No video :(

How to build Iron Man MK5 helmet

Подписаться 19 тыс.

Просмотров 3,8 млн

50% 1

Iron Man Mark 5 Helmet
Fully articulated, Wearable, Chargable.
This is the build guide for Box and Loop version of the MK5 helmet.
This guides assumes you have 3D printed all the parts.
In addition, you must have uploaded the code to Arduino Nano and wired all the electronics.
What's included in the downloads below:
28 STL files
3 Guides (build, wiring, printing)
1 Code file
1 Parts list
Download STL files, code, instructions:
www.thingivers...
OR
thangs.com/m/3...
OR
cults3d.com/en...
Enjoy this build!
If you really enjoyed, consider buying me a coffee:
www.buymeacoff...
Links for parts:
Arduino Nano (Every or not)
amzn.to/3E3Sk7i
PCA9685
amzn.to/3jsHYG8
3x4 Right Angle Male Header
amzn.to/3Ba7CFE
Wing Servo (corona ds-239mg)
hobbyking.com/...
sg90 Servo
amzn.to/3vFvX55
Capacitor (2200 uF)
amzn.to/2Zr0Q11
led eyes (flexible)
amzn.to/3Gcnr2r
power bank
www.adafruit.c...
limit switch
amzn.to/3Ca0337
power switch
amzn.to/3m3YXjJ
usb cable LEFT and RIGHT angle (for in-helmet power)
amzn.to/3GeTRJK
m2 bolt set
amzn.to/3C7NgOK
m3 bolt set (countersunk)
amzn.to/3nhn8L7
M3x6mmx0.5mm Flat Washers
amzn.to/3CazOcM
Optional:
jst connector kit
amzn.to/3EarWsG
3D printer:
amzn.to/303GYSe

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 771

@supermomandj 2 года назад

For anyone having issues with servos not triggering. Try uncommenting the commented out lines (deleted the /*) in the arduino code. That fixed it for me. Idk why he uploaded with those servos not marked to trigger

@BoxandLoop 2 года назад

That was my mistake. Uploaded the correct file today

@supermomandj 2 года назад

@@BoxandLoop awesome thanks!

@supermomandj 2 года назад

@@BoxandLoop You still have those big sections commented out. Aren't those necessary?

@user-iq2os5mx2f 2 года назад

@@supermomandj 😃😃😅😣😕😅😅😃😂😯😇😇😇😇😇😇😇😇😇😇😇😇😇😆😆😆😆😆😆😑😐😁😂😑😆😑😆😇😠😣😣 😣😣😣😣😇😇😇😇😇😇😇😇😇😇😇😇😬😬😇😇😇😇😇😇😇😇😇😇😇😇😬😇😇😇😇😇😇😇😆😇😇😆😬😊😊😇😆😆😇

@user-yq5xr3qt3n 5 месяцев назад

@@BoxandLoopplay with your own emotions to get a sense that your own emotions can change in a given moment or situation or moment of the moment or in the present

@Foshofomenko 2 года назад

Bruh I came back to this video after a week and there’s only 763k views🤦‍♂️ This happens to me too sometimes and I don’t know why, cuz like there are videos out there that deserves to be seen by millions of people.

@AlejandroFernandezC 2 года назад

Yo vengo por electronica, nose que te hace pensar que este video no valga la pena que tenga 763k espectadores

@spacerock3130 2 года назад

@@AlejandroFernandezC he said there is only that many

@claytonwoodrow 11 месяцев назад

how about 3 million?

@yatharthbasagare3631 11 месяцев назад

Make it 3.7 million

@livingturd3899 2 года назад

Cant say it enough. THANK YOU! This is how you make a DIY video. Hats off to you bro. Enjoy that coffee.

