How to Change Seals on a Pentair SuperFlo!

Подписаться 49 тыс.

Просмотров 38 тыс.

50% 1

In this video, Mark shows you how to change seals on your Pentair SuperFlo.
⏩ HAVE A QUESTION FOR MARK? ⏪
If you have a question you'd like answered or would like to book a 1 on 1 phone session with Mark, then consider checking out our Patreon page!
/ hallmarkpoolsupplies
Visit hallmarkpoolsupplies.com for all your pool supplies, and needs
Like us on Facebook: / hallmark-pool-supplies...
Video Timestamps
00:00 - Intro
00:45 - Housing bolts
01:41 - Removing the Diffuser
03:45 - Removing the old seal
05:15 - New seals
How to Change Seals on a Hayward Super Pump: • How to Change Seals on...
Video Links:
Shaft Seal: www.hallmarkpoolsupplies.com/...
¾ HP IMPELLER: www.hallmarkpoolsupplies.com/...
1 HP IMPELLER: www.hallmarkpoolsupplies.com/...
1.5 HP IMPELLER: www.hallmarkpoolsupplies.com/...
2 HP IMPELLER: www.hallmarkpoolsupplies.com/...
2.5 HP IMPELLER: www.hallmarkpoolsupplies.com/...
Impeller Lock Screw: www.hallmarkpoolsupplies.com/...
Diffuser Oring:www.hallmarkpoolsupplies.com/...
¾ & 1 DIFFUSER: www.hallmarkpoolsupplies.com/...
1.5 & 2 HP DIFFUSER: www.hallmarkpoolsupplies.com/...
2.5 HP DIFFUSER: www.hallmarkpoolsupplies.com/...
¾ HP MOTOR: www.hallmarkpoolsupplies.com/...
1 HP MOTOR: www.hallmarkpoolsupplies.com/...
1.5 HP MOTOR: www.hallmarkpoolsupplies.com/...
2 HP MOTOR: www.hallmarkpoolsupplies.com/...
Music: zachs_tape

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@rborroto 3 дня назад

Thanks for sharing this video. I'm actually replacing the motor on my SuperFlo pump, and this was helpful for disassembly and reassembly.

@anhLe-hn3ig 2 месяца назад

Video was well thought out. 2nd person as cameraman. Knowledgeable presenter. Pump & motor are reposition so viewer can see what is going on. Important details, specific tools, hints are mentioned. Very professional job. AWESOME!

@deerrudy Год назад

I've done this twice to my pool pump. This video much easier than the first one I watched years ago. Very straightforward and succinct doesn't waste your time with a lot of chatter. I appreciate that when you're trying to get something accomplished. Thanks for the video

@dalesalerno2474 2 месяца назад

His videos were explained in full detail, easy to understand and direct . Thank you .

@williamtucker208 15 дней назад

Perfect, subscribed and will tell friends, etc. if any still know how to swim? Seriously excellent work and you really simplify even for those who been away from this kinda work for a while, like ten years! Very professional in both content and knowledge as well as presentation!!! THANK YOU!!!

@Ryan31310 5 месяцев назад

The best pool pump video. i just watched someone replace a pump and they put metal side down on the shaft. I did too and now have a leak. thank you for helping me find my leak!

@robertvastano7293 Год назад

Thank you. Very easy to follow and helped me out. I agree with those that appreciated how succinct your directions were without lots of extra unnecessary chatter!

@kagahi1555 2 года назад

Thank you. Easy to follow and understand with no extra verbiage.

@paulj2383 2 года назад

Thank you for an excellent explanation. Your videos are a big help.

@joereyn3945 Год назад

What an excellent tutorial. All the little things -- tighten up evenly, don't use screwdriver to pop seal -- included. Well done.

