No video :(

How to bypass BMW occupancy sensor just for 0.01$

Подписаться 316

Просмотров 119 тыс.

50% 1

Bypass occupancy sensor on e36 e39 e46 just for 0.01$
Required items:
1. 1 x 4.7k Ohm resistor
2. 1 x 1N4007 diode
3. Glue gun
After assembly of occupancy sensor, just connect it to car and airbag light should disappear. If not, connect to diagnostic cable and erase airbag faults.
For information: With this setup diagnostics show that passenger seat is always occupied

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@stephencooper5622 5 лет назад

You are awesome! This totally worked on my current e46 project, and I can’t thank you enough!

@migelprager1097 5 лет назад

mate, just made this trick last night and the dash light is gone! still some error is stored after clearing them with PA soft, but I passed the MOT in my country ... youre the best :)

@denisohbrien 7 лет назад

To everyone asking, look under your seat, if you have a black box with the blue and white wires this will work, if you dont, your on the newer system and you will have to get a bypass box. readily available on your favorite auction site.

@sumindatube2142 Год назад

Working perfectly. Many thanks for the video.

@tonyburdett40 4 года назад

i followed your video step by step. and it worked. many thanks.

@low_lyfe2477 6 лет назад

Thanks! Worked on my 06 750LI (e65/e66).. Code 9763 for SSFA: Open circuit seat occupancy detector driver, is now gone...

@low_lyfe2477 3 года назад

@@nogoogle8498 Honestly, I can't remember. I sold the car a year ago. Keeping it running was out of my budget!

@vladasofranic3633 7 лет назад

working on my 39 thanks

@kuma0736 6 лет назад

It works fine on my E46 330CI 06/2002, no more airbag light. Nevertheless I hope this change will still allow the passenger airbags blowing up in case of accident.

@LockDots84 6 лет назад

It should considering the car "thinks" there's someone sitting in the seat with this mod.

@rusolinio121 5 лет назад

Looks like the large blue cap on the pcb blew. Would it not be a better fix, replacing that component instead of bypassing?

@Sothineathden 3 года назад

FYI, It’s not working for my E60 525i 2005 after bypassing it with this method. The restraint system faulty is gone but now I have got the front passenger airbag faulty on the screen instead.

@tsohobmwzaria2 2 года назад

the stuff works fine

@mohammadalawneh8062 2 года назад

Thank you, Can I do the same for the driver's seat

@suleimandc 7 лет назад

Great video!

@Hutchy45445 4 года назад

Great video. Any idea how to accomplish the same on a 2007 Pontiac Torrent? 😁

@LockDots84 6 лет назад

Does this trick the car into thinking there's someone sitting in the seat all the time or absent from it?

@e36fanatics 7 дней назад

It's tricking it into thinking it's occupied at all times... The airbag will blow even if nobody is sitting at passenger seat

@erdemkarabacak2183 9 месяцев назад

Merhaba 4.7 yerine 4.8 4.85 resistör taksak soeun olur mu

@joachimjohan1215 5 лет назад

how do i check if the mat is ok without scantool readings...?

@3alaaa 4 года назад

4.7 kohm resistor 1n4007 diode

@miro4463 7 лет назад

aftet this, no error anymore, but seat belt light ligts all rhe time if there is no passenger

@huntergarner300 6 лет назад

what car do you have? did you solve this?

@GaragemdoBuda 6 лет назад

perfect look !

@cipriancostinstoica740 4 года назад

is work for e46 2003 ?? no need rest from pc ???

@albleo2846 5 лет назад

33/5000 Is the correct resistor 4.7k or 47k?

@huixinn2983 4 года назад

4.7k ohm

@samokane6624 7 лет назад

will this work on an e46 and when you start the car will the light come on then go off again or just stay off

@euguimonroy9922 7 лет назад

can this work on 120 i serie 1 2009 BMW ??????

@jccleung1328 8 лет назад

would it work for E83 X3?

@allanasi2555 8 лет назад

is this works on 2005 e60 ?

@witoonkumdang1404 7 лет назад

Satellite,B pillar,left. show

@bernardleatmon121 2 года назад

Didn't work... my light is still on

@thomassturm9024 2 года назад

The light will only go off after clearing the error with a diagnostic tool. If it comes back on (after having been cleared) with this fix applied, the fault was/is not the occupancy sensor (alone).

@agedvagabond 6 лет назад

U really should say what model this is for everyone is using different resistors but not saying their damn model so how will anyone know which car needs which resistance

@LockDots84 6 лет назад

It says it in the video...

@nenadned5696 5 лет назад

Ne radi

@13Chrisification 7 лет назад

The reason i had to thumbs down this video is because the cathode is kinda like a one way gate or a fuse that will pop before it allows current to travel backwards thru it. Damaging other components. And when you solder the resistor to both sides of the cathode you bypass it and render it useless. f#*@ing troll I know sorry I just thought it was important

@denisohbrien 7 лет назад

the diode is present in the mat, its purpouse is to allow the seat occupancy sensor controller to confirm that the mat is present and connected, the resistor tells the controller whether the mat is occupied or not. The reason a Diode is used is if you had a dodgy connection or wire chaffing conceivably the car could think the seat is occupied or not without realising a fault condition is present. As it only detects a resistance change. it is highly highly unlikely a fault condition would cause a diode to appear in the circuit so it is used from the get go. no diode = mat is not present or is faulty. the resistance of the mat can still be measured when reverse biasing the diode. so functionality of resistive mat remains, and fault tolerance is increased.