@BoxandLoop 2 года назад

Thank you

@user-yq5xr3qt3n 5 месяцев назад

@@BoxandLoop100

@Romo2055 2 года назад

this is wayyy cooler than the other mk5 helmet was being sold over the internet, and thanks so much for making this an open project

@BoxandLoop 2 года назад

Sure thing. Enjoy

@evanprieto4822 2 года назад

U are loved by God And he cares about u so much and wants u to turn to him today so that he can make miracles and Blessings happen? God loves u and the world so much that He sent his only son Jesus Christ to Die on the cross so that we could Have a relationship with him and not have to sacrifice anything and we can inherit Heaven and be forgiven for our sins and repent those sins? God has a plan for u and wants it to happen turn to him and he’ll change ur life in a better way than u could ever imagine He’s helped me with many things and will do the same to u Just turn to Him and he will give u rest and will protect u Because he wants to save u and give you his kingdom of Heaven because He loves and cares about u and died for u so that u wouldn’t have to go to Hell. God bless you and have a good Day❤️✝️🙏Accept Jesus as your lord and savior and be saved repent ur sins But it’s ur choice to make but Jesus is coming soon but it’s all ur choice to make God bless

@shyamaliroy23 2 года назад

@arnymon9340 Год назад

Its cool, but not better than one from Autoking..

@sonaliprabha2211 Год назад

@@BoxandLoop 99 ]]-

@WilliamAftonsTrap 8 месяцев назад

This is amazing! How is this not viral?!!!!

@KinghtErdan 2 месяца назад

I don't know bro

@rykas78 2 года назад

This is the reason for buying my 3D printer. this is the project I really want to do. Very congratulations for your work.. it's fantastic. Congrats from portugal!

@BoxandLoop 2 года назад

Thank you kindly

@Emoney19 2 года назад

Dang bro, you got mad skills to make this I’m impressed

@BoxandLoop 2 года назад

Thank you

@andypodmore6721 2 года назад

This is truly awesome work. I've always wanted to print an Iron man helmet since I got my 1st printer. Your very detailed instructions for printing, assembly and wiring are the most detailed I've seen. Thank you for sharing your work with the community.

@BoxandLoop 2 года назад

Enjoy and I'm looking forward to seeing your build

@felishinahmaina7724 2 года назад

@barancatibor2231 2 года назад

Iììiììiiììiiì

@BYUHighFlyer 2 года назад

Where did you find the detailed instructions for printing and wiring? Thank you in advance!

@user-yq5xr3qt3n 5 месяцев назад

@@BoxandLoopplay with your friends in a group of strangers who have been in contact

@TheVirtualTim 2 года назад

That is amazing work. LOVE the intricate detail with all the articulated parts. How does this have over 6000 views and ONLY 143 likes? And who is the idiot that pushed the dislike button?

@BoxandLoop 2 года назад

I'd like to think they just had very bad aim and meant to press like

@gergotamas9576 2 года назад

🤑🤑🤑🤑🤑🤑🤑🤑😝😝😝😝😝😝😇😇😇😇😇

@jackofspades3845 Год назад

Don’t worry about it, this vid got its recognition eventually, still not enough but…

@Nboudreau22 Месяц назад

I can't believe this is free for the community. Amazing.

@biggboijonns4727 2 года назад

SOMEBODY GET THIS MAN AN AWARD

@gabbylikeskicks 14 дней назад

Makes you appreciate the inner workings of mass produced helmets like Autoking. And how it can be very frustrating if you're just a collector, and one of the helmet plates just stopped working as intended.

@oscar8389 2 года назад

So much work went into this, you did an amazing job, better than I could ever do, it’s just incredible

@3DGeekShow 2 года назад

It was my dream since I started on 3D printing 5 ears ago! You´re my hero!!! Thank you! I just buyed you a coffee!!

@BoxandLoop 2 года назад

Thank you very much. Enjoy

@rapidextecnologia7413 2 года назад

agora a Geek faz ela pra nois la.kkk

@bullygarfield1528 2 года назад

*bought

@diepommes8082 2 года назад

I am German

@claudiodalton 2 года назад

Ola Murilo, tudo bem? por acaso voce fez ajustes na escala do capacete ? um abraço

@a.r.278 2 года назад

I can’t handle how cool it is

@huureencasino 2 года назад

just incredible what people can make. Very nice job

@user-qq6he9nl1q 2 года назад

You are the next Iron Man hero.

