Тёмный

How To Change a Tube and Add Tire Liners to a SUPER73 | It's Easy 

SESSIONS73
Подписаться 5 тыс.
Просмотров 27 тыс.
50% 1

Fixing your first flat on a SUPER73 S2 or RX can be intimidating at first. I hope this video gives you the confidence to do it on your own. While you're at it, line those tires! Check out the links to everything I used down below. Good luck!
Get $75 off a Super73 when you buy through this link: www.talkable.com/x/Jq36tg
Order Rad Power Bikes tubes here: rwrd.io/1vwwzy7?c
Order Tire Liners here: amzn.to/3uFIGDv
Order Park Tool bike kit here: amzn.to/3hjzJfj
Need a quick charger or 2nd battery for your Super73? Check out ChiBatterySystems: chibatterysystems.com/?ref=SE...
Use Code SESSIONS73 at checkout to get $50 off the Ranger, Ranger GT, or Ranger ZX!
Use Code SESSIONS73Z1 to get $25 off the Ranger Z1 CNR!
Things every Electric Bike owner should have:
Handlebar Jack: www.handlebarjack.com/?ref=se...
Mr. Tuffy Liners: amzn.to/3uFIGDv
Leatherman Skeletool: amzn.to/3hOqggq
Park Tool Essential Bike Tool Kit: amzn.to/3hjzJfj
Tip Jar: bit.ly/sessionstipjar
Things I use in my videos:
$10 Off At DJI.com: referral.dji.com/events/dji-r...
Get the best office setup from Autonomous.ai: bit.ly/35vWvqL​
Link to buy the DJI Mavic Air: amzn.to/2Fmc9KY​
Link to buy the DJI Pocket 2: amzn.to/3lU9pb3​
Link to buy the PowerDeWise Lav Mic: amzn.to/2MXkvN2​
Link to buy the Rode Wireless Go: amzn.to/32JNT2j​
Please note: this post contains affiliate links
#SUPER73 #eBike #HowTo

Опубликовано:

 

11 май 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 121   
@SESSIONS73
@SESSIONS73 3 года назад
I wanted to make a quick clarification on adding back the zip ties. You'll notice that where I removed one from and where I re-added it are two different locations. I was mistaken by adding the 2nd one back to the connector when it belonged lower near the horizontal section of the tire frame. This is most likely to keep that wire from moving and hitting the tire. One other thing to keep in mind is to make sure you don't pinch the brake line with the zip tie. It's a smaller black tube next to the motor connection wire. Forgive my error and happy riding!
@marvinlewis1879
@marvinlewis1879 7 месяцев назад
Nice guy, very patient, and good "how to" video.
@YaTuChavez
@YaTuChavez 3 года назад
I came across this video at the perfect time! 2 Days ago I got my first flat on my RX and I've been stressed about getting it fixed but this video seriously helped! Thank you!
@SESSIONS73
@SESSIONS73 3 года назад
Awesome. Glad I could help. I was sweating it too, but it turned out to be no big deal. It can easily be done in less than an hour your first time. Thanks for subbing!
@CharlieRico710
@CharlieRico710 Год назад
@@SESSIONS73 hi guys i need help got small puncture on my super 73 rx has the standard tyres Would a 20 x 4/4.5 inner tube be OK to fix the puncture
@PleasantGreen
@PleasantGreen 3 года назад
Thanks for the video!
@relax2565
@relax2565 2 года назад
LOVE ALL UR VIDS,SO MUCH STEP BY STEP DETAIL ON HOW 2'S AND INFO...GREAT CHANNEL..HAPPY I FOUND YOU..THANK U
@SESSIONS73
@SESSIONS73 2 года назад
You’re welcome!
@johnc1486
@johnc1486 2 года назад
Excellent video! It's great! that you too have the same generation S2 as we have. No derailleur! I hunted and pecked RU-vid for a video that had clarification on rear tire removal for models W/O derailleurs. Having your pooch as part of the video is a great touch.Thanks....
@SESSIONS73
@SESSIONS73 2 года назад
Thanks for the kind words!
@colbyleatham247
@colbyleatham247 2 года назад
Tim, this video helped so much! I didn’t even hesitate and got that back tire off in no time. I have a RX
@SESSIONS73
@SESSIONS73 2 года назад
Thank you sir! Glad you found value in it.
