making the sides, top and bottom
05:10 - Joint options
08:25 - Initial assembly
10:30 - Door height
12:25 - Scribing
14:25 - In-fill panels
15:40 - Dealing with MDF edges
22:26 - Euro hinges
24:00 - Fitting to the wall
24:43 - Finishing touches
26:00 - Fancy options
All content on this channel is exclusively owned by MacLellan Creative Limited. Copyright (c) 2024. All rights reserved.
#woodworking #diy #renovation

Хобби

Опубликовано:

8 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 148

@bigutubefan2738 3 месяца назад

This is a nostalgic trip back to the pre-Covid golden era of Gosforth Handyman videos.

@k.hussain360 3 месяца назад

Every time I paint MDF, I refer back to your original videos. So far there's like 5 or 6 projects and the finish has been spot on each time. Zinsserr 123 as a primer is spot on.

@Skandoro 3 месяца назад

That's my go-to MDF primer too! Does gum up the sandpaper of medium/fine grit though

@GosforthHandyman 3 месяца назад

Fantastic stuff! Once you've cracked the fluffy edge problem you can make anything. 👍😁

@k.hussain360 3 месяца назад

@@GosforthHandyman definitely. Got a cabinet I need to build at some point soon as well. Currently in the process of over engineering I mean designing it 😂

@Liverpool1ne 2 месяца назад

Love a bit of Leyland acrylic primer and undercoat 👍🏻

@geraldwatson732 3 месяца назад

Thank you for taking the time to explain and provide these videos.. They really do help us ..

@prodical666 2 месяца назад

Brilliant video. Even cabinet guru Peter Millard would be proud of that quality

@MK-yo4jn 3 месяца назад

Yay a video from Andy. Great to see some new content 😊

@GosforthHandyman 3 месяца назад

Cheers!!

@MK-yo4jn 3 месяца назад

@@GosforthHandyman you have an excellent way of explaining how to do various pieces of DIY. It's very empowering 😃 Looking forward to more content. But no pressure if you're busy. I don't mind going back and rewatching. The Reno time lapse has nearly 1M views. Well done Mrs Mac as well

@lfcloyal8284 3 месяца назад

Great Job Andy lad 👏👍

@freespirit906 3 месяца назад

Fantastic finish to the project and the Mrs has done a great job with the paint. Thanks again for another insightful video, btw the new property is very nice too 😊

@jamiebrazier2023 3 месяца назад

Love the way you explain your methods 👏 more of these types of vids please!

@1A9lis 3 месяца назад

Hi Andy was you tempted to make it a bit wider to accommodate that armer cable on the right side . But as a retired electrical contractor I might have tried to make the cable fall closer to disruption board . By probably drilling at an angle to get closer , but I’m just an old fuss pot . And having in the past trying to get at a dis boards that have been covered up to the point , you can’t even remove a cover to gain access to fuse boards . It’s a breath of fresh air to see you doing it properly for any future electrical work . Great work as always Best wishes and kind regards as always 👍

@GosforthHandyman 3 месяца назад

As the back door is quite close it would get in the road if it was any wider. So it was kinda trunking vs painting the cable... and I had the paint out. 😁👍

@garrywalker8714 3 месяца назад

That looks shop bought Andy! I've never really used MDF but would definitely consider it now, it looks class with that really good finish.

@cherylholasek2193 3 месяца назад

Another great video. Thanks for sharing all your helpful tips with us. 😊😊

@GosforthHandyman 3 месяца назад

Cheers - no worries!

@markhannan4712 3 месяца назад

Excellent job and thanks for the painting tips .

@GosforthHandyman 3 месяца назад

Cheers and no worries!

@r.d.1991 3 месяца назад

What a neat little job. Perfect! 👍

@GosforthHandyman 3 месяца назад

Does the job! 😊

@sylviagreybe672 3 месяца назад

That is a GORGEOUS cupboard!

@GosforthHandyman 3 месяца назад

Thank you - it's cute! 😊

@gashead2 3 месяца назад

Nice job

@Quaker521 3 месяца назад

Great job and a great video. Thanks.

@GosforthHandyman 3 месяца назад

Cheers!

@MarcusNailor 3 месяца назад

Very nicely done 👏👏👏

@GosforthHandyman 3 месяца назад

Cheers!

@armyofcats 3 месяца назад

Really good advice, cheers Andy! Your whole renovation project has been inspiring to follow allong with. As someone who's just finishing a kitchen design for our own home renovation, I recognised that DIY Kitchens planner screen. Spent hours playing around in there!