@Damnkarma 2 года назад

As a mechanical and electrotechnical engineer I have to say u did a great job. But dud that was a lot of work 😱

@BoxandLoop 2 года назад

Thank you. And yes it was too much work

@PurpleHelmet 2 года назад

Wow. I'm still working on your MK3, I guess this is my next big project! Can't express enough my appreciation for you sharing this openly!

@BoxandLoop 2 года назад

Enjoy! That's why I make these

@PurpleHelmet 2 года назад

@@BoxandLoop how long did it take you all in? I mean there's the 3D modelling alone - but then working out the circuitry, the code - and also the instructional side, making video etc Huge amount of work!

@BoxandLoop 2 года назад

@@PurpleHelmet 2-3 months in my free time. I enjoy this kind development, so it didn't feel like a lot.

@user-yq5xr3qt3n 5 месяцев назад

@@BoxandLoopp 😅😮will have 😢😅😮😮🎉🎉🎉😊

@AlexPettit7 2 года назад

I literally just finished your other one and now I am going to have to do this one lol. Definitely a design improvement as far as assembly!

@BoxandLoop 2 года назад

Excellent

@evanprieto4822 2 года назад

@@BoxandLoop U are loved by God And he cares about u so much and wants u to turn to him today so that he can make miracles and Blessings happen? God loves u and the world so much that He sent his only son Jesus Christ to Die on the cross so that we could Have a relationship with him and not have to sacrifice anything and we can inherit Heaven and be forgiven for our sins and repent those sins? God has a plan for u and wants it to happen turn to him and he’ll change ur life in a better way than u could ever imagine He’s helped me with many things and will do the same to u Just turn to Him and he will give u rest and will protect u Because he wants to save u and give you his kingdom of Heaven because He loves and cares about u and died for u so that u wouldn’t have to go to Hell. God bless you and have a good Day❤️✝️🙏Accept Jesus as your lord and savior and be saved repent ur sins But it’s ur choice to make but Jesus is coming soon but it’s all ur choice to make God bless

@DoctorNOS 2 года назад

Nailed it again!!!! Loving it!

@BoxandLoop 2 года назад

Thank you

@DoctorNOS 2 года назад

@@BoxandLoop for sure. I really love you work!!!

@DALILOMODIY Год назад

amazing! thanks for the files

@akashdeepthapa1265 2 года назад

Finallllyyy... was waiting for it... from like eternity. Thank you sir

@BoxandLoop 2 года назад

Enjoy

@Thatguy-uc3dy 2 года назад

that is very impressive, I salute you for your ingenuity sir, you're truly remarkable.

@BoxandLoop 2 года назад

Thank you

@jeremiahhardge6968 2 года назад

You are a true blessing to the 3d printing community. THANK YOUUUUU been waiting for so long for this XD

@BoxandLoop 2 года назад

Very kind of you

@likesapporo302 2 года назад

Great.. with all the 3D printing, the wiring and all the measurement.. hands down..

@JohnBrown-cn8xg Год назад

That's the coolest Ironmanhelmet I've seen so far. Fantastic job!

@tapati8467 2 года назад

this gota be the coolest helmet ever and u gave the files for free tysm ur a real one

@RonaldFinger 2 года назад

Very cool, my dude! I've been following your progress on reddit. Awesome to see everything done.

@BoxandLoop 2 года назад

Thank you!

@hockeysockeys5323 2 года назад

Cool

@MHArtStudio 2 года назад

Well, you also have a pretty great 3d helmet model) Unless I had to adjust his visor a little on the Silver Centurion Mark 33, since he has a tilt closer to the eyes from the very top of the visor to the eyes) And so everything is fine! 👍😊

@user-yq5xr3qt3n 5 месяцев назад

@@BoxandLoopcome to think about this and see what you

@GangStar_6 Год назад

Time to buy a 3D printer because this looks fun!

