Тёмный

How to change front springs on FORD FIESTA V JH, JD [TUTORIAL AUTODOC] 

autodoc.co.uk
Подписаться 399 тыс.
Просмотров 19 тыс.
50% 1

How to change front springs / coil springs / suspension springs on FORD FIESTA (JH1, JD1, JH3, JD3) (JH1, JD1, JH3, JD3) 1.4 Hatchback 2001-2010 [TUTORIAL AUTODOC]
Springs on FORD FIESTA Mk5 Van (10.2003-12.2010) / FORD Fusion Estate (JU2) (08.2002-12.2012) / MAZDA 2 Hatchback (DY) (02.2003-06.2007) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
⚡ All video and pdf tutorials on FORD FIESTA (JH1, JD1, JH3, JD3) parts replacement: download and watch at AUTODOC CLUB - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...
🔝 Top brands that produce springs: KYB, LESJÖFORS, STARK, MONROE, RIDEX.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC - interstitials....
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
Springs: www.autodoc.co...
Springs for FORD FIESTA (JH1, JD1, JH3, JD3): www.autodoc.co...
LIQUI MOLY Chain Spray: www.autodoc.co...
WD-40 Grease Spray: www.autodoc.co...
LIQUI MOLY Fast Cleaner: www.autodoc.co...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
🛠️ The tools you need to replace front springs:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- combination spanner No.13
- drive socket No.13
- drive socket No.15
- drive socket No.17
- drive socket No.19
- drive socket No.32
- HEX bit No.H6
- Torx bit T50
- wheel impact socket №19
- ratchet wrench
- torque wrench
- shock absorber socket
- hammer
- tap wrench
- pin punch
- rubber mallet
- crow bar
- hydraulic strut spring compressor
- hydraulic transmission jack
- fender cover
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► FORD car repair tutorial - • FORD car repair tutori...
► FORD FIESTA 5 car repair tutorial - • FORD FIESTA 5 car repa...
► How to replace rear springs / rear coil springs on FORD FIESTA 5 (MK6) - • How to change rear spr...
► How to replace rear shock absorber on FORD FIESTA 5 (MK6) - • How to change rear sho...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
Snapchat: / autodoc.uk
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2019 AUTODOC GmbH All rights reserved

Опубликовано:

 

9 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 7   
@Toms_Short_Movies
@Toms_Short_Movies Год назад
This video wasn't recorded on a 20 year old car! This is a lot harder than some small cars. Drop links bolts can just turn in the ball socket when old. Then CV joints can also need bashing free from the hub and the threads need protecting. Don't walk into this job blindly.
@autodocuk
@autodocuk Год назад
We cannot show all the nuances and problems when replacing, this is all individual and it is not always possible to solve them at home. To avoid this, we always recommend that replacements be made at specialized services.
@hairy_pete4933
@hairy_pete4933 Год назад
iv noticed on theses videos at everything they do is so easy , today 01/04/2023 i done my drop links , lower ball joints , track rod ends and belive you me car is 20 years old its a 2003 1.4 tdci and the nuts etc were a nightmere i started at 10 this morning and dindt finish till 6 at night and that was both sides glad its done
@iankelly6663
@iankelly6663 3 года назад
Easy when you now how good job 👍
@nickybyrne4961
@nickybyrne4961 2 месяца назад
No need to remove hub nut, drive shaft, ball joint
@PeterPan-ml2sx
@PeterPan-ml2sx 2 года назад
Why are the torque settings on the video different to the pdf download instructions?
@autodocuk
@autodocuk Год назад
Thanks for your feedback! Please check the time of the fragment in the video and dfp.
Далее
Cleaning this disgusting Ford Fiesta Zetec
33:24
Просмотров 355 тыс.
Ford Fiesta Front Brake Discs & Pads Replacement
29:36
5 Mini Mods for my MK6 Fiesta ST150
13:47
Просмотров 35 тыс.