No video :(

How To Change The Serpentine Belt On A 2003 2004 2005 2006 2007 2008 Toyota Corolla

Подписаться 52 тыс.

Просмотров 185 тыс.

50% 1

In this video I show you step by step how to change your serpentine belt in a 2003-2008 Toyota Corolla. This should be a similar process on the Toyota Matrix and other Year Corollas. People also refer to this belt as a drive belt or v belt or alternator belt. You will need a 10mm socket and socket wrench, a 10mm open ended wrench, a serpentine belt tool, and a new serpentine belt.
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
2003-2008 Toyota Corolla Serpentine Belt On Amazon (verify correct belt for your model and year) - amzn.to/3IR94Tx
Serpentine Belt I used In This Video On Amazon (verify it fits your vehicle) - amzn.to/3IWcsNO
Gearwrench Serpentine Belt Tool Set On Amazon - amzn.to/3Zkqazt
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3IDvbfU
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3J6BUAx
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41BrTCy
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
Intro/Outro Music: RKVC - Tropical Thunder
Middle of Video Music: Afterthought- Destiny & Time
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 110

@gremlin7599 Год назад

Thats not a valve cover, thats a beauty cover

@jeannierusso2134 2 года назад

Thank you for your video my mechanic friend literally just told me yesterday that I need a new serpentine belt he saw it as he was giving me an oil change.. and I have a 2007 Toyota Corolla . Thank you for your video hopefully the bolt underneath won't break on me.. pray everybody that everything goes smoothly...honk.- honk ..🚗🚘

@ToddsGarage 2 года назад

Thank you for watching, I appreciate it!

@iqmart2974 2 месяца назад

@@ToddsGaragebelt size 6PK 1230?

@1velli 2 года назад

If you don't want to buy the belt tool, just use another wrench with the 19mm

@yvngkels1223 2 года назад

And maybe even another 🤣😂😂 I gotta do it tonight so fun

@elvirhodzic5720 Месяц назад

Its easier to buy tool for it😂😂😂

@fireyourrocketts 2 года назад

Came to this video after wondering how the hell I install my serpentine belt in newly restored engine for a 2004 Toyota Corolla, LOL, the thing is I thought the belt would go under that timing flap protruding from the timing cover but then a quick look at your pro drawing of the belt was enough to makes me sight in relieve, LOL. My engine is still out of the bay, I wanted to put it in completed but the compressor still in the bay as AC is sealed, so belt would have to go in after engine is in. Got the same tool as you do here. Gearwrench rocks. Have one from Harbor freight too but can not compare the 2. Thanks for the video.

@idmhead0160 Год назад

If you are talking about that rectangular piece of metal, I was looking at that too. My belt snapped. So, I wasn't able to see how it was originally. Replacing the belt may be the easy part. When the belt snapped off, it cause a coolant leak somewhere. I need to locate where. I think it might have hit a hose in the front, but, it wasn't obvious where the leak was coming from.

@juniorcruz960 2 года назад

Thank you guy on this wonderful guide to take the alternator off and showing us how to putnit back on with the diagram drawing of the belt what a good way to show us how to replace the belt thank you again

@ToddsGarage 2 года назад

Thanks for watching, I'm glad the video helped!

@juniorcruz960 2 года назад

Yeah it did get bit confusing and complicated to figure it out to put the belt on but I got it and the new belt worked out awesome 👌 have a great new years

@ToddsGarage 2 года назад

Thanks and hope you have a great year as well!

@simonene2969 Год назад

Thanks Todd. Your video, especially your drawing was most helpful. Great video, great step-by-step guide. Cheers man.

@duckmyass Год назад

Wow, talk about making a simple repair difficult. You don't need to disconnect the battery, you don't even need to remove the plastic trim, and you really don't need to buy a special tool for the tensioner. All you need to have is a 19mm socket and a breaker bar. That's it. With that one tool you can do this repair in less than 10 minutes.

@TAC40_ 5 месяцев назад

Bro relax lmao

@Determinator21 Месяц назад

@@TAC40_ no, he's got a point.

@elvirhodzic5720 Месяц назад

@@TAC40_ he got the point . Making easy job so complicated is just insane. Just listen the tone of his voice while he is explaining😂😂😂

@landonwatson9532 2 года назад

Very helpful explained everything clear I appreciate everything thank you...👍✌️

@hamedkhan3071 2 года назад

Explained very clearly. Very informative video. Thanks

@TimBosler-yp4gf 3 месяца назад

Thanks

@coalcreekdefense8106 3 месяца назад

Jack up the car, USE A JACK STAND, then do most of the work putting the belt on from underneath. I just got done with this job. I fought that stupid belt for 2 solid hours and got nowhere. Then I jacked my car up and I got the belt on in 7 minutes. I can't believe all these videos are telling people to do this from the top, when it's SO MUCH easier to do from below. I get that a lot of people won't have a jack and stand to do this, but it's almost worth it to go out and buy them just for this job. I would have given up if I hadn't tried it this way.