@grant-hypercuber 2 года назад

Time to find time to upgrade my mark 3 helmet!

@fazrulrusdi3709 2 года назад

Why there are still dislike.. The helmet is total genius

@haz2968 Год назад

All you need is a basic understanding of electrical devices and a 3D printer. I have one but I'd rather not say which

@tobintek2140 2 года назад

Should the TX and RX lights on the Arduino Nano Every be blinking when the board is powered. Mine are off and I think this may be a reason it is not working for me.

@underourrock 2 года назад

I'm tempted to do it without the electronics and going around and asking if anyone has a mini arc reactor they can spare. Kidding aside, that's really awesome and you're awesome for sharing this. Tempting to do this on a SLA printer, prime, paint, and clear coat it for that extra bit of pop.

@glp.1337 Год назад

What SLA printer will be able to print those big pieces? If you want a shiny glossy finish, just sand and paint it.

@underourrock Год назад

@@glp.1337 tons of them can do it. The only difference is how.

@glp.1337 Год назад

@@underourrock "tons of them can do it" Can you name a couple? I'm curious.

@underourrock Год назад

@@glp.1337 why? Anycubic has a bunch. If it's too small to print as one piece epoxy it together and sand. Just like sanding out lines... People have made some very impressively large things with small printers. For me, I would do it with one of their larger mono series or the m3 max. Again it more about finding a way to make it work.

@glp.1337 Год назад

@@underourrock Well if you go for Anycubic, you'd have to cut them up because they can't print that big. And if you already have to cut them up and sand/epoxy them together, why would it be beneficial to go for a SLA printer? Wouldn't it be more efficient just to print the big pieces in 1 piece and sand/paint them to get a smooth finish? That way you'd get that "extra bit of pop" as you call it, but just a lot quicker.

@3DPDoctor 2 года назад

congratulations! I will build one asap haha :D

@BoxandLoop 2 года назад

Looking forward to it

@danielgonzalezruiz8562 2 года назад

I have just seen the hole video and I think you are the best artist I've ever seen

@blooddeep7666 2 года назад

this helmet is something amazing i'm a big fan of iron man and i'll buy myself a 3d printer soon i wish you good luck🙂

@Markiplierforreal 2 года назад

Got it yet?

@MHArtStudio 2 года назад

The helmet really turned out to be very cool! I had a similar idea about a year ago, but I didn't have time to implement it! I'm glad you did it! 👍😊

@IronMan-jj2fd 2 года назад

It looks great & all! But there's a thing called form & function, certainly the faceplate foldings been overdone here, as it doesn't add up major function to it, cuz it doesn't reduce the faceplate area overall that much.

@NADA-kv7ez 8 месяцев назад

That noisey servo either try replacing it or put a ferrite ring on the servo lead, great job and thanks for the post

@jessiewald1 2 года назад

Amazing. Have you ever considered electroplating it to give it a metal finish?

@BoxandLoop 2 года назад

Not even sure where to start with that. Suggestions?

@SaturdayMorningProps Год назад

Goodness I'm so over the ASMR trend 😑 would much rather an actual explanation. Great work on the assembly

@meralkaya144 Год назад

@user-yq5xr3qt3n 5 месяцев назад

The most common type is an English English translation or a English language version that has been used for the last two centuries by a group that was known for their own

@memes16376 Год назад

if I built this the FBI would put me on a watch list

@onebg3450 5 месяцев назад

Chun lee the fuck u say?

