No video :(

How to Calibrate Hobbywing 1080 ESC to a Transmitter

Подписаться 7 тыс.

Просмотров 48 тыс.

50% 1

In this video, I show how to calibrate Hobbywing 1080 ESC to a transmitter in my case Flysky FS-GT3B.
*** PLEASE NOTE: On some transmitters, you will have to REVERSE the order (NEUTRAL - REVERSE - FORWARD) in order to work.
My Top 5 RC Crawlers Entering Into 2022:
#1: Vanqush VS4-10 Phoenix Portal Kit - alnk.to/1C1sgFV (Amain)
#2: Element Ecto - alnk.to/31lw6MK (Amain) | ebay.us/XOvC1N (eBay)
#3: Axial Capra 4WS - alnk.to/9xe10Hw (Amain)
#4: Element Knightrunner - alnk.to/dpmdZjG (Amain)
#5: Traxxas TRX4 2021 Bronco (Orange) - alnk.to/caXnISs (Amain)
#5: Traxxas TRX4 2021 Bronco (Red) - alnk.to/h6ABbLO (Amain)
Camera Gear:
Osmo Pocket - ebay.us/hOMvsj (eBay)
Zhiyun Smooth 4 3-Axis Gimbal - ebay.us/RykvZI (eBay)
Corner Weight Scale:
SkyRC Corner Weight System - alnk.to/9I8jnVq (Amain) | ebay.to/3lT8Xu... (eBay)
My Upgrades Planned:
SSD Brass Knuckles - alnk.to/7M3YAQC (Amain) | ebay.us/vC2wEZ (eBay)
SSD Brass Diff Cover - alnk.to/8iOfxji (Amain) | ebay.us/r66LL0 (eBay)
Hobbywing 1080 ESC - alnk.to/dW6uVqz (Amain) | ebay.us/HZnqOt (eBay)
Holmes Hobbies Crawlmaster 550 Sport 10T - alnk.to/6xEFJaX (Amain) | ebay.us/1ZIAV6 (eBay)
Pro-line Trenchers 1.9" Predator - alnk.to/7WYJzIm (Amain) | ebay.us/hwFCkf (eBay)
Pro-line 1.9 Dual Stage Foams - alnk.to/eDLwQJ4 (Amain) | ebay.us/VE3elj (eBay)
Injora 1.9 Beadlock Wheels - ebay.us/MoiB6e (eBay)
FlySky GT5 Transmitter & Receiver - ebay.us/jMuqzH (eBay)
Tools:
AKA Products Nut Driver AKA44004 - alnk.to/fHg4JGr (Amain) | ebay.us/p00dur (eBay)
MIP Metric Hex Wrench Set MIP9502 - alnk.to/apNljcn (Amain) | ebay.us/N1sR2p (eBay)
MIP Metric Speed Tip Set MIP9512 - alnk.to/hDkpwFA (Amain) | ebay.us/NhytKj (eBay)
Bob Smith Industries Blue Thread Locker - alnk.to/6IzqI6r (Amain) | ebay.us/FPv0U2 (eBay)
Bob Smith Industries BSI-130 Tire Glue - alnk.to/cHHc3QX (Amain) | ebay.us/BkcXbO (eBay)
Fireproof Lipo Safe Bag - alnk.to/4fKOYIp (Amain) | ebay.us/V6P4L5 (eBay)
DerBlue 2pcs Fireproof Lipo Battery Safe Bag - ebay.us/JTBTJs (eBay)
Duratrax Shock Stand - alnk.to/2uBfazv (Amain) | ebay.us/ZKZNz7 (eBay)
Excel Curved Lexan Scissors, 5-1/2in - alnk.to/7qesDqu (Amain) | ebay.us/gFose8 (eBay)
Flush Cutter - alnk.to/eZB2Owb (Amain) | ebay.us/NN8aLk (eBay)
Loctite Blue Threadlocker Stick - alnk.to/bin8doG (Amain) | ebay.us/shbdWD (eBay)
MG Silicone Conformal Coating - alnk.to/7B9dCh9 (Amain) | ebay.us/2neTFV (eBay)
Needle Nose Pliers with Side Cutter, 5in - alnk.to/aWxCfMR (Amain) | ebay.us/tbjo7N (eBay)
ProTek RC Shock Pliers - alnk.to/7fjHEFj (Amain) | ebay.us/ZVnfRK (eBay)
Team Associated 5422 30W Shock Oil - alnk.to/2jGubPM (Amain) | ebay.us/MlmrRZ (eBay)
Team Losi Racing Turnbuckle Wrench - alnk.to/58kBSTG (Amain) | ebay.us/NGv3qh (eBay)
Rubber R/C Work mat - alnk.to/6mJUKCL (Amain) | amzn.to/38m7xA... (eBay)
Versachem Brake Caliper Grease - alnk.to/cSBX2P7 (Amain) | ebay.us/wyleYA (eBay)
🔔Subscribe so as not to miss new videos: www.youtube.co...
===============================
💰Some links are affiliate links, if you make any purchase by following them I will receive a small commission (for future projects)
===============================
#HGP407 #Bruiser #P407 #HG-P407 #HG #Element #Enduro #ElementEnduro #EnduroSendero #ElementEnduroSendero #ElementRC #ElementRCEnduro #ElementRCEnduroSendero #Associated #AssociatedElectrics #AE #SSDRC #journeytheelements #weareae #RTR #RC #RCRadio #RCTransmitter #RCCrawler #RockCrawler #ScaleCrawler #ScaleTrucks #RCTrucks #OsmoPocket