@markhernandez7424 8 месяцев назад

Great video man! Very detailed and well explained!

@thehugob77 10 месяцев назад

learned something a bout 1 syllable words that sound like 3. also how to change belt. kudos!

@beffyzakaria2929 11 месяцев назад

thank you for tutorial 👍 greating from Indonesia...

@gr2262 2 года назад

Great work but there is absolutely no reason to disconnect the battery and or remove the plastic cover. All can be done as is.

@Peter-tf2uc Год назад

This is very detailed. Thank you!

@bepeas80 Год назад

This video is awesome,appreciate it very much,I am going to attempt to replace mine,I hope all goes well,I have no mechanic experience whatsoever lol.

@jtBassin. Год назад

did it work?

@Politically-incorrect-brian Год назад

Did you succeed? Im about to embark on the same journey myself and wanna see what happens lol😊l

@bepeas80 Год назад

Yeah dudes! Pretty simple,just make sure you have the right belt,and drawing a pic to have an idea of how it goes back helps a lot,good luck 🙌🏽

@bepeas80 Год назад

I recently changed my coils and spark plugs too! RU-vid seriously has great vids and tips of all sorts,I have no mechanic skills,but I sure did feel like one,felt good actually haha 😁

@reltonisaacs7169 3 года назад

Very helpful

@ToddsGarage 3 года назад

Thanks for watching!

@wonderming1 11 месяцев назад

Thought I could get by without a jack like you did, but I needed to take the passenger tire off to get access to the bottom area.

@Adeshjackhan 4 месяца назад

THANK VERY HELPFULL.

@user-dv6nq2ds5i Год назад

Excellent explanation, thanks

@hillcress7093 Год назад

Thanks for the video Mr very helpful

@OscarM.94 2 года назад

change the muti v belt for first time and save $$$ helpful video thanks man!👍🏻btw got the same Continental belt lol

@ImNoBSING 2 года назад

The belt makes an 8-figure, I hope that makes it easier for anybody to remember.

@cristianbautista3837 Год назад

Thanks todd!

@cristhianvillagra2204 2 года назад

Thanks man for the help on the info you gave on this video never done it before and it took me minutes thanks 🙏

@ToddsGarage 2 года назад

Thanks for watching, I am glad this video helped!

@ignaciomaldonado9511 9 месяцев назад

The plástic cover over.valves needs to be removed to avoid breaking it abdt to allow better work space. The belt tensioner can be resolve with a long breaker bar. The battery + terminal needs to be removed to avoid engine start while someone is working up front. Safety always😊😊

@Cosmonova_187 Год назад

Very good video, thank you

@laquinceanera 3 года назад

Thanks!

@ToddsGarage 3 года назад

Hi Miguel, Thanks for watching!

@gordonfuentes808 6 месяцев назад

Awsum video very educational for ppl lyk me U made it 👀 so ez Esp wit da rte tools n rte mind😎 All u nd iz a lil payshents n time Mahaloz n Aloooooooha 🤙🏾✨🏝️

@VeryBadReputation Год назад

I hear a squeaky noise at low revs when the AC is on. Lasts like 1-2sec until the revs go over 1500. Not idling, only when pulling away. Think it might be the belt or a faulty pulley?

@deanhenthorn1890 Год назад

I just replaced my 2005 Corolla serpentine belt today. Advice: Use the VIN number to get the correct belt. The guy at the parts store went off the normal information of Year and Model, gave me a belt that was slightly too long. After wrestling to get get the new belt on with its prepackaged tight bends, finally getting around and on all the pulleys, I discovered the belt tensioner was not going to tighten it properly. So disappointing! Thus another trip back to the store. This time I gave the VIN number and Hello Kiddos, this belt was the right belt. Why didn’t this guy show the difficulty getting the belt on? Because he knows the new belt doesn’t go back on as easily as the old one came off as! That’s why! BTW, the old and original serpentine belt had 176K miles on it! A wing and Prayer! Wings and Prayers!

@gail6904 Год назад

many say u have to r loosen the 17 mm bolt below that 19mm bolt first ??

@bigbollas7150 2 года назад

Dumb question, but what's the size used for the serp belt? i got a 05' corolla with a 1zz-fe engine. been looking it up on Google and Amazon but kept second guessing myself when I saw the different types of belts.