@kirisakiwr 2 года назад

This Iron man fans are talented great job

@NateNastys 2 года назад

I just started to print your previous helmet and I'm 30 hours in and then you release this....FML!!....🤷‍♂️

@BoxandLoop 2 года назад

Twice the fun

@christiane321 6 месяцев назад

I appreciate you sharing your files for free, I made 2 Iron Man Helmet's and learned a lot. I bought you coffee. Mahalo from Hawaii! shaka bruah

@stevrgrs 6 месяцев назад

This looks AMAZING! I haven't seen any that have the additional parts popping out to the sides. That's an AWESOME touch ! Well done :D

@barryfredette7266 2 года назад

Far cry from model airplanes, most to worry about was get the decals off the paper,, but to think there was still room for your head! 😲

@THEBACKYARDELECTRICKS 2 года назад

Thanks for this model my friend. I'm definitely going to build this. 🤗

@BoxandLoop 2 года назад

Looking forward to seeing it

@cody2662 2 года назад

This is fantastic, I bought you a few coffees sir. Is there a suitable replacement for the wing servos? The ones on the parts list seem to be back ordered everywhere

@BoxandLoop 2 года назад

Thank you kindly. Let me look around, hopefully there are other sources

@aidenfindley8565 2 года назад

I’m having the same issue finding them, could the model be adjusted for a mg90s servo?

@cody2662 2 года назад

@@aidenfindley8565 I found some at aloft hobbies

@aidenfindley8565 2 года назад

@@cody2662 did you go with the same ones he had, they’re pricey

@cody2662 2 года назад

@@aidenfindley8565 I did. I think you need those because the faceplate ends up being pretty heavy with all the wiring and other servos

@mueble 2 года назад

Awesome, you are the real Tony Stark

@gunnarbeddoes13 7 месяцев назад

I am not very good with setting things up especially electronics is this hard because it is Awsome

@tuckertidwell9582 2 года назад

This is awesome better than buying one just needs sanding and painting

@jiasheng9926 5 месяцев назад

It seems great working but the only shortcoming is the mask did not reveal upper( if for wearing), from the video it looks like the mask's chin will only reach human's eyebrow.

@max62942 2 года назад

Nice Projekt, i built one Last year, my Goal was to make the opening very large, thats the only downside i can see on your Helmet

@BoxandLoop 2 года назад

Couldn't agree more

@fantapro23 2 года назад

@@BoxandLoop AHHHH! (Screams from pain)

@gman4155 2 года назад

Instructions show 26 gauge wire. Has anyone used a different size like 24? Which works best, stranded or solid? This is amazing work and I am ordering some blank pcb boards and wire to practice my soldering.

@BoxandLoop 2 года назад

Gauge not so important, but go with stranded over solid for this build

@cgrosbeck 2 года назад

Bad ASS designing!!!!!!!!!!!!!!!!!!!!!!!!!! Cant think of anything else to say other than blown away.

@miguelmflowers 2 года назад

I was wondering, after all the cables and wiring, was there still a place for a head inside? Kids head maybe? You did awesome work!!

@Dinnerbone2071 2 года назад

It says in the description that it’s wearable

@AllenRJoseph 2 года назад

I was waiting for this for a looooong time. thankyou soo much and good luck with everything you do!

@BoxandLoop 2 года назад

Thank you

@noahsooley7016 2 года назад

Amazing design! Just one question with regards to wiring. What parts will have to be soldered vs using a jst connector. Still pretty new to a lot of this sort of stuff so guidance would be greatly appreciated!

@ekosusilo6240 2 года назад

Jbbv

@Ultramarathon_Wolf 2 года назад

So did the mini usb cable come with something from the parts list or do you need to buy it separately? I’m not seeing it anywhere. Please reply. Also, do you need the connector kit? It said optional.

@noahsooley7016 2 года назад

@@Ultramarathon_Wolf I actually completed making this a while ago. The usb left and right cables need to be bought, I believe there are listed in the parts list. As for the JST connector kit, it isn't needed but it is very helpful if you mess something up. If your just solder all the wires together it can be messy if something is not attached quite right. That being said there was still a lot of soldering such as the angled pins that feed into the board that drives the servos etc.