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@larrybahr48 8 месяцев назад

I have 7 crawlers with this 1080 esc. I have NEVER had to calibrate my transmitters. They ALL worked just fine right out of the box.

@BigSungHobbies 8 месяцев назад

That's great to hear. I have quite few myself, and I had to calibrate on one of mine. For the price, best one to get IMHO.

@HobbyQueenRc Год назад

Thanks

@BigSungHobbies Год назад

Thank you so very much for the comment! Greatly appreciate it.

@yt7519 2 года назад

Very good tutorial! Mine would work for setting neutral position but wouldn't do anything after that. I reversed the order neutral, reverse, forward as mentioned in the comments and it worked perfectly.

@BigSungHobbies 2 года назад

Glad it helped!

@daniel_stupid640 5 месяцев назад

Wired one of these to my drift RC and man did u save me 😭🤙

@BigSungHobbies 5 месяцев назад

Glad to be of help!

@faststongesdrc7075 11 месяцев назад

Thank you verry much... it was clear and easy to follow. 🇨🇦

@BigSungHobbies 11 месяцев назад

Great to hear!

@johnathanfarquhar1981 2 года назад

Thank you for your video, but had to set break after setting neutral, instead of throttle.

@BigSungHobbies 2 года назад

Yes, it depends on the transmitter radio. On most, 2nd step will be to pull the trigger, but on few transmitter, you have to reverse the steps by push away for full brake. Glad to hear that you got it setup.

@carlobell2558 3 месяца назад

Thank you.

@BigSungHobbies 3 месяца назад

You're welcome!

@adamb7426 4 года назад

Just what I needed 👍

@BigSungHobbies 4 года назад

Glad to hear!

@tomandrews5392 4 года назад

Hobbywing 1080 is a great ESC and cheap ...When I go brushless I use the Castle Micro Mamba X with Holmes Hobbies 2700 stubby ..but in my comp. rigs With brushed motors Holmes Hobbies BRXL is the best by far 2 to 6s capable....

@BigSungHobbies 4 года назад

I have Micro X with 2000kv Yellowjacket waiting to go into my LCG build :)

@aboomaraqel3049 3 года назад

thanks God bless you friend

@BigSungHobbies 3 года назад

Thank you too!

