Just changed today for the first time by my own and you don't actually need to take out the airflow sensor. There's enough room to easily push the filter back and take it out.
Thank you! Nice guide! Did you already change the fuel filter on the W205 gaser model? On my C180 the engine bay cover is hold in by "balls in cups" you just rip it UP with force away from the engine to the bonnet straight up with some prying, no screws
You don't need to touch air flow sensor, you don't use engine oil as lube on rubber parts it will damage the part and where and how did you learn to shut the screws LOL , thought this was a joke but you muppets acted like you know what you doing, you don't have a clue and someone's going to follow this and damage their engine.
A very misleading and incompetent. You MUST NOT disassemble the intake tube. You lift the cover, you air dust and vacuum clean the filter's housing (esp. underneath the filter), then you slide the filter backwards, lift its front end and get it out, then vacuum clean the housing again and put a new filter in a reverse order: put it inside in an inclined orientation matching housing's guides and filter's recesses on its rear end, lower the front end, and slide it towards the air intake tube. Secure the cover and you are done. If you do it like on this video, eventually you will end up with some debris accidentally getting into the air intake (RIP for the turbocharger).