@thebigdr 2 года назад

I just can't get a good print on the large face part. Keeps coming up like shredded wheat. Now I'm trying to thicken the walls more

@GLeAnimal 2 года назад

Mantap bos sama topeng nya bisa untuk bongkar pasang ku semangat trus slam sukses selalu hadir menyimak bos ku

@TagCashDev 2 года назад

It's amazing what you've created!

@TheWoeggil 2 года назад

Ho ly hell. Looks a lot easier in your testing vids. Now with all the wiring and tweaking involved. Hats of to you!!! Would you consider uploading a model session in blender? Can be raw. I would like to learn how to model multiple part assemblies with precise measurements involved (servos and so on)

@BoxandLoop 2 года назад

Thank you. You'd think precision is important here, but with 3D printing the tolerances are quiet large. It's more about trial and error

@TheWoeggil 2 года назад

@@BoxandLoop thanks for the reply. But how do you create or import the measurements for the mounting points? Are those also trial and error?

@shreyashwankhade1517 2 года назад

Yehh plz tell me more about the measurements how do you precisely do that

@BoxandLoop 2 года назад

@@TheWoeggil calipers help a lot. Print, try, measure again, redesign, print, try, ....

@omarmirzaa 2 года назад

Craftsman ship at its best. Bravo!

@kazuts7237 2 года назад

it's wonderful beautiful work 😱 I wanted to know if we could wear it or if it was necessary to increase the size in cura ???

@BoxandLoop 2 года назад

Thank you. There is a "cage" to test fitment. As of right now, it's not possible to resize

@jeffexplorer 2 года назад

Finally...thanks for it, that's awesome...

@dash6544 2 года назад

Awesome project! Anyone know if this helmet is wearable? Looks rlly cool but a lot of tech inside and idk if you would still be able to fit it on

@billytk1225 Год назад

I love how he covers the wires (some) with plastic guards or foam, but doesn't bother to put any sort of protection over the (2) capacitors on the boards. I would not trust wearing this helmet with those capacitors exposed to my head unless you like the possibility of being shocked or burned.

@r3e3ekid65 2 года назад

does it fit on your head because I consider making it...

@sebastianpotocsnyak328 2 года назад

Excellent work, congratulations, I make a query, could you share the movement diagram that you used to load it to the arduino nana board?

@BoxandLoop 2 года назад

Absolutely. Check the links, there are guides and code for everything

@jatinsakaria4088 2 года назад

Wow!! You should make more of these and sell them you could earn a lot of money

@Crashtopher 2 года назад

Is there any video of anyone wearing this somewhere? I'm curious about how comfortable (or not) it is and if maybe adding some foam or padding for comfort in key areas might be a good idea or not. Incredible work. You've somehow translated computer generated imagery into physical reality.

@BoxandLoop 2 года назад

Thank you. Depending on size of one's head, you can add padding or not

@euphoricliving7851 Год назад

You need to show or provide a link on which wires to attach to the arduino

@HallowzDev Год назад

There is a wiring guide in the description

@noah_g 2 года назад

This looks really cool!!!! I 3d printed a Mando helmet and need another project.

@BoxandLoop 2 года назад

Give it a go. Step by step guides are here to help you

@jasonvorxis 2 года назад

Thank you a lot, the coffee is on me ❤️

@tinesalamon3303 3 месяца назад

Do you have to cut those white arms that came with servos to fit the printed servoArms?

@itsKeNeTiC 2 года назад

This is incredible. Just curious as to know how much that cost? Excluding the cost of the helmet, just the wires, power supply, screw and everything for the working of the helmet? It would be amazing if you could let me know. Thanks so much in advance

@BoxandLoop 2 года назад

About $110 for electronics, depends where you shop and where you are located

@itsKeNeTiC 2 года назад

@@BoxandLoop I’m in the United Kingdom. I’m currently planning and pricing the different stages of a full suit. This video will help massively. Engineering at its finest

@BoxandLoop 2 года назад

That's awesome

@omerkrsvr 2 года назад

best of all helmets ever made. you worked hard but it's perfect. thank you!