@RumahkreatifKalibasau 3 года назад

Nice video men

@BigSungHobbies 3 года назад

Thanks for the visit

@but531 3 года назад

Thanks man i just did it.

@BigSungHobbies 3 года назад

Glad I could help

@ArmanRC 3 года назад

youe explanation is very easy to learn, thanks you somuch for the tutorial. 1 sub from me

@BigSungHobbies 3 года назад

Thank you very much for the Sub! Greatly appreciate it.

@YKRCCLUB 2 года назад

좋은 정보 감사합니다

@BigSungHobbies 2 года назад

제 영상을 시청해주셔서 대단히 감사합니다

@nathannorton-clement5229 Год назад

My brand new 1080 g2 esc doesn’t beep when trying to calibrate to my stock trx4 receiver. Can’t find anything online. When I try to calibrate the neutral, throttle and reverse nothing happens 3 seconds after. An anyone help plz

@BigSungHobbies Год назад

I have not used a G2 version, but on G1 version, sometimes you have to calibrate the opposite way in order to work. Try neutral > reverse > throttle and see if that works. If it does not, then I am not sure what is causing it. Might reach out to Hobbywing customer service. Good luck.

@sunglassesron9464 2 года назад

Cool and useful 👍

@BigSungHobbies 2 года назад

Thank you! Cheers!

@dawiweee2631 2 года назад

thanks ;)

@BigSungHobbies 2 года назад

You are welcome!

@allenmills2292 Год назад

I did with your video said and it does not work for me any help would be appreciated

@BigSungHobbies Год назад

For second step instead of pulling the throttle, try pushing it away and for third step try pulling the throttle. Some transmitters have it reverse. Good luck.

@user-qs4bl9wn6o Год назад

how to fix when it blinking red??

@BigSungHobbies Год назад

Try the calibration, and if still having issues, reach out to Hobbywing customer service.

@geraldpenaredondo9783 6 месяцев назад

I have a question , i have a new transmitter , i need to calibrate the new transmitter ?

@BigSungHobbies 6 месяцев назад

I don't have a definite answer. Sometimes it's worked without calibrating, and sometimes it hasn't. I am not sure why that happens. But normally I calibrate it just to be on the safe side.

@geraldpenaredondo9783 6 месяцев назад

@@BigSungHobbies okay thanks . It is normal when im ON the esc takes 1.5sec or 2sec before beeping the esc?

@profjimbo5929 2 года назад

The drag brake on my 1080 was working perfectly the first 3 times I ran the trx4 sport crawler with a GT5 transmitter. I made no changes, but the next time I ran it … no drag brake! I’ve gone over everything a number of times re-calibrating and confirming the settings on the ESC. Still no drag break. Should I just get a new ESC?

@BigSungHobbies 2 года назад

I would check the motor first. ESC is the brain and motor is what actually applies physically the drag brake. If you have access to a different motor, see if the drag brake works on it before looking into a new esc.

@vinceguerra1310 3 года назад

Massive thumbs up! Does it need to be calibrated with transmitter on a rtr model?

@BigSungHobbies 3 года назад

The answer is a little ambiguous. One of my rigs, it didn't need it. On another rig, it did. So not sure, but I would do it nonetheless just to ensure you are starting from scratch. One thing, on some transmitter 2nd and 3rd step is reversed meaning that full forward and full reverse are switched. Normal is Neutral -> Forward (pull the trigger) -> Reverse (push the trigger).

@vinceguerra1310 3 года назад

@@BigSungHobbies brilliant. Thsnks and keep up the great work!

@BigSungHobbies 3 года назад

Thanks!

@vinceguerra1310 3 года назад

@@BigSungHobbies hi. Just fitted 1080 today. Is there a setting for a softer start? Thanks😊

@BigSungHobbies 3 года назад

Awesome. I have a video on my crawler settings. It's been working well for me so far. So check it out.

