How to Build Timber Wall Framing | Mitre 10 Easy As DIY 

You need your own tv show. Clear and to the point.

This channel is absolute gold!

I've watched this video like ten times, and I'm attempting to do this tomorrow 😅

Brilliant demonstration. Great to see a pro in action. Now its my turn! Hahaha!

Great as always. Keep it up !

I love your videos and your channel!

Well done, I really like this channel!

What a legend! Awsome content as usual. Cheers

this is excellent, thank you

I did 622 and X back. Use the 6 times table or 4 times table if 400 centres. 622, 1222, 1822, 2422. Felt it easier than going 1778 plus 600. Thinking about it as I'm writing maybe it's just because I like adding even numbers together as opposed to adding an even number to odd number in the 100th numeral position.

good chanel blessings from Dallas Texas Unites States.

Love your work

Great video, thanks!

Great video for DIY

You have a good channel brother

You give me the confidence to DIY

Excellent, thanks

its built too perfectionist.

Cheers from Australia, fellas. Exactly what I needed...

90mm flat head nails. Thanks for explaining what nails to use, surprisingly difficult to find a video which mentions it!

Thank you

Thanks for this video I finally know what's wrong with my studs. I thought the 600mm wall brackets sold in hardware store are useless because one end doesn't hit the stud as it is short. It's because the guys who did my framing measured 600mm instead of 578mm distance between them. 🤦🏼 Also my house is 2.7m high but only has one nog in between them and are not place in lined with one another 🤣

Hi can you make a video about installing new door please

Awesome

Really clear and concise. Thank you. just one Q. I have another shorter wall framing I'm going to attach perpendicular to this frame. Any tips on how to plan and attach?

Great Video! Do you have another video for a stud wall that has a corner? So a short stud wall from a main wall, then another at right angles to that to the next main wall?

Still think you should have squared it up first, less stress on the timber that way but that’s just me. Other than that, another class vid.

how did the other side of the noggin get fixed in if they were all level? I can't see how unless angled in? would it be easier to offset them slightly instead?

Love the video! I want to build my own bathroom essentially by simply building a four frame wall fixed together and celiing. I'll let the plumber fit the shower, basin and toilet but as long as can build a nice small space that can comfortibly contain these admendities that would be great. I assume I can use the same princaples as your videos and take into account I am using siding that is water resistant. Any suggestions?

Great video. What if i want to build a shed (5x3m) in the same style? Can i use this framing style?

Very handy - does this video come with subtitles ;)

not understanding nogs at 800 when gyprock is 1200 wide can you explain ?? cheers JIM

If this is built tight, floor to ceiling, you'll not lift it into position, because across the corners will be longer than the vertical height...! Wouldn't you need to build in-situ? If so you'll need to tosh/diagonal nail the uprights.

10/10 for accent

What additional work would be required if this was to be made load bearing?

If my concrete foundation is not level perfectly ...? How should I put the sill plate

These guys are really professionals,I am sick of watching back yard amateurs on you tube

Interesting that in NZ the noggins are continuous in line, not staggered. Is that code? Harder to nail in.

just found your site please keep showing how new zealand do it thanks. subtitle too big.also what type of wood are you using.??

Yeah, choice cuzzy bro

What size measurements is the timber in this video?

Is the door way width and height same in Australia?

what size timber did you use

Wish they taught the metric system when I was in school.

Ummm...aren't the nogs meant that be placed staggered in order to get all nails in?

Marks understud on top plate knowing it sits under the lintel..lol

What's the dimensions of the timbers that are used?

Not sure, can anyone clarify. I am a total novice at diy and thought this video would help me to build a simple wall with door in my garage. I watched the video 10+ times, measured everything twice, listed the materials and purchased everything to begin the project. It all went so well until the lintel. It didn't fit, it was too wide to allow for the finishing board, in my case plywood to have an even finish. Following the video it appears I have ended up buying the wrong size timber for the lintel. On the video the builder says at 9.28 mins the timber for the lintel is 150 x 50, so thats what I brought. Checking much later after much frustration the PDF file with written instructions says the lintel is 140 x 45. The builder should really have got the size exact and right in the video. You can see in the video at 10.06 the timber he used was an exact fit. Mitre 10 does it again?????? open to your comments.

If you're looking to square your wall @ 10:51👍

Americans call them sheer blocks because they add sheer strength

Didn't show how nailed other end of each noggin in. Assume did an angle nail in. Show whole process .This supposed to be a diy video after all. For mugs.

He takes time to square his wall up, then without putting in bracing to secure the squareness he lifts the wall up and moves it. Why bother squareing the wall in the first place if you are not going to brace it ? This must be NZ building codes to allow for earthquake zones - loll.

Same OK j in

You didnt show us how to nail in the nogs after the first one, !!? you obviously cant nail in the second one and all others from the side, because the other nog is the way, so you either have to off set the nogs or how to nail them side by side pls

1st comment

This guy doesn't know what he's doing! His measurements for his blocks ! " He calls them nogs" should have been taken either at the bottom plate or the top plate not mid wall !!!!!