@BoxandLoop 2 года назад

Very kind of you

@claudiodalton 2 года назад

Good afternoon, and congratulations on the design. I have a question is re-sizeble ? I say this because it has the drilling of the components. thank you so much

@curlypatch1391 2 года назад

Just wondering if there's an alternative for the wing servo now. Looking at the prices online, they seem really pricy :')

@abcd.efghi.84e1 2 года назад

Ngủ

@AsusrogzephyrusduoOG Месяц назад

Need help with alternative dome02, you dont have pictures for that one and how things install on this version.

@AsusrogzephyrusduoOG Месяц назад

@boxandloop you alive still lol?

@davidschulz7352 2 года назад

Love the project! built it myself, wiring and all. however I'm having trouble with the coding. I have the code downloaded to the Arduino however the servo states seem to be switched for some of the servos. as when its suppose to be close some of the panels are open and when its suppose to be open some of the panels are closed. any recommendations on how to fix the problem??

@eusebiovelasquez6546 Год назад

extraordinario si tubieras el stl y los planos electronicos para compartirlo te lo agradeceria mucho

@mangofandango2845 2 года назад

No doubt: This is incredible. I've started printing but what code do I need for the arduino nano?

@BoxandLoop 2 года назад

Check the extra zip file

@nadavavriel2570 Год назад

Hi can you please send all the electrical parts the wires and the model you used for the helmet?

@3D_dreams 2 года назад

Thanks for the awesome design…can’t thank u enough…..

@BoxandLoop 2 года назад

Enjoy

@KinghtErdan 2 месяца назад

Your project is very interesting!👏

@trevordwyer7930 2 года назад

in step 4 of the electronic guide - how is the capcitor wired? is one side in the GRD and the other in VIN?

@BoxandLoop 2 года назад

Correct. Capacitor also has polarity, make sure to connect properly

@MBYTLIVE Месяц назад

Can anyone help me to do this I am from India and I don't know how to print these parts from jlcpcb. Please help me..And how to code that motors(servo)... Please make a full video and explain. It's a request 😢

@easy_3d Год назад

That is some amazing printing and technology combined❤️

@peterbatt1494 2 года назад

Solved with your new code on the main brow on with the build many thanks

@cromagnet6011 2 года назад

I absolutely love your work and am ecstatic to see that you made all your guides and blueprints public. My only issue is that on your wiring guide, you list several wire lengths at 60mm but in the images you included, they look a lot larger than 60mm. Is it just the angles or is there another size I should be using?

@BoxandLoop 2 года назад

Could be just the angles

@gordonramdrip2984 2 года назад

It would be cool if you can wear it Great video by the way

@BoxandLoop 2 года назад

Thank you. And yes, it's wearable

@marawanharraz2310 2 года назад

DAAAMN, That was freaking AWESOME. But why it make the buzzing sound when it's opened?

@BoxandLoop 2 года назад

Servos have to stay on to keep everything open

@marawanharraz2310 2 года назад

@@BoxandLoop ohh yeah thanks

@lakemast 2 года назад

Really awesome! Thank you very much!

@iloveyou-rh1xq 2 года назад

how do u get this to fit on your head fho

@jesterc.6763 4 месяца назад

It fits just fine, actually. I even got to put bluetooth headphones in.

@Flexciuz 2 года назад

Could you specify how many of each thing I need to buy in the description? 😍

@BoxandLoop 2 года назад

It's on the excel file

@MirkoDiLodovico 2 года назад

Man, you are AWSOME!!! this project is so cool!!!! but i can't find the "cage" stl, the code file and the 3 guides. i downlod the Zip files form "thangs", but inside i found only the STL file. could you help me?

@BoxandLoop 2 года назад

On thangs there is a link to extra files separate