@GosforthHandyman 3 месяца назад

Their planner is excellent! Good luck with yours!

@pinkplonker8776 3 месяца назад

Great video as usual, thanks. I made a cabinet to cover my consumer unit recently which was wall mounted. I have found that if you need to use screws where the heads need filling then the “Lost Tite” and “Tongue Tite” type of screws leave a tiny hole that is easier to fill. I use the acrylic primer which is good. I have also used sanding sealer which is easier to apply. With sanding sealer, I also enjoy the smell of it in a slightly pervy way 😀😀.

@mikebashford8198 3 месяца назад

Fantastic job!

@GosforthHandyman 3 месяца назад

Cheers!

@nigel4425 3 месяца назад

Hey Andy - if you have any spare, run the skirting around the plinth. With such a low profile unit, it really helps to blend it in. DOH!! just got to the end. Nice work!

@GosforthHandyman 3 месяца назад

Don't have any spare unfortunately - cheers! 😁

@rodgerq 3 месяца назад

Really nice job! I never get great results going straight into MDF edges with water based primer. I tend to do a coat of shellac based first then the acrylic with a sand in between. Painting that cable on the outside really helped take the look away from it.

@andyc972 3 месяца назад

Nice one Andy, this is exactly the type of real world woodworking project I like to see, plenty of useful tips, work-arounds and alternatives considered in your voice-over which is great ! We defo need to see more truncheons used in woodwork assembly ! 🤣 As always Mrs Mac did a grand job on the finishing and the final result looks perfect in it's setting ! I made something similar under our stairs to enclose all the meters etc when we moved in here, I designed it with doors but never bothered with the doors in the end as hidden away anyway. Ours is much less tightly packed with equipment so with a few internal shelves added it's the ideal place to keep a torch, spare bulbs, fuses etc. Btw, nice choices of unobtrusive music, beautifully well balanced with background noises from the construction - top work !

@GosforthHandyman 3 месяца назад

Fantastic stuff - good tip on keeping a torch in there! I'm going to add that. 👍👍

@shaun30-3-mg9zs 3 месяца назад

Hi Andy, nice unit for the electrics, a great build with a great finish good job😁MDF is made 12 miles away from me in Kronospan in Chirk, Wrexham my brother works there. I was quite lucky with my electrics they are in the top left corner in the kitchen, the kitchen units hide the electrics fuse board and meter.As always full of good tips and ideas and a great video catch you soon Take care👍

@MarcusT86 3 месяца назад

Beautiful work!

@GosforthHandyman 3 месяца назад

Cheers!

@normanboyes4983 3 месяца назад

Nice job Andy, looks absolutely spiffy. My only observation (and all design is a compromise) is it does not allow much room for future growth in terms of electrical equipment.Great tips on finishing MDF.😀👍

@jamesduffy5019 3 месяца назад

Excellent vid mate👍

@GosforthHandyman 3 месяца назад

Cheers! 👍

@stevewood7884 3 месяца назад

Nice job there Andy, 👍

@GosforthHandyman 3 месяца назад

Thank you!

@blondeenigma3882 3 месяца назад

Fab job ! I've got a very similar white wooden meter cupboard in my hallway, made with the house in 1953. Got to say they are very well constructed, and it closes beautifully, as do the full length cupboard doors in my kitchen. It's an ex council house, and the joinery is very good.

@GosforthHandyman 3 месяца назад

It'll be solid if it's ex-council! 😊💪

@chevyimp5857 3 месяца назад

Shellac sanding sealer works great on MDF edges

@SalC007 3 месяца назад

Great job Andy. Would love to see you make fitted wardrobes or do an IKEA Pax wardrobes hack.

@projectrebuild908 3 месяца назад

Great video.

@GosforthHandyman 3 месяца назад

Thank you!

@michaeltreadwell777 3 месяца назад

Excellent job - well done. Some good tips too. I would have had to box in that stray cable to the side too though ! Thanks and take care 🙂

@GosforthHandyman 3 месяца назад

Cheers! It was trunking vs paint and I had the paint to hand. 😁

@Toolswithmatt1 3 месяца назад

Got to say I love this cabinet you given me ideas for a similar project what top coat did miss Mac use looks kind of like a gloss great video your one of my favorite wood worker/ RU-vidr that i enjoy watching

@GosforthHandyman 3 месяца назад

Great stuff - thank you!