@jpbach777
@jpbach777 2 месяца назад
Thanks for doing this!
@tobyhammett6807
@tobyhammett6807 10 месяцев назад
Thanks for this well done video, helped me out for sure 👍🏻
@SESSIONS73
@SESSIONS73 10 месяцев назад
Glad it helped
@austinwarnick
@austinwarnick 3 года назад
Thanks! Was looking for this everywhere!
@SESSIONS73
@SESSIONS73 3 года назад
Glad I could help!
@thepeterparkershow
@thepeterparkershow 3 года назад
Love your video man. Found you on Reddit. Keep up the good stuff! 🤟
@SESSIONS73
@SESSIONS73 3 года назад
One of the legends in the space. Thanks for checking in.
@eanstonerhall5688
@eanstonerhall5688 3 года назад
Great advice, the videos are epic carry on the good work fella. Peace from the UK
@SESSIONS73
@SESSIONS73 3 года назад
I appreciate the love from across the pond!
@jznnk
@jznnk Год назад
Thank you sir!!!! Installed liners on Front/Rear + changed flat rear tube!!!! Best video. You should be featured by @Super73 … 😎😎😎
@SESSIONS73
@SESSIONS73 Год назад
Glad it helped! I totally should.
@charlesbraddy2455
@charlesbraddy2455 2 года назад
Thanks for sharing! I just bought a ZX! I can't wait to ride!
@SESSIONS73
@SESSIONS73 2 года назад
Stoked for you!
@66ElCamino357
@66ElCamino357 6 месяцев назад
Great tutorial, thanks for posting....
@SESSIONS73
@SESSIONS73 6 месяцев назад
You're welcome!
@stephentrepreneur
@stephentrepreneur 2 года назад
Punctured my rear wheel 6 months ago (thankfully had GoPro on myhead, so whole incident on my channel!). Discovered at time no tyres nor tubes available around the world. Finally found and purchased 20x4" green tyre and settled for 4" tubes. But yet to put back on. Rear wheel appeared very complicated. Thanks to your video, not so hard after all. Thanks!
@SESSIONS73
@SESSIONS73 2 года назад
Glad it worked out for you! Thanks for stopping by.
@chudman71
@chudman71 3 года назад
Informative video, just waiting for my tire liners to arrive..👍🏻
@SESSIONS73
@SESSIONS73 3 года назад
Thanks! Good luck installing them
@laurancelevine7391
@laurancelevine7391 10 месяцев назад
Thanks for the step by step. I followed it but ran into problems with the chain going back the way it was before. Any pointers you can give on getting h the chain stay on?
@jamiefeasel3782
@jamiefeasel3782 2 года назад
You seem like you know what your doing thanks for the video it was helpful I have a juiced scrambler have not needed to do that yet
@SESSIONS73
@SESSIONS73 2 года назад
Glad I could help
@David_Creyke
@David_Creyke 3 года назад
Very helpful bro, got a flat was able to take it apart and patch it until I get my order for a lining 👍 really easy to learn the way you show it, I struggle with mechanical stuff
@SESSIONS73
@SESSIONS73 3 года назад
Glad I can be of assistance. Glad you’re back on your way!
@David_Creyke
@David_Creyke 3 года назад
@@SESSIONS73 I dare say my repair was quite good 😂
@fstgone1
@fstgone1 2 года назад
Got a flat today gonna so this tomorow! Thanks dude.
@SESSIONS73
@SESSIONS73 2 года назад
I am glad I could help!
@martlgr
@martlgr 2 года назад
Trying this tomorrow. Wish me luck!!
@SESSIONS73
@SESSIONS73 2 года назад
It's tomorrow. Hopefully luck is with you.
@GabbyOSullivan-oj5sn
@GabbyOSullivan-oj5sn 5 месяцев назад
Great video. I’m having trouble reinstalling the rear tyre. It’s like the frame width is too small and I can’t fit both sides into the grooves
@ivannanola3053
@ivannanola3053 Год назад
Great video. Thank you for sharing. My flat repair was ten times more difficult because my hex bolts were on super tight. Two came off with a good tug. Two bolts ended up getting stripped. Trying to find replacement bolts took some trial and error. The bolts you need are M8 20mm long 1.25mm thread pitch. If you strip your bolts like I did, look for the XEWEA 13Pcs Screw Extractor Set Hex. The blue stuff on the tips of your bolts is lock tight. I think you should add some of that when you put your bolts back on. Your video looks like your bolts come right off. Just make sure they don't vibrate off.
