How to Change or Replace Regulator Manifold on Air Compressor

Подписаться 4,4 тыс.

Просмотров 122 тыс.

50% 1

In this episode of GT Air Projects we show you how to swap the regulator manifold on a Burisch BT3100V / BT350V air compressor using Burisch X4550 sealant adhesive compound and a few basic hand tools. The compound as well as the pressure switch are available on our website at www.gtair.co.uk

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@sygad1 2 года назад

Wish I had seen this video before I butchered the whole process, thanks for the info, i'll use it wisely on my next unit

@CarbonWorkshops 4 года назад

Would never of managed this without your vid!

@aalbbaa22 2 года назад

*This does exactly what I was wanting **MyBest.Tools** Price was fantastic, lower than Harbor Freight-and it included hose and attachments, and IT IS MADE IN AMERICA, unlike Harbor Freight*

@jamessimmons1888 2 года назад

On my compressor it had a air manifold with a built-in regulator. It was always leaking causing the compressor to constantly come on. It also had to be adjusted wide open to get any decent pressure out of it. I removed the factory manifold with a 4 way pipe valve and hooked it up that way. Now it works better than it did new. I took the regulator completely off and replaced it with a quick connect coupler. If I ever need to use the regulator for anything I put a set of quick connect couplers on it so only takes a few seconds to connect it.

@rudatheboy 4 года назад

Now this is exactly what I was looking for and very well explained you are the man 👍👍👍

@cyberlizardcouk Год назад

super video, but these manifold assemblies are made of the worst 'chineseium' known to man. They rot and break more readily than lego comes apart.

@David-xl9cp 6 месяцев назад

Thanks, just wanted to be sure and this was very clear, many thanks.

@mauriciocapovilla 4 года назад

That was very useful! Did exactly that today and this video helped me a lot. Thank you.

@lingureanumanuel 3 года назад

I used Loxeal 55-03 , thanks for your video

@BariGloria Месяц назад

Muy bien, barri la válvula con mucho ajuste, por eso la cambiare, la importo via Aliexpress, dado que en LIma no hay en el mercado. felicitaciones

@nelsonsantos770 3 года назад

Thank you for this video, really helped me a lot!

@zbigniewmikolajewski4079 Год назад

An awesome product

@marv.mon.9845 3 года назад

I did notice that in the middle of the video the regulator changed styles. It seems to be a completely different one. I'm sure the concept is the same though

@annagraham6204 Год назад

Good eye. Was watching a paint repair vid recently and the vehicles license plate changed states by end of it😂.

@jackalegsb1457 Год назад

Thank you so much. Problem resolved and all with no extra costs. Greetings from Brasil

@jazzmax9521 2 года назад

coool .. I can finaly fix my compressor 👍

@nelsonsantos770 3 года назад

which side is the motor wires and where is the power cord attach to?

@RyanBurisch 3 года назад

It doesn't actually matter, you could choose either side - in this instance motor is left, and feed right

@stevenetram 10 месяцев назад

is this what to fix when your building pressure regularly and pressure regulator is optimal but working pressure at tool fizzes out and doesnt work? even though tanks full and compressor isnt turning on.

@whatilearnttoday5295 6 месяцев назад

The only question I have is where to find a regulator which isn't based on a manifold made out of the cheapest alloy possible.

@ronmon6673 6 месяцев назад

Does Milton make something that would work?

@colt5189 9 месяцев назад

I'm going to use Loctite 545 for the sealant.

@otoniel780 4 года назад

hi I have question my compresor runs good when is empti to fill up but when I use the air cam down and the compresor try to start the swich from my home or box switch shut down and the compresor have to empty to runs again thanks

@nicusorionita3706 3 года назад

I want to make this project, i have all parts but I did not find that tube from the presostat to the regulator. Do you find on Ali Express?

@rajkishoredasartcrafts1565 4 года назад

What is the name of this oil that you used in joint place

@diykevsd8326 9 месяцев назад

Where did you get the replacement from?

@almendronman 4 года назад

Super useful! Thanks so much! Just one question, why don't you use the sealant in the 'discharge pipe'? Thanks! :D

@RyanBurisch 4 года назад

Hi. Because its a compression fitting, doesn't need sealant.

@suzieq8379 3 года назад

couldn't you just have unscrew the switch from the regulator??

@swfcowl5 5 лет назад

Perfect thanks

@jaimz33 Год назад

Where do those 2 cables go at the other end?

@seanwood5443 Год назад

y dont u ship to canada i want to buy this sealant

@cyberlizardcouk Год назад

why does the manifold assembly change types at the two minute point?

@annagraham6204 Год назад

Plus’s why can’t you just unscrew the bug nut and make the swap. This looks like a pia. I don’t know what he was calling it but it’s a f’n crescent wrench.

@georgeminns 5 лет назад

hey, do these compressors have a guage showing you how much/what pressure of air is in the tank?, or are those 2 guages just to set your outlet pressure (the non belt drive model)

@johncoops6897 5 лет назад

There are 2 gauges, one for tank pressure and one for outlet pressure. The internal structure of this style of manifold is somewhat odd, and it's not actually a "T-connection" like it initially appears to be. In actual fact, one gauge and one outlet relate to the unregulated tank pressure. The regulator knob's in the centre however the outlet port of the regulator only flows to one side. Hence the 2nd gauge and outlet are for the regulated pressure. Often people swap around the outlets so that the blanking plug (in the end of the regulated "arm") in placed into the unregulated outlet, then they re-install the second outlet onto the regulated side, where the blanking plug used to be.

@christianleblanc2842 4 года назад

@@johncoops6897 thanks for this information. Confirming I understand correctly: the outlet with the safety valve is the unregulated outlet; and the outlet with the blanking plug is the regulated outlet.

@SuperAlbino1 4 года назад

What is the name of the component that the lower end of the discharge pipe is connected to?

@moehammadabrams9355 3 года назад

RECTUM....:>)

@RyanBurisch 3 года назад

Check valve or Non Return Valve

@princeking7468 3 года назад

What about if pressure exceeds in compressor?

@moehammadabrams9355 3 года назад

EVERYONE DIES!!!!!....keep us posted....:>)

@nickythebull82 2 года назад

What’s a spanner

@vwecco1 Год назад

Tool used to measure the span of time… a chronograph or stopwatch.

@moehammadabrams9355 3 года назад

1:01 the BLACK PLASTIC COVER IS ON THE ASSEMBLY.... 1:05 Where did it go?...thats all I wanted to remove...thanks for the effort though....:>(

@RyanBurisch 3 года назад

Theres a single phillips screw on the top of the black plastic cover.

@Niafi11 3 года назад

Ha. Earth Terminal. Lol. Limeys Dang dude, Vac out that Tank though. you just dropped a bunch junk in there.

@kaseasdasd5053 2 года назад

really

@trillionbtamillion 5 лет назад

"Spanner"?!!!

@ChattanoogaDan 4 года назад

That's what I said...

@moehammadabrams9355 3 года назад

@@chadshryock8945 Fuck the rest of the world.WE saved their asses TWICE....and look at the 'thanks' we get...SCREW the rest of the world!....and have a fantastic day.....:>)

@Donegaldan 3 года назад

@@chadshryock8945 Not the rest of the world, Australia, NZ, Ireland, England and S Africa use "Spanner." Wrench is an American term. The video is from a British company, so Spanner is appropriate for them

@annagraham6204 Год назад

@@Donegaldan Well he’s a cocker spanner. It’s f’n crescent wrench.

@Donegaldan Год назад

@@annagraham6204 Cocker spanner new term. Pointless unintelligible comment.