@weetecguy97 3 месяца назад

Love it ! Ours badly needs a face lift, after watching this I think I'll just build our own 😁 Nothing to brag about but it also gave me an excuse to pickup some Parkside tools, as Lidi launched the tool line today. Have a few branded tools, DeWalt is usually my go-to, but today I added a Parkside jigsaw and plunge saw, as well as a wet and dry vac just because 😅 I figure if I get enough use out of them, that warrants purchasing dewalt branded ones. Cheers Andy !

@JenOooo 3 месяца назад

I'm excited for the next project! 👏 Want to build a shallow wall mounted cabinet for my tiny hall to house my vacuum. I've never built anything other than IKEA stuff 😂😂 Doesn't even need a back, I've a power outlet on the wall to recharge the little dust monster 😂 So I want to create a big wall hung box I think 🤔

@robthewaywardwoodworker9956 3 месяца назад

Nice little project, Andy. Makes it all tidy. Good note for those adding doors with hinges, just like you did, make sure you space them the same from the top and bottom edge so you can flip them. Good call. I like the soft-close attachments. I just added one of those to a bathroom vanity cabinet yesterday. I did my whole kitchen, in our last house, with those. Makes all the difference and they are very inexpensive, compared to the soft-close hinges.

@GosforthHandyman 3 месяца назад

I was determined to just use 'scraps' for this project. It was a challenge finding 4 matching hinges!! 😂😂

@robthewaywardwoodworker9956 3 месяца назад

@@GosforthHandyman I could sense your determination looking through the bin of hinges!

@raydriver7300 3 месяца назад

Hi Andy. Another great job completed with excellent voice over as always. I made a cabinet in England to cover my Son’s electrics in France and it was interesting as I was working from his measurements! I also have a box of hinges very similar to yours. Give my best to your family and let’s be nice to each other 🌞

@GosforthHandyman 3 месяца назад

Thank you Ray - can never have enough spare hinges!! 😂👍😎

@raydriver7300 3 месяца назад

@@GosforthHandyman Hey, Andy. Just to let you know a message has appeared asking me to telegram (you!) saying can we talk private. I’m not responding but thought you should be informed. Let me know if you want more information and how I can get it to you. Regards Ray 🌞

@kevgreathead1886 3 месяца назад

Hi Andy, general question on wardrobe finishing. Would you rather build a wardrobe then paint it OR paint all individual panels and build? Thanks for all of your tips over the years, helped me out loads 👍🏻

@alanmullock381 3 месяца назад

Good show Andy,top tips too! 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎😎😎

@GosforthHandyman 3 месяца назад

Cheers Alan! 👍

@Pete.Ty1 3 месяца назад

👍👍👍.Thanks Andy

@GosforthHandyman 3 месяца назад

👍👍👍

@petercampbe11 3 месяца назад

great video - i wouldnt like to drill into the wall so close to the electrics though

@dbat3291 3 месяца назад

A another good one well explained. With ordering the doors, did you have to cross check the colour, not all whites are the same I mean?

@excossack 3 месяца назад

Nice work. I seem to struggle to get the right combo of screw size / right size plugs. Any tips?

@davetay44 3 месяца назад

Not watched it yet but I already know this is going to be a big help. I have this exact job to do in the next few weeks. So thanks Andy! Edit: now after watching it, of course I was right and as usual a very informative video, Thanks! The one I plan to make, is in our hallway and roughly the same height as yours (give or take) and I was planning on taking the unit all the way to the ceiling and adding shelves and cubbies above the electric meter for hats, gloves, scarves etc, maybe the odd pair of shoes - what are biscuit joints like for strength - do you think it would be sufficient for that application? I guess I could use normal shelf pins for the cubbies 🤔 but I do love an excuse to buy another tool!

@cricalix 3 месяца назад

Nice video Andy, thanks. Would you trust 4 small fixings like that for a slightly bigger cabinet that's up on a wall with no floor to support it, or would you aim for 6 or 8 of them? Or even a batten on the wall? Ireland is a bit different - our meter etc has to live outside (and it's tagged etc), and a feed is brought in to the consumer unit. I've got routers etc in the same area, but it's also ~1.6 metres off the ground, so a cabinet around all the gubbins will need to be wall mounted, not floor-standing. Wall itself is 50mm insulated plasterboard on breezeblock or similar.

@charvais 3 месяца назад

I haven't read other comments, but you could have made the top surface to cover the complete area even with a couple of mil overhang !

@briannewton3535 3 месяца назад

MDF is a pain in the arse at times. I remember trying to apply iron on oak veneer strip to oak faced MDF. After failing to adhere, I learned the hard way that MDF edges need sealing prior to doing this.