@rallydogmakes3861 10 месяцев назад

My esc doesnt blink and the motor doesnt make any sound after the third step

@BigSungHobbies 10 месяцев назад

Try to recalibrate it and see if that works. I would reach out to Hobbywing customer service if the issue persists.

@lezgedidonn5049 3 года назад

Hi, I just wanna know if this vid is the fix I need. I was running my RC then it suddenly stopped responding. At first I thought the battery in the car was low. I later noticed that even with a new batt, the car reacts as if the transmitter is turned off, it just keeps going backwards and is no longer responding to any command from the transmitter. Hoping for assistance on this matter, thanks and more power!

@BigSungHobbies 3 года назад

It can be few things, but it sounds like ESC might need to be recalibrated. Try that first, at least that's what I would do. Also make sure that the receiver is working properly. At some point ESC does go bad too, so that might be something you want to check for as well. One thing, when you are calibrating, try NEUTRAL > FORWARD (pull) -- if nothing happens here, then you have to go the reverse route and use > BACKWARD (push). Good luck.

@davidallen313 Год назад

Can it be calibrated with the factory TQ control?

@BigSungHobbies Год назад

Yes, it should.

@jameswhitman7936 2 года назад

Can i bind my stock transmitter and receiver to the 1080?

@BigSungHobbies 2 года назад

Binding is used between transmitter and receiver. ESC just needs to be plugged into ch2 of the receiver to be used. Typically you should calibrate the ESC when it is connected to a new transmitter/radio. And this process will apply to HW1080 as well.

@hadoukennumber13 Год назад

Hello, if the LED on the 1080 flashes as normal but there are no audible beeps, is that the motor at fault? I took my Element for walk today and after about 5 minutes the throttle cut out. Battery fine, wires all connected. Never had this issue before. Steering fine, too. I noticed the LED flashing as normal when use the throttle and on power up but no throttle and no beeps. Thanks!

@BigSungHobbies Год назад

I would start by trying to calibrate it one more time, and see if that fixes it.

@stevenbrooks7776 2 года назад

I took your advice and got a gatekeeper, after minor glitchelike my shop having to change out the radio and reciever, (they put in a spectrum slr300), I bought the 1080esc per yours and other recomedations. It will do nothing after setting the neutral position on the radio. It will go forward and reverse at this point but I have no steering and my reverse is much faster than my forward speed. Is it a bad esc, reciever, radio, or owner error. It now sits motionless on my bench. Help!! By the way love the site. Thank you

@BigSungHobbies 2 года назад

If the shop changed out the radio and receiver, they should be looking into this and setting it up correctly. It sounds like you never completed the throttle calibration. On certain transmitter radio you will need to reverse the order to complete the throttle calibration.. 1st set the neutral, then instead of pulling the trigger (forward) which is the normal process, push the trigger away (braking), then pull the trigger for the final step. That being said, I am not sure why you have no steering. Steering has nothing to do with throttle calibration. Make sure that steering wire is plugged into Ch1 and that it's plugged in correctly. Another reason why the shop should have set this up correctly. As for speed, if your reverse is much faster than the forward speed, then you will need to swap the motor wires...that should help with speed. You can also change it on the remote, but on brushed setup, swapping the motor wire is the quick way to test.

@stevenbrooks7776 2 года назад

@@BigSungHobbies thank you, I now have a gatekeeper drag car. The throttle seems ok now, but it still won't steer, guess I'll try putting in a new servo see if that works. I'll let you know. This thing has been a problem child since I got it. First day out of the box would do nothing. Took it back to the shop and he put a spectrum slr300 reciever in it and it worker, all 4shocks had leaked in the box, I think that associated quality control is severely lacking. Love it when it works, guess I should have left well enough alone, but all i wanted was to make crawl better, hell even got the ecto body ready to go on it.