@SESSIONS73
@SESSIONS73 Год назад
For sure. Time to give my bike a walk around
@davidsan3813
@davidsan3813 3 года назад
Thanks for teach us
@SESSIONS73
@SESSIONS73 3 года назад
It's my pleasure
@simes333
@simes333 3 года назад
Great help for my future yet to be puncture lol, Hudson blue Uk owner ✌🏻
@SESSIONS73
@SESSIONS73 3 года назад
Hudson gang!
@dylandamn1
@dylandamn1 6 месяцев назад
Time codes would be awesome!
@bismarckrobles1987
@bismarckrobles1987 2 года назад
I got a flat too yesterday on my z1 waiting on my inner tubes. I’m probably gonna use the fix a flat stuff till they come in haha
@SESSIONS73
@SESSIONS73 2 года назад
Bummer!
@DinosaursPWNify
@DinosaursPWNify 2 года назад
How did you slide the tire back into the frame? I'm having the hardest time getting that step complete. Thanks
@SESSIONS73
@SESSIONS73 2 года назад
I pulled on the frame slightly and it pops into place…
@karlc9773
@karlc9773 2 года назад
Great video is that an ammo tin on your frame, if so will one fit a eu zx model, not got my bike yet but watching your videos for ideas thanks again karl
@SESSIONS73
@SESSIONS73 2 года назад
Yeah, it totally should be able to fit.
@karlc9773
@karlc9773 2 года назад
@@SESSIONS73 great how did you attach yours to the frame
@oidbio2565
@oidbio2565 2 года назад
I ordered an RX and was about to cancel the order after I saw another guy’s vid in how to fix a flat! Then yours was next in line in youtube so I watched yours and it totally seems doable now. So thanks! I had another electric bike with the motor in the hub of the back tire and it was really really hard to fix flats with a cobweb of wires that had to be carefully removed in addition to a bunch of other things! One question: Did you use that sealant spray to get home after getting a flat? I think it’s called Quick Fix or something like that. Just wondering what blue stuff is coming from the puncture. Thanks!
@SESSIONS73
@SESSIONS73 2 года назад
The gash was too big for that slime to do anything. I had to call a friend to come pick me up.
@Drobilkin
@Drobilkin Год назад
Nice dog 😀
@SESSIONS73
@SESSIONS73 Год назад
Very nice.
@xDBZ
@xDBZ Год назад
im trying to replace my rx mojave wheels from grizzly to lzrd tires, but their website only has 20 x 4.5, not 20 x 5. do you know if that will fit fine for the back tire?
@SESSIONS73
@SESSIONS73 Год назад
Yep, you can do 4.5’s on the rear.
@turbo7367
@turbo7367 3 года назад
I did this awhile ago your actually have more protection if you don't cut it i've been going 4 mos without a flat even rode over glass to test them haven't gotten a flat since i slimed and used a liner
@turbo7367
@turbo7367 3 года назад
of course i added some shinkos to mine like a week ago they are bicycle flat proof if you wanna do that add get 16x3.0 im gonna be uploading a vid real soon of my setup my s1 goes 50mph
@turbo7367
@turbo7367 3 года назад
www.chapmoto.com/shinko-sr241-series-dual-sport-front-rear-tire.html?sku=369-874441&gclid=CjwKCAjwv_iEBhASEiwARoemvMlb5Ypgkq1TIs0I2h-Xeq_aY5gq4mCLVT9pbqs8YZzPne12hMCFORoCnE8QAvD_BwE
@SESSIONS73
@SESSIONS73 3 года назад
That’s next level! Thanks for sharing. Can’t wait to see your video.
@jackiehummel4328
@jackiehummel4328 2 года назад
Have you gotten the 10 speed kit? Any possibility of a tire changing tutorial with the 10 speed kit on a bike?
@SESSIONS73
@SESSIONS73 2 года назад
I don't have the 10 Speed kit on there... yet.
@Burronster
@Burronster 2 года назад
Does this tutorial go for the rx too changing tires?
@SESSIONS73
@SESSIONS73 2 года назад
Yep, pretty much the same, except you have a chain tensioner.