@GosforthHandyman 3 месяца назад

Yup, if in doubt seal it! 👍

@300Exige 3 месяца назад

Nice job. Where to buy ready made doors ? Thx 🙏

@stevewood7884 3 месяца назад

I've always had good results with mdf edges by sealing with pva glue mixed with a touch of water, the key is sanding with each coat of paint.

@GosforthHandyman 3 месяца назад

PVA works! 👍 I find this primer dries quicker and is even easier to sand.

@Monkeh616 3 месяца назад

I do the same with the endgrain of most woods. People just want to slap a coat of paint on with a brush and be done, but there's a process to everything.

@GosforthHandyman 3 месяца назад

Defo! Skip a step and it all goes wrong. 😁

@BritishRosie-es3zr 3 месяца назад

I have a cupboard to build, this has been hugely helpful! Would a track saw be just as good as the table saw? There are some inexpensive ones in our local shop

@ACAIDC 3 месяца назад

A track saw would work just fine.

@katelocke4288 3 месяца назад

Are there any safety considerations for the size of the cupboard? Just thinking about fire risk etc

@georgeprout42 3 месяца назад

Happy Boxing Day everyone!

@GosforthHandyman 3 месяца назад

😁😁 Barely anything from my original footage made it in to the final video!! 😭😭

@TechOne7671 3 месяца назад

Nice job Andy. I have watched you renovate that house and it’s a cracking job start to finish but as a spark, I have got to ask, what is the sidewinder cable doing coming out the side for ? Could you not have buried it in the wall ?? All the best.

@michaeltreadwell777 3 месяца назад

I would have had to box that in too - would drive me crazy to see that !

@ACAIDC 3 месяца назад

A small piece of trunking would tidy it up.

@gwenscoble6229 3 месяца назад

It's a utility room. There is just 1 cable which is fairly narrow, trunking will make it thicker. Trunking ends are just cut, hidy hole for spiders etc. Trunking always discolours. Personally I prefer the painted cable to the trunking.@ACAIDC

@GosforthHandyman 3 месяца назад

Yeah it's a single leaf brick supporting wall so I'm not a fan of chasing in to such things and I'd rather know where the cable is for any future work being done. The room is essentially a big cupboard so all good. 👍😁

@TechOne7671 3 месяца назад

@@GosforthHandymanfair enough mate, I know what your saying. I had a similar thing, I renovated my house top to bottom like you, during the renovation I noticed the old small supply cable coming from next door. I notified the electricity board about this but the wouldn’t change it at the time. Then about 6 months after moving in the supply fuse melted, they did a temp repair then replaced the supply cable. This left me with a retrofitted trunking floor to ceiling in the staircase. I am still ragin about it to this day😂 as I spent a lot of time hiding services. There’s always something!! Cheers mate.

@SharpestBulbs 3 месяца назад

Nice billy club.

@GosforthHandyman 3 месяца назад

Perfect for this!! 👍😊

@chrisbradshaw7273 3 месяца назад

Very interesting Andy, If you were doing this for a customer, how many hours labour would you charge?

@GosforthHandyman 3 месяца назад

Including finishing it's minimum 1.5 days so it would be difficult to turn this around for a customer for under £350. 👍

@kassisaba 3 месяца назад

Hi, nice job. Did you use the same 100 grit sandpaper on the end grain fluff as well or does it need to be more delicate?

@GosforthHandyman 3 месяца назад

100 is generally fine if you're gentle. 👍

@stuartday1876 3 месяца назад

Buying a pot plant for the cable to the right? I'd have to cover that, it would drive me mad!

@fuzzy1dk 3 месяца назад

to paraphrase another youtuber, who's the aboslute tunamelt that decided to use the apocalypse finish when installing that cable ;)

@soundman127 3 месяца назад

Hi Andy! Excellent video as usual - I've not missed one for years. I need to make a meter cupboard that is about 1600 wide and 440 tall, against the ceiling. It's hard to decide what to do about doors - perhaps a single door that hinges down 180 degrees. Anyone??

@gwenscoble6229 3 месяца назад

What would you use to keep the door up, latched? It will swing 880mm from the ceiling, can you afford the headspace! I'd opt for 2 doors hinged at the sides. You shouldn't need to lower them much to ensure they don't scrape the ceiling.

@GosforthHandyman 3 месяца назад

I'd be tempted to have a removable front panel (screws or whatever) and have smaller doors for access to the meter and consumer unit perhaps?

