Just bought the winning ticket for the pod, and you probably know the paslode can be adjusted on the end to take account for different nail sizes. I’m watching this for the crac, love it, keep up the good work. Best to keep other hand well away from nail gun when firing, trust me .
It’s mind blowing how someone would take time out of the’re day to leave a comment that is only suppose to be hurtful. It must suck to be that guy!!! Love the videos and think you are a good group. Would have you round mine for a build any day..
Love your vids….you’ve got a good team and your highly intelligent you all deserve to be nominated…you and your team go through the build and make a lot of sense cheers for everything you do for your subs…EXCELLENT CONTENT from Burnley 🙏👍💙❤️ This is all free information….how can you hate on this👍🙏❤️💙
Q. Any advice on buying a nail gun off marketplace? What to look out for and what to avoid? Thanks for this series of videos and I would recommend the build pack to anyone thinking of building a garden room, it’s very detailed .
Loving the videos Liam and the team. I've voted for you sometime ago but don't think I've bought a raffle ticket for Pod/Money so will do so today. Looking forward to Day 5.👍
If brains were dynamite that troll wouldn’t have enough to blow his brains out,your vids are appreciated by an awful lot of people,more power to you and your team 👊
Was gonna ask after your last vid why you don't use 90 ring shanks. Think you may have just answered it. I'm assuming it's cause of the lack of power in the paslode? I've got an old paslode and it doesn't have an issue with them 95% of the time.
Big roscoe is an anagram for F*T W***ER I think? Shock😮 lol😂 seriously though Liam can you stop throwing my soon to be new hammer around your making it dirty ! Great video as always loving the detail thank you for doing these. Already voted your gonna win the award...
Liam, these are the best tutorials for people like myself who are considering building my own building, keep up the great work, loads of people love what you do.
Only just seen this… thanks for kind words and keep up the good work. Yes I’m in london but if I am ever in Leeds I will definitely come find you for a catch up💪🏽
Hi Liam, John, Davy and Jen - the guy who worked in an office doing computers is me 😂 Built my own over 2 years ago after watching your videos and loved every minute - even lifting a 22mm osb boarded 4.5m rear wall 😅 Jen has some strength! If the knees and belly slow you down one day then teaching the next generation of builders is not a bad legacy to continue. Loving this detailed series and the more relaxed “fireside chat” explanations. Keep up the amazing videos and content! Raffle tickets purchased already and vote cast!
Your content is great fuck all the haters why would you hate on a channel giving you so much free information makes no sense. Keep up the amazing work ❤
Been watching many of your video and they are the best on the internet so easy to understand and follow for us simple DIYer’s - Thanks so much to you and your team. Will be building my bespoke Garden House in the new year 2024.
Great video. As with others wouldn’t give the guy the time of day. As you say if he doesn’t like the video just watch something else. 🤔👍 Which Milwaukee gun was it? Presume Fuel first fix? Thanks again for you excellent content! 👍⭐️⭐️⭐️⭐️⭐️
Hiya guy's having been in the building trade for 35 years doing suspended ceilings partitions and dry lining I can relate an awful lot as to setting out and openings for door's and windows etc to sit and watch quality tradesmen work such as yourself is a pleasure keep up the great work guy's brilliant. On the losing money side it's a fact if your training someone the ropes it slows you down therefore costing you money been there done that FACT so totally ignore the mr big (twat) he's not got a clue look forward to seeing more from you.
Liam and gang. Really enjoying these videos, keep it up. So informative. Will definately be purchasing a build pack as soon as I know exactly where the other half will let me put it and what size we will require. Would it be possible at sometime to see photos of Garden rooms that other people have built going off your plans, that is if anyone has sent them in to you.
Hi Liam, im fitting a shed/pub/office based around your videos....im not sure if youve done a video an ive missed it but im having french doors leading to a decking area, all the same level. How do you protect the internal floor from possible water ingress?? Keep up the good work!!! Cheers
have you ever thought about putting some links for the tools and materials your using in the video description.... 👍 (edit) your a credit to your trade ..
Slow down, you? 😂 You always do everything at 100mph😂😂. Good to see you back in full motion mate. Keep up the great work buddy and ignore the trolls. 👍👍
Hey up Liam , met you a couple of times pal , both at shires and toolstation and you seem like a top bloke to me , so ignore the negativity from these trolls and keep up the good work and content dude 👍👍👍
Never get bored of your tutorials. Always see something that I can use in every episode. Most of it is repetitive but in no way boring but now and again, I call it the “Golden Nugget Moment” is something that really helps in improving my technique and also speeds up my D.I.Y efforts. So much knowledge being given for FREE from both you and John and I never get why people have to chip in with inane comments every time. Keep up the great work mate
Q. Liam - I want to get a stand bi-fold from Express. Can i pre-order the steel knowing the bi-fold size? Anyone got recommendation for a company that delivery nationally (Or Peterborough area)?