@thechabad
@thechabad 2 года назад
Similar story for me the other day, less than 24 hours after adding tire sealant i picked up a thumb sized stick in the tire. One tip my co worker gave me was to use the old tube as a tire liner by slicing it around the inside and sticking it in your tire. Hope this helps someone out
@SESSIONS73
@SESSIONS73 2 года назад
Smart. Extra reinforcement is always necessary.
@benswonger5813
@benswonger5813 2 года назад
Does that tire liner have a sticky said to keep it in place?
@SESSIONS73
@SESSIONS73 2 года назад
It doesn't... You slightly inflate the tube to keep it in place
@natepeddles
@natepeddles 2 года назад
Random question but when you upload your videos to RU-vid what category are you placing them in.
@SESSIONS73
@SESSIONS73 2 года назад
It just depends on the video. Either People & Blogs, Science and Technology, or Education. I don’t give it too much thought.
@natepeddles
@natepeddles 2 года назад
@@SESSIONS73 Awesome appreciate the help just wanted to get a rough idea of where to go I'm here in Minnesota just starting to make riding videos but completely new to all of this so yeah any help is a big help thanks.
@dopeyheathen8342
@dopeyheathen8342 3 года назад
will this work on a S1? just went to a shop and they said $60 to install the tuffy liners i purchased.
@SESSIONS73
@SESSIONS73 3 года назад
They should. Make sure they fit width wise, but yes, they’ll work.
@nternetrat
@nternetrat Год назад
if you see this!! can i do this without removing the tire from the bike and inflating the inner tube once inside ??
@SESSIONS73
@SESSIONS73 Год назад
You could, but it seems more difficult. Try it, if it saves you time, come back and let me know.
@MrLeprechaun666
@MrLeprechaun666 3 месяца назад
Damm lord Thank s Mr
@SESSIONS73
@SESSIONS73 3 месяца назад
You're welcome.
@RenageTV
@RenageTV Год назад
Can you double up on the liner?
@SESSIONS73
@SESSIONS73 Год назад
Yep, you can. 👍
@AtticAZ
@AtticAZ 4 месяца назад
I did a tire liner in my wife’s bike and it rear tire feels bumpy. What did I do wrong? It’s the super sucker rear tire.
@SESSIONS73
@SESSIONS73 4 месяца назад
It's most likely your bead isn't set. Check the rim of the tire and make sure the tire is on there evenly. If not, deflate, then re-inflate until you hear a pop. Careful not to over-inflate though. You can go a little past the 35 PSI recommendation.
@ianmangham4570
@ianmangham4570 10 месяцев назад
Buy velcro to secure cables
@leogarcia7111
@leogarcia7111 2 года назад
I love the detail you went in to! The super73 "official" tire replacement video shows none of the important steps in getting the wheel off 🤦‍♂️
@SESSIONS73
@SESSIONS73 2 года назад
That’s what I’m here for! Thanks for checking in.
@leogarcia7111
@leogarcia7111 2 года назад
@@SESSIONS73 just got my R yesterday and I'm in love it's awesome! Thanks for all the good advice. Hope I won't need to replace a tire soon 😅
@joep4235
@joep4235 2 года назад
I noticed that you did not put in slime during the repair. Were you unhappy with it? Do you think if you had brought a pump on your ride, you could have made it to the airport (with the slime plugging the hole)? Trying to decide whether slime is worth the effort... thanks so much
@danimayb
@danimayb 2 года назад
It looks like the slime he had in there was no good against that big tare, So he decided to use tire liners instead with the new tube. This is a far better choice, Or something like Tannus armor is very good.. That's what I would advise! Slime is ok but it's only effective with small enough breaches and not not really something you can fully rely on especially on fat tire hub driven ebikes.
@SESSIONS73
@SESSIONS73 2 года назад
Agreed. I may throw some slime in there again, but I've been good with out it so far.
@SESSIONS73
@SESSIONS73 2 года назад
It's nice to have an extra barrier and it's easy to add. I'd say go for it, but I've been just fine without it.