@soundman127 3 месяца назад

@@gwenscoble6229I was thinking push latches. Good point about the swing down, it's a hall so it's not so much hanging down as the standing back! Two side hung would almost touch the opposite wall..

@soundman127 3 месяца назад

@@GosforthHandyman In my last house I made a single removable panel on magnetic catches which was great - but it was much smaller. I'm now thinking of two 800 wide doors that swing upwards like a kitchen top box. In fact, I could cheat and modify two top boxes from diy kitchens...

@firesurfer Месяц назад

Perhaps a single door would have been more practical with 180 degree hinges. Easing the edges with a cove bit or file/sandpaper would be nicer.

@TheChipmunk2008 3 месяца назад

The DNO thank you for not boxing in the cutout

@tommotube 3 месяца назад

Hi Andy, where did you get the doors from?

@GosforthHandyman 3 месяца назад

B&Q keep these in stock 👍

@EM-fh2tx 3 месяца назад

I've a similar job to do, but my unit is high up & the one bit I'm not sure of is how to fix it to the wall.

@GosforthHandyman 3 месяца назад

Little brackets or if you can fit a back you could fix via that? 👍

@horsetowater 3 месяца назад

Could dowel it too

@GosforthHandyman 3 месяца назад

Defo! I'm not a huge fan of dowels. 👍

@vtbn53 3 месяца назад

No mention of the type of MDF which is usually unobtainium

@TheDoosh79 3 месяца назад

First cabinet I made was an electric meter cabinet, I completely winged it with no knowledge whatsoever and it turned out bloody good IMO, although it was pure fluke not skill 😂

@GosforthHandyman 3 месяца назад

Fantastic stuff!! Most of my attempts are pure fluke. 👍😁

@Geoffbell01 3 месяца назад

“Cack handed” - lol

@GosforthHandyman 3 месяца назад

😂

@michaeld_aus_b 3 месяца назад

22:34 where are the noble screws ? and do these also have of house ? 😅 As usual very well done, Cheers

@GosforthHandyman 3 месяца назад

Just commoners in this house. 😂👍

@michaeld_aus_b 3 месяца назад

@@GosforthHandyman in German "noble" translates to "Edel" which is part of the word "Edelstahl" which translates to "strainless steel". So as a matter of word-punning, you surely have noble(stainless)-screws in da house. Cheers from Berlin

@deancarter4109 3 месяца назад

I’m confused did this take 3 days?

@barrydoherty636 3 месяца назад

Where would you buy the doors?

@GosforthHandyman 3 месяца назад

B&Q 👍

@davidmcarthur1093 3 месяца назад

I make these for customers at a lose to advertise the quality of my work.

@DlStreamnet 3 месяца назад

13:25 - just want to reiterate the washer comment. Great tip.

@GosforthHandyman 3 месяца назад

I should really do a vid on it at some point. 😁

@Stormin_Mike 3 месяца назад

Where did you get the doors from please?

@GosforthHandyman 3 месяца назад

B&Q 👍

@Stormin_Mike 3 месяца назад

@@GosforthHandyman Cheers

@maryb6074 3 месяца назад

Do you accept any construction job?

@markw7997 3 месяца назад

Only critism is you should of put the top piece of mdf to the end so you cant see the top of the vertical side pieces , will crack in time .

@Bob_Burton 3 месяца назад

This job was made easier by using Table saw Mitre saw Jigsaw, possibly 2 ? Biscuit jointer Multi tool Sander Electric drill Impact driver SDS drill ? To me it would have been more interesting to have seen it done using hand tools

@GosforthHandyman 3 месяца назад

Just the one jigsaw... but I did also use my track saw to cut the in-fill panels since I couldn't be arsed getting the table saw out again. There was also the brad nailer and compressor. 😉

@wyrdlg 3 месяца назад

Thanks for saying Europe! Hope the UK will come back to the EU. By the way - not metric? USA, Myanmar and Liberia! Very nice cabinet. I like how you detailed the top and the bottom. Look very much like furniture. PS Did that need no vents?

@Richardincancale 3 месяца назад

No vents needed - nothing *should* be getting hot in there

@GosforthHandyman 3 месяца назад

Thank you! We've never left Europe! Just the EU. 👍😊

@stephenreynolds1348 3 месяца назад

Some good tips as ever but did you count how many power tools you used - nine 😳 The idea that most people have access to so many tools is just not realistic.

@toddz9344 2 месяца назад

'promosm'

@Elfin4 3 месяца назад

Table saws are extremely dangerous and there is a reason why they should always be used with a saw guard no matter what cut you are doing unless you have a death wish or want to lose some digits.