I'm unbeleavable happy with what you bring as content, how you explain things, your energy, the kindness in which you work with your team. Your team is also lovely and skilled. If I would have lived in your surroundings I would love to work for you. Would not disappear without notice :p ! I have followed Robin Clevett, but his video format is just not what I like. So I watch and enjoy your videos. Thank you and your team for your kind and charitable means of charing your knowledge. One Question: "I have a shed that needs to be replaced. It has a concrete base and has already insolation in it. How to finish that floor? How would you construct and build that so it will be comfortable and neat?"
Absolutely love these videos. I'm half way through my first cabin build in the Tasmanian mountains, and I've used a lot of techniques that Liam has taught me. It's great the way you present with minimal edits because I feel like I'm right there during the whole build. Great work team and thank you!
Another Q. Minimum width from main wall to bi-fold? I was thinking 400mm gap plus wood required, would that be OK? (5M do not want the bi-fold in the centre)
Honestly, Liam, you and you team deserve all the praise you can get for the high level of free tutoring you put in all your videos! I’ve watched basically all of your videos without even intending to build a garden room of my own, just because I admire your craft, the attention to detail and quality of the garden rooms you and your team have built over time! And I am grateful for the time you take to edit and upload the videos after a full day of work! And your dedication for charity on top of that is also outstanding. So: thank you very much for all the effort you guys put in every day! Greetings from Germany 😊
Hey guys. Love your work, when you board the inside I noticed in your other building videos that you put some sort of sheeting up before your plasterboard, can you give a bit of an insight as to why and would you be able to replace this step with moisture resistant plasterboard in my own building, I realise it might be more expensive in the long run. I have a joinery manufacturing business in Scarborough and if your ever in the area and need anything custom I would love to come and meet you guys. Keep leading by your high standards it’s amazing to see
Hi loving the tutorials do you ever or could you PU glue all the walls as I live in high area with considerable wind so would it aid movement and creaking? Thanks in anticipation of your help
I'm thinking about building a kite shaped garden room due to the shape of my garden. Any tips for an odd shaped garden room like this? And how much use would a build pack be for a room this shape? 2 long sides are approx 5m and the 2 short sides are approx 2.5m. Doors on one of the long sides. Keep up the fantastic work team!
You & your team are absolutely brilliant!!!! A refreshing change to see trades people “get hands on & stuck in” & the viewer can follow your thought processes!! Just Ignore all the ar*eholes & keep up the good work!!
Mate your videos (and this series in particular) are absolutely brilliant 👍 How you can be 'trolled' by anyone is beyond me... your giving out superb free advice so thank you for that on behalf of all intelligent (or at least semi intelligent) viewers. Voted for you in the awards so good luck with that 👍
I bought the silverline gun for all my framing and can attest it has been great for a DIY project. friend gave me a compressor so for the cost of the hose and a 90 quid gun couldnt beat it.
Part 4 : Another great video. Can I ask when fixing the walls to the floors I notice you screw down through the floor randomly. Isn't there are risk if you fix more towards the inside of the room than the outside you may miss the floor joists and only get a fixing through the flooring? Keep up the great work guys. 👍 👍
Question: I want to use my garden room as a gym… with heavy weights and equipment in. Over 400kg of iron weights alone before any equipment is in there. Would you recommend the rod system for a gym with heavy weights and equipment? What about the floor joists? Or opt for a reinforced concrete pad? Great videos 👍🏻
Hi guys loving the series I bought a 5x 3 garden build pack from yee a few weeks ago, I’m in Ireland and the shopping list makes sourcing all the materials so much easier, its excellent value at 96 pounds one quick question I’m cladding the back and both sides in metal clad can I fix the clad to the timber slate battens rather than buying the resilient bars as I already have the timber battens so trying to reduce the overall costs keep up the good work 😁😁
Greta info. The only thing I didn’t see you guys do that I did (when building flipping thousands of stud walling and fitting timber joists pre TJI’s) back in the day is back the timbers (camber all running the same way). That aside quality work guys!!
Mate! Pay no attention to such people he is jealous of you obviously. There are people like myself who watch your videos like The Game of Thrones 😂😂😂. You and your team are doing a great job. I have learnt a lot from you and always look forward next episode. Keep up the great work and thanks once again for putting so much effort to record and upload for us.
If you are looking for a paslode that works in colder conditions, you need to take a look at the i-series paslodes. They have what they call, cold weather performance. And will supposedly work down to temperatures of -15 however they do use different nails and gas cartridges, which are almost twice the price of the ones for the 350+
Morning Liam and the rest of the great team that you employ and need to be paid etc etc etc as an employer you need to make money to keep the employees paid as for that genius without a brain , no more airtime is needed point made by you Carry on building great team applause to all of you 👏👏👏🫵🍻