@johnmichaelkarma 2 года назад

Excellent vid. I always appreciate those that will share info that will help do-it-your selfers. I am a first time pool owner this year and have watched many of your well made vids to help educate me on what I'm dealing with. This subscriber gives ya a thumbs up

@aaronlee9968 Год назад

😂

@williamparker6649 11 месяцев назад

Thank you I just changed my seal on my pump. It was a simple procedure with the help of your video🙏

@saileshp2903 2 года назад

Very well organized shop. Thanks for sharing..

@lisastewart5477 2 года назад

Thank you so much for the video. It helped so much and we’re no longer leaking !

@davidsarrazin2831 4 месяца назад

This was the best information for rebuilding my pool pump, Thank you

@medic5363 9 месяцев назад

Great video you saved me some money here I’m a novice at this pool stuff and this simple video saved me a few hundred bucks… TY from Miami!

@GabrielTube4Me 2 месяца назад

Excellent tutorial for this process. Much appreciate the guidance. Cheers.

@GerryB-pj1ip 4 месяца назад

Excellent tutorial! Thank you. The task took about 2 hours due to a stuck seal on the shaft, but some WD-40 and elbow grease took care of that. Strangely, the pump sounds quieter now, as well as holding water when turned off. I'll take that as a bonus.

@tommac5411 9 месяцев назад

Excellent video and instruction.

@user-rj6gr6tm1o 8 месяцев назад

Thanks Mark worked like a glove

@luisgines556 8 месяцев назад

Great tutorial changed my seal easily

@eebarreto Год назад

Good instructions

@mchaelhron279 Год назад

Very good video. I enjoyed that!

@moisesperez4659 Год назад

Great video. Also could apply to replacing motor.

@jorgemarquez701 11 месяцев назад

Love the video I always been taking care of my pool but now I have a motor problem noise So I can take it apart thankssssss

@dapoolboy7532 Год назад

EXCELLENT!

@westnewwest4325 Год назад

Thank you...really helped

@randallwilkinson3160 9 месяцев назад

Thank you!!!

@sewerswan8422 Год назад

Wish my workshop was as organized As yours Guess I do too many projects after a few too many beers lol

@muthuTamillan 2 года назад

very nice

@zachhopkins9719 3 месяца назад

Thank you

@piperodriguez9360 10 месяцев назад

Ola amigo gracias Dios te bendiga 👍

@chucklakes2345 4 месяца назад

Great video! Do you recommend always changing the seals anytime you have to work on your motor. For example, if I change the bearings, is it a no brainer to change the seals as well?

@HallmarkPoolSupplies 4 месяца назад

Yes, l would agree. Thanks for watching.

@peterbarker6002 9 месяцев назад

Excellent video. Do you have any tips on how to remove the old seal bearing if it is seized to the shaft?

@HallmarkPoolSupplies 9 месяцев назад

Sometimes this happens and it can be a little difficult removing the old seal. Use a pair of pliers to help wiggle and pull off the seal. You can also use a little WD-40 this should help. Lightly sand and lube the shaft before installing the new seal to insure a good fit. Thanks for watching.

@fernandoa.1323 11 месяцев назад

Great video!!! I'm upgrading my pentair pump to variable speed motor so I will replace seals to the old pump. What kind of lube do you recommend for shaft seal and o-rings? Thanks

@HallmarkPoolSupplies 11 месяцев назад

Here is a link to the lube, thanks for watching. www.hallmarkpoolsupplies.com/p-6239-1-oz-magic-lube.aspx

@boomerboon1946 4 дня назад

Excellent tutorial! Is there any component on that pump that would cause air bubbles to be forced into the pool? Pentair Superflo is 6 years old. Thanks.

@HallmarkPoolSupplies 4 дня назад

@@boomerboon1946 l have a video that pertains to this issue, hopefully this will help. Here is the link for the video. Thanks for watching. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SiEOIxYpJ5g.htmlsi=zq0Ba-yVRgnmJYWO

@Owenk23 2 месяца назад

Great video. I followed the procedure but when hooked back up my pump won’t prime/suck water in. Any suggestions?