@creativedaniel7980
@creativedaniel7980 2 года назад
🙏🏿
@SESSIONS73
@SESSIONS73 2 года назад
👍
@Cobblers1982
@Cobblers1982 3 года назад
Own a zg, after about 3 months the chain come odd riding on a flat smooth road one day. Since then I can't realign the chain how it previously was, just constantly runs along the metal frame of the bike. Making horrible grinding noise. Before it may occasionally ching off the chain guard but this is completely different and off-putting. Finding videos for zg or z1 are quite hard. I feel like I bought the forgotten super73 bike. Especially now the zx out.
@SESSIONS73
@SESSIONS73 3 года назад
That sounds like a really bummer. Has Super73 support given you any help? Also, upload a video of the problem to Supper73 Facebook’s groups or sub Reddit. There’s a wealth of knowledge in the community.
@melchiorrecompostella349
@melchiorrecompostella349 3 года назад
If anyone knows where I can get off-road tires for my RX in Europe please let me know! thanks XD
@SESSIONS73
@SESSIONS73 3 года назад
Wish I could help. Greetings from across the pond.
@melchiorrecompostella349
@melchiorrecompostella349 3 года назад
@@SESSIONS73 Hahah, thanks! I found some! over at urbandrivestyle.com
@donshreeves8887
@donshreeves8887 Год назад
Super 73 is always out of parts that you need what the hell is up with that aftermarket is your best bet
@SESSIONS73
@SESSIONS73 Год назад
Yeah… I hear ya. You can usually find em cheaper too.
@jonathanpineda5477
@jonathanpineda5477 Год назад
I was following your steps and I actually lost a little peace.. the anti-rotation washers from one side 😞
@SESSIONS73
@SESSIONS73 Год назад
Oh no! I am sure you can pick one up online. I don't have a source, however.
@jonathanpineda5477
@jonathanpineda5477 Год назад
@@SESSIONS73 I got a question. I out the tire back but the change is not too loose or too tight. More in the tight side. Is that fine ?
@popsiclestick8405
@popsiclestick8405 3 года назад
Tire liner is good but adds weight to the tires and makes the bike slower
@SESSIONS73
@SESSIONS73 3 года назад
Not as slow as a flat, but yeah, my bike is getting heavy
@popsiclestick8405
@popsiclestick8405 3 года назад
@@SESSIONS73 no ur getting heavy as well plus watch wat u run over ur not suppose to run over glass and nails pluse putting 36psi is going to explode ur tire
@SESSIONS73
@SESSIONS73 3 года назад
Thanks. You’re kind. 36 psi was to set the bead like the manual suggests. I let some air out shortly after to recommended PSI.
@SESSIONS73
@SESSIONS73 3 года назад
My channel’s first troll. That means I’ve finally made it. I should send you a prize or something.
@dopeyheathen8342
@dopeyheathen8342 3 года назад
@@SESSIONS73 lol you have arrived sir
@clandry138
@clandry138 Год назад
Don’t get how to remove chain. Should have shown that part.
@MrT-tn4qe
@MrT-tn4qe 5 месяцев назад
Aren't Mr Tuffy liners dangerous to use in fat tires? According to their own website you SHOULD NOT USE MR TUFFY LINERS IN FAT TIRES, they will damage your tubes... please read what they say in the FAQS, I have no idea why they even sell these for Fat Tires if they are not to be used: Mr. Tuffy FAQ - Do you make Mr. Tuffy for mopeds, motorcycles or cars? "We’ve tried .. and failed. Mr. Tuffy liner needs a certain amount of air pressure against it to keep it in place. In a test in a 25 psi moped tire, the moped size liner worked it’s way around to the rim side and actually cut off the valve stem ... not exactly the result we were hoping for."
@SESSIONS73
@SESSIONS73 5 месяцев назад
I wonder if that is for tubeless tires? The moped scenario doesn't sound like it... But I can see cars and motorcycles being tubeless as the issue.
Далее
How to Change a Flat Tire on a Super73
15:41
[RU] Winline EPIC Standoff 2 Major | Playoffs
4:38:55
Просмотров 168 тыс.
HOW TO NOT GET YOUR SUPER73 STOLEN!
10:50
Просмотров 50 тыс.
Does Slime Work? Let's Find Out.
18:56
Просмотров 67 тыс.
Tune your Super73 shocks with the Rolling Fix!
15:03
Просмотров 17 тыс.
How to Change Gears on a SUPER73
2:45
Просмотров 9 тыс.
SUPER73 Tutorials: R-Series Wheel Maintenance
8:45
Просмотров 28 тыс.