How to Change CZ P10 C BackStrap

Подписаться 29 тыс.

Просмотров 10 тыс.

50% 1

Harry from UBR Tech shows you how easy it is to change the CZ P10 C backstrap.
This video is to show you how to assemble and disassemble for purposes of repair or maintenance only.
Tool set I used in this video:
amzn.to/45zjP6E
Follow me on Instagram @UBRTechInc
Subscribe for more UBR Tech content @UBR Tech
If you would like to support the channel, you can make a donation at paypal.me/UBRTech. All donated money goes directly to improving the channel and content.
Thanks for watching and don't forget to subscribe.
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.

Опубликовано:

13 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@normanlira1771 Год назад

Bro. I just picked up a Cz p10s. Great gun. But I effing swear it should NOT be this hard to change a back strap 😑😑🙄🙄🙄

@UBRArsenal Год назад

Agreed, the back strap pin shouldn't have that rough part on it. That would make it much easier.

@jboneshakur7143 Год назад

I cosign..love mine as well hate the damn pin for bacstraps

@riverwalker2173 10 месяцев назад

It's even harder to change backstraps in the CZP-09. Try putting a tiny pin through the pressure of a spring plus a little plastic holed out post. I tried every trick I knew of but couldn't get the little sucker through, so I took it to my local gun shop, and the attendant struggled with it too. Finally, he got the pin in using the side of his counter to push the post & spring flush. My Glock backstrap took 5 minutes to change. My CZ took half a day. Terrible backstrap design. CZ needs to improve this if they want to keep my business!

@jimib12 8 месяцев назад

Which size comes already preinstalled? Small?

@oklahomasooner7686 8 месяцев назад

@@jimib12yes. Small

@robertledford3004 Месяц назад

Great video

@UBRArsenal Месяц назад

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@KENAHIGHLANDER Месяц назад

Great training video

@UBRArsenal Месяц назад

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@km.productions 9 месяцев назад

Thank you my friend!!! This is great explanation!!!! I totally enjoyed the video!!! Cheers!!!!

@UBRArsenal 9 месяцев назад

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@johnfusaro8978 11 месяцев назад

Thank you great video just what I was looking for!

@UBRArsenal 11 месяцев назад

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

@jan6981 Год назад

CZ should design it using torque screw. It would be easy.

@UBRArsenal Год назад

Yeah, almost anything would be better. 👍🏼🤜🤛

@qbanz00 7 месяцев назад

Thank you , but damn this should not have taken 8 minutes ! I’m glad I watched because I took a small Allen key and put my p10c in my garage vise & started hitting it with a mallet, thinking it’s as simple as changing my Glock or Canik back strap

@UBRArsenal 7 месяцев назад

I'm happy that this video was helpful. If it only targeted experienced gun handlers, it would have taken less time to produce. However, I aim to make my videos accessible to all.

@qbanz00 7 месяцев назад

@@UBRArsenal reading this as I’ve finally got the pin out ! 😂 didn’t have a push tool so I used a 1/16 drill bit and hammered that down (which broke my bit) but nonetheless I got it out. But, I completely understand , I didn’t mean it in a way to discredit your video…I’m gonna go ahead and click that subscribe button ! Thanks for your help.

@UBRArsenal 7 месяцев назад

I am happy to hear that you were able to finish the job. To be honest, I didn't think that you had any malicious intent with your comment. I simply try to explain the reasons behind the way I create my videos. Thank you so much for subscribing to my channel. It truly helps me out. Have a fantastic day! 🤜🤛

@nickb8755 2 месяца назад

@@qbanz00yeah the hard part is finding the punch tool I’ve found 😂

@oklahomasooner7686 8 месяцев назад

Great video. Thanks for posting. Was you’re p10 made in USA or Czech Republic?

@UBRArsenal 8 месяцев назад

I’m glad you liked the video. This one was made in Czech.

@fredflintstone1863 5 месяцев назад

Thx

@UBRArsenal 5 месяцев назад

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

@omarpineda57 7 месяцев назад

The soft cloth and using a mag really came in clutch. Absolutely despise this design choice.

@UBRArsenal 7 месяцев назад

I am glad to hear that you enjoyed the video and that the soft cloth and mag tip were helpful. Thank you for watching and leaving your feedback. Have a great day!