@HallmarkPoolSupplies 2 месяца назад

If everything is put back together properly you should be able to prime. If you are still having an issue, l did make a video on how to prime your pump. Here is the link for that video, hopefully this will help. Thanks for watching. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YztmTi68HXI.htmlsi=AlRBrfoAwvXfQeof

@jay-ti4bt 8 месяцев назад

So i do pools, and im working on this pump, few things are off maybe you would know why? The shaft needs a 7/16th wrench to hold it still, the impeller reverse thread nut needs a nut driver thats bigger than 3/8ths.

@HallmarkPoolSupplies 8 месяцев назад

The reverse threaded screw on the impeller can also be removed with a flat head screwdriver. Thanks for watching.

@cravenmorpus Год назад

I've always been taught to not touch the white ceramic part of the seal with your barehands. Is that false? Or doesn't the oil from our skin damage if quicker over time

@HallmarkPoolSupplies Год назад

Handling the seals is fine, however chemicals and improper water balance will do more damage to the seals over time.

@TerryWysocki 9 месяцев назад

I have a 2hp SuperFlo on my spa. I assume I have to drain it to a level below the pump before I take the motor off?

@HallmarkPoolSupplies 9 месяцев назад

yes, in most cases you will have to drain or lower the water unless you have shutoff valves. Thanks for watching.

@fingers11100 11 месяцев назад

Hi, quick question, have you seen the impeller being the reason for a leak? I had a pool company come out replace the gaskets and I still have a leak and they're saying it is the impeller. Just asking cuz I'm starting to get deep into this project. Thank you

@HallmarkPoolSupplies 11 месяцев назад

Usually it's the seals unless the impeller is cracked. If the impeller is damaged and needs to be replaced, you would then need to change the seals as well. Thanks for watching.

@haivo3413 Год назад

MY PENTAIR MODEL NO 340039 LOST SUCTION WHICH I NEED TO FIX THANK

@jackparker9352 Год назад

I am having issue getting the right size inside seal for my pump I have obtained two different ones. One is way to big the other is just a hair to large. My pump model is SFN12A and suggestion what to order and where to get the right one

@HallmarkPoolSupplies Год назад

If this a Pentair Superflo 2021 and prior here is the link for the shaft seal. hallmarkpoolsupplies.com/p-3871-354545s.aspx

@joereyn3945 Год назад

Having a lot of trouble finding the seal kit (and o-rings) for this on your site

@HallmarkPoolSupplies Год назад

The seal set and other parts for this pump is linked in the description of this video down below. If you have any questions feel free to contact me, I will be glad to help.

@caraqueno12 Год назад

as you remove motor and electric components , do you have to reset every thing ?

@HallmarkPoolSupplies Год назад

No, thanks for watching.

@jimw125 2 года назад

My superflow motor old bearing was a 6203, but a new 6203 won't fit on. The shaft is clean. I swear both bearings read 6203. In fact I got four new bearings and all are too small for the rear shaft although they fit the front nicely. What to do? There was a noticeable difference in the size of the bearing inner races, I think .62" for the new and .635 for the old. Makes no sense to me.

@HallmarkPoolSupplies 2 года назад

I would take it a motor shop and let them redo the bearings for you.

@KurseA1582 2 года назад

Can I use a superflo pump to replace a whisperflo pump?

@HallmarkPoolSupplies 2 года назад

Yes, both pumps are similar just make sure they are the same horse power.

@jacksmachine1874 3 месяца назад

I replaced the housing and the bottom bolts are extremely tight before screwing all the way. Leaving a tiny gap at the bottom where it connects to motor. It will not close. The seal pushes too hard against it.

@HallmarkPoolSupplies 3 месяца назад

Some of the older pumps used 2 long bolts and 2 short bolts when connecting the motor to the housing. Make sure the long bolts are on the bottom and short on the top. If you have this exact pump in the video then you can lube the large o-ring and the diffuser o-ring on your motor, this will allow you to easily put the motor and housing together. Tighten all bolts evenly, so you can draw the motor bracket evenly to the housing. Do not over tighten. Good luck, thanks for watching.

