Which is your favourite watch faces? Feel free to leave your comment or question below. This tutorial is tested under below devices/software versions: - iPhone 12 Pro Max: iOS 14.3 - Apple Watch Series 4: WatchOS 7.2 - Clockology version 1.3.1 Minimum operating systems are iOS 13, iPadOS 13, and WatchOS 6 for the iPhone, iPod Touch, iPad, and Apple Watch respectively.
I have few douts …. 1. When i search all youtube video about clockology no one showing how notification and control centers working ? 2.if incase i dnt want clockology i can simply delete the application or not ? 3. Normally when notification pop up to the watch face ( depend) , so while using clockology its same ?
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
Great job everything is perfect If anybody has a problem just go through the steps and do it over I did it three times and finally got it to work my advice is to go to through the steps thoroughly
Hi, I would suggest to turn off the always on function as Clockology, like all third party apps, does not support always on. Currently, only Apple’s own faces and the workout app support always on.
Wow!!!! I actually did it! I installed that very nice looking Rolex Cosmograph face just like the one you have in this video and it looks great! Thank you so much for your help. I agree, turn off the “always on” display feature of you are going to install these custom faces on a series 5 or 6 watch. It looks better.
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
Am having some issue while syncing the clockology to my apple watch series 6 . i already reinstalled the application and restarted both the devices apple watch and my phone but same problem. unable to syn and still getting the remote control on my apple watch
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
this awesome. my series 2 is running 6.2 but anytime I go back to menu it disappears and I have to tap on the app again. and in my phone it always. can you help.
I can download watch face from Clockology fans group, but it will disappear after I close the Clockology app. May I know how to save the watch face into Clockology app?
Thank you so much for your awesome tutorial bro! Can you share the Panerai face you show in the beginning? Ive searched all Panerai ones in the FB group, but its not there :)
I found this from "Clockology Fans" Facebook group www.mediafire.com/file/owznbyct903ajr1/Panerai_Luminor_Marina_Logo_by_GHST.clock/file?fbclid=IwAR2d6D0bQv2547kYAGvpwVKLiV6nG2zAP6IqbzIWPktctiVDMCmOZHSt5rA
I found the link from "Clockology Fans" Facebook group www.mediafire.com/file/0pr12z64j3z3q86/selectedClocks.clk/file?fbclid=IwAR0D6AzqHK9hinFLkWcmTIc2hKwNAeJw9UdgUsjpz1i52WfRnCN1Z2uumbg
Am I the only one uncomfortable with the installation of a random script that it's called 'remove-something' from my iphone and is not properly explained what it does!?!!?!
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
I have synced the beta file but I still the remote icon on the faces!? I also closed and reloaded the Clockology app but the remote icon is still there. Any idea?
Hi, the remote icon should be gone after syncing the beta file and so I guess sync was not successful. Make sure Clockology is opened on your watch when syncing the file.
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
Dear. I will enable stay live in apple watch and other steps also following. But still few seconds then return the previous face. Pls help me. My watch series 5
I cant lock the watchface from clockology , i did stay alive and wake up screen after an hour , didnt work yet . it get back to the original apple watchface
hi there, thanks for the video i followed the exact steps. But why watch reverts back to the default dial. The only time mine works is when I open the clockology app on my iwatch series 7. Is this the way it is meant to run? I have included a video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nyhcgHXMk_A.html. Any help would be greatly appreciated.
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
Is your iPhone & Apple Watch running on iOS 14.3 and WatchOS 7.2 respectively? Anyway, it should be good as long as you have enabled the "stay alive" function
@@360TechBrews Yes, both my iPhone and Watch is all up to date, I was able to play around last night and tested, got it to work, pretty cool, since is a 3rd Party App and Apple restricted, so only can last set 1 hour on the Face Watch, it is what it is....
@@brokemansoff-roading5087 Minimum operating systems are iOS 13, iPadOS 13, and WatchOS 6 for the iPhone, iPod Touch, iPad, and Apple Watch respectively.
Hi my friend thanks for the video. Everything works great. But when my watch rest the apple clock shows up momentarily before wale up. How do I get it to be black like yours?
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
One question. When you went in to the app on your phone you clicked on General and then Wake Screen . You choose Return to clock 1 hour . You did not have the option of After Crown Press . I have that option so which one should I click on .
I have sync with the enablebeta, restarted my watch million times. After whenever I tried to sync any downloaded clock face just looping in “syncing” and never goes success. Please help 😫😫😫
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
@@360TechBrews thank you so much! It finally works by your help!! It’s all about the Bluetooth, I just off the Bluetooth and it can sync. Thanks again!
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
Hi, please try below methods I found from Clockology Fans FB group. Is your watch running on WatchOS 6 or above? 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
@@360TechBrews i have done what the instruction siad but stil it wont even open the watch app the open watch app logo is grey and when i press on it it dose nothing i tried turning on and off my pohne and watch
@@rammaravajhala3200 Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
@@jadensoleimani8418 Depending on you IOS and Watch OS version you have to change the screen wake settings to the following: WatchOS7.2 -> After one hour. You also can Enable Stay Alive mode (Travolta) by hard pressing on the watch screen and selecting The dancing Button! WatchOS7.0 or 7.1 -> After Crown Press WatchOS6 -> Always
Hi, please try below methods I found from Clockology Fans FB group. Don't forget that at the moment of syncing, Clockology should be opened on your watch too. 1. Simply restart (turn OFF and then turn ON again) your iPhone and Apple Watch 2. Turn OFF Bluetooth and Sync, then turn ON Bluetooth again and Sync. 3. If this happened after the last update, then close the app on iPhone, remove it from running in the background (do not uninstall it), close the app on your watch by pressing the crown, put your wrist down so the watch screen will go off. Wait 10 sec, open the app on your watch, then on your iPhone. Try to Sync. 4. Reinstall clockology app.
