How to calibrate the Print Flow - Thin wall test - Flow tuning
Guide to connect your printer to your pc to make useful calibrations to improve your prints
For an accurate printer, the first thing you need to do is to calibrate the axes, the flow and extruder, and the hotend pid temperature.
All these adjustments are necessary in order to produce truly correct parts
from both a dimensional and an actual printing point of view.
useful commands
M503 : to display all the present firmware data
M500 : to save all the modifications that are made
G1 E100 F200 : code for extruding 100 mm of filament "with hotend".
M92 E xxx : to store the right value for step mm extruder "xxx" iniserite your value
M303 E0 S210 C10 : autotuner pid starts pid hotend calibration
repetier software www.repetier.com/download-now/
3D Printer Calibration Step mm, Extruder Flow and Pid Hotend
Basic 3D Printer Calibration: Step/mm, Flow and precise prints!
calibration cube www.thingiverse.com/thing:127...
calibration nut www.thingiverse.com/thing:218...
Translated with www.DeepL.com/Translator (free version)
24 янв 2022