@BigSungHobbies 2 года назад

If you haven't joined the Ecto/Gatekeeper Element FB page, you should consider doing so. It's a great community. You can post pics and videos, and that should help with troubleshooting. I have purchased four Element trucks so far and I have not run into any quality issues yet. But it sounds like you did. I am really surprised that the shop changed out the radio and receiver instead of isolating the issue, such as try rebinding the receiver, etc... and on top of that you still don't have fully functioning truck. By the way, I am curious why you didn't just choose pick up an Ecto RTR and went with Gatekeeper RTR and pick up an Ecto body. Between the two, I would always recommend Ecto over Gatekeeper as I am not a big fan of heavy cage.

@stevenbrooks7776 2 года назад

@@BigSungHobbies got the gatekeeper for 285$ Unfortunately I dont do social media. But it looks like I'm gonna have my kids set.me up so I can figure out when/where ya'll play cuz its definitely something I want to do in my old age. Most of yours and barc videos just show 1/10s, are 24s welcome also?

@stevenbrooks7776 2 года назад

Also finally got that damn thing to go forward and reverse but still no steering going down to the shop and see what's wrong, he ck it out at N/C. Hes think it's the servo. If so do you have any recommendations, keeping the price affordable. SSDI dosent leave much on the bone

@aronbesenyei4884 3 года назад

Mine does not even beep in neutral. Any ideas?

@BigSungHobbies 3 года назад

Sorry I am not sure. Maybe try reaching out to customer service.

@danfetchen8848 3 года назад

where did you get that camera mount

@BigSungHobbies 3 года назад

I am still looking for the right one, but I am using UBeesize Flexible tripod.

@johnkealohafero8900 3 года назад

what does this do exactly

@BigSungHobbies 3 года назад

If you swap your ESC, it needs to be calibrated to your transmitter/radio, otherwise the ESC does not sometimes recognize the throttle control from transmitter properly. This shows you how to do that for Hobbywing 1080 ESC.

@crawlculturecrewhawaii6626 3 года назад

@@BigSungHobbies i don't remember doing this and mine worked ??

@crawlculturecrewhawaii6626 3 года назад

works?

@crawlculturecrewhawaii6626 3 года назад

yeah man , I connected it and it worked straight away ??? is that weird?? I got the same transmitter and esc

@BigSungHobbies 3 года назад

That's good. the connection between RC and transmitter is actually on the receiver. What ESC does is control the throttle response (namely neutral, forward and reverse). If that is not working properly it will flash on HW1080, that's when you use this. In my case, it worked for a while, but I got a flashing, so I had to recalibrate it, and this will show you how to do it. Hope that clarifies.

@jameswhitman7936 2 года назад

Didn't work

@BigSungHobbies 2 года назад

Sorry to hear that it didn't work, but more details as to where it didn't work and your setup will help isolate the issue.

@scooby4L 3 года назад

It’s not working

@BigSungHobbies 3 года назад

I am not sure what and where it is not working. Did you try, "PLEASE NOTE: On some transmitters, you will have to REVERSE the order (NEUTRAL - REVERSE - FORWARD) in order to work."? A bit more detail might help isolate the issue, and there is always customer service that you can call as well.

@1sick_vic550 3 года назад

I’ve done this like 500 times it won’t do anything I just got this thing in the mail and already regret it so much 🙄

@BigSungHobbies 3 года назад

Check to make sure that ESC is plugged into Ch2 on receiver, and power it up. Also have you tried both ways to connect? Normally it's Neutral, then pull, then push, but depending on the receiver, you need to do it differently. Neutral, then push, then pull. It's very difficult to diagnose without really seeing what is happening.

@1sick_vic550 3 года назад

@@BigSungHobbies it only gets to the point of beeping fast and then as soon as I touch g he set button no matter what it just kicks it right back out of the calibration mode

@BigSungHobbies 3 года назад

Maybe contact warranty/tech support at Hobbywing. It’s a bit beyond my technical knowledge.

@stevenbrooks7776 2 года назад

I agree.

@stevenbrooks7776 2 года назад

@@BigSungHobbies dont waste your time with hobbywing tech support as I'm still sitting here with a inoperable piece of s#it