@sonyajones8447 2 года назад

How to change O ring for the lid .the clear see through lid.

@HallmarkPoolSupplies 2 года назад

Best way is to use a small flat head screwdriver to get the o-ring out.

@davidsamadnejad5480 Год назад

Thank you for your help my pump makes noise could you help me thanks

@HallmarkPoolSupplies Год назад

What kind of noise is your pump making?

@robertcabrera3375 Год назад

@@HallmarkPoolSupplies Hi since he did not answer and my neighbors exact 196239 model is making a high pitch sound I will ask :)

@HallmarkPoolSupplies Год назад

If your pump is making a loud noise, it’s probably the bearings. Depending on the age or condition of the motor it can be repaired. If your motor is over five years old I would replace. If you opt to repair get an estimate so you can compare cost.

@robertcabrera3375 Год назад

@@HallmarkPoolSupplies Thank you! It's coming up on 5 years this July. I might consider replacing the bearings for him as I have worked on a couple well pumps, if I could source the parts. Worst case I did find the same pump on line for $411.40

@flossyphotography 11 месяцев назад

What brand of lubricant are you using?

@HallmarkPoolSupplies 11 месяцев назад

In this video i used Magic Lube. Here's the link. www.hallmarkpoolsupplies.com/p-6239-1-oz-magic-lube.aspx

@gagearnold61 Год назад

I can’t get the first shaft seal off. It’s like it’s corroded to the shaft

@HallmarkPoolSupplies Год назад

The seal will come off, you may have to use a pair of pliers and wiggle it off. Thanks for watching.

@hotzizzle1348 9 месяцев назад

What is the size of the seal for a 1.5hp?

@HallmarkPoolSupplies 9 месяцев назад

It depends on the pump, not all seal sets are the same. Just make sure you get the right seal set that is made for your pump. Thanks for watching.

@hotzizzle1348 9 месяцев назад

@@HallmarkPoolSupplies is the same one like in your video

@HallmarkPoolSupplies 9 месяцев назад

The Pentair SuperFlo is 5/8”.

@hotzizzle1348 9 месяцев назад

@@HallmarkPoolSupplies arrange thanks a lot. I'm going to give this try. You're the best

@jesseteran9648 6 месяцев назад

You can hold the impeller with your hand to remove the reverse screw, also you really don't want to touch the face of the white ceramic seal while pushing it in to place, the grease from your fingers is not good to get on it, you're better off pushing it in place with a clean piece of paper

@SPaddy-fb7hy 2 месяца назад

Oh shut up.

@jesseteran9648 2 месяца назад

@@SPaddy-fb7hy why so mad, I do pool repairs for a living, I'm just sharing what I've learned from other pool repair techs in the 15 plus years I've been in the industry

@SPaddy-fb7hy 2 месяца назад

@@jesseteran9648 You think you know better than this guy? LOL There's always an idiot saying "I know better" congrats that's great, now go make your own video. Armchair quarterback.

@joereyn3945 Год назад

Different motor. And no impeller screw? 35-5067? Of course it appears the motor completely different has some spring gadget I guess for a motor trip of some sort. Century motor.

@brendanmathews1997 Месяц назад

Never touch the white ceramic oring

@lenawidegren2520 Год назад

Svenska

@thedalaidrama Год назад

Are u supposed to touch the sealing surface with ur fingers? I heard different

@HallmarkPoolSupplies Год назад

You will be fine. Thanks for watching.

@RadioRich100 Год назад

You didnt replace the backside seal or didnt show it.

@HallmarkPoolSupplies Год назад

You are referring to the slinger, this is not part of the seal set. The manufacturer should include the slinger with the seal set, however the slinger is usually never replaced, this is probably why its not included. (good point)