@Supermrloo Год назад

Hey mate, if you're still looking for a belt its best to go do Part Souq. All you have to do is search your model car and it will list the toyota part diagrams with model numbers. It tells you what the OEM part is and alternatives.

@galenyoung8349 7 месяцев назад

Thats not a valve cover, thats an engine cover. Yes, theres a HUGE DIFFERENCE

@anthonyC9199 11 месяцев назад

I was driving my car the other day and I got a battery light on the desh. I figured it was the heat of the day getting to the battery or the alternator. Eventually the motors started chugging and I had to pull off on the freeway. After I got home with a tow, and pop the hood, I saw that my serpentine belt was completely obliterated/gone/strings. I guess I had been driving with no belt for a while and just battery power was firing the spark plugs. What's the worst that could happen. I'm going to replace the belt today sept 14, 2023. Crappy few years it has been :[

@user-kp1ks7tj9t Год назад

شكرا لك

@ettaobjectives7829 2 года назад

Todd, yr recommended tools, it seems it does not work on our 2005 Corolla, because the socket with 19 blot could not fit into the belt screw! It looks its have a side-long- metal box over there and the room is too small for the wrench to put into. Can you tell us how to go further?

@neillarsen6037 Год назад

I Wish I had seen this earlier; same issue using the tool on 2005 Corolla LE. There's not enough room to put the tool onto the tensioner bolt.

@idmhead0160 Год назад

@@neillarsen6037 I'm planning on working on this tomorrow. On a 2007 Corolla S. I agree that it looked like there wasn't enough room for a socket. It looked like a wrench would be needed instead.

@idmhead0160 Год назад

@@neillarsen6037 Did you figure it out? I found out there is a separate bolt shaped piece of metal on the tensioner arm itself. That one is 19mm. This is separate from the bolt that attaches the tensioner itself to the engine, which appears to be 17mm. That one is too close to the side of the engine compartment to use a socket on. The one that you're supposed to use has enough room. It's not really a real bolt. It's a piece of metal that is part of the tension that is shaped like a bolt.

@alexanderkunitsa568 2 года назад

His belt looks like mine when I took it in to have air bags replaced couple years ago t Dealer told me i need to change it I drove my car another 50k before i changed it .

@wjm3018 2 месяца назад

I didn't see how you did it. The camera focus is not showing the belt

@Bigpunstacostand420 2 года назад

My belt won't tightens up after took it off something I'm doing wrong belt is on wrong maybe

@ToddsGarage 2 года назад

Hi and thanks for watching, sorry its hard to know without being able to see it. If there is still slack in the belt my guess would be either the belt is the wrong one and is too long, or its not wrapped around the pulleys correctly. Thanks again for watching and good luck, I hope you are able to get it fixed.

@wabblewater 2 года назад

No need to loosen the tensioner bolt unless you are going to replace the tensioner

@gbengaaboyeji302 2 года назад

How sure are you about th is, pls?

@mikeybutterbredt8447 2 года назад

@@gbengaaboyeji302 100%

@kristopherhollon5852 Год назад

@@mikeybutterbredt8447 ya I was thinking the same lol

@mondayoladipo4698 2 года назад

The number of the belt please

@HungNguyen91622 2 года назад

Why do you need a "tensioner tool" if you can use a breaker bar.

@idmhead0160 Год назад

I haven't tried it yet, but, it looked like there wasn't even room to fit a socket onto the bolt. I hope to try to replace it tomorrow, so, I will find out for sure.

@christined4452 Год назад

05 no removable of anything . socket ,breaker bar for leverage. Remove , replace and release tension. Done.

@hershellacey9405 4 месяца назад

Absolutely.

@carolynjohnson8723 3 года назад

Who do you do if you break the bolt that holds the help hold the belt tight

@ToddsGarage 3 года назад

Hi Carolyn, thanks for watching. Are you talking about the bolt on the tensioner pulley?

@carolynjohnson8723 3 года назад

@@ToddsGarage yes

@ToddsGarage 3 года назад

Hi Carolyn, I don't have a video on that unfortunately. Sorry I can't be of more help and I hope you get it fixed.

@hanknmosul 2 года назад

I'd give it to a shop to replace, because you will not get it yourself (probably). Here's a link to a video here on RU-vid that shows the process. It's not a good time. Good luck. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-abxTekwidY8.html

@idmhead0160 Год назад

Were you able to fix it? What happened? The bolt broke off?

@engsurveyingamin3349 Год назад

10000000000 flower bro ❤

@vivairaq8200 Год назад

Size belt ??

@d-plusevonytutorials Год назад

What's the new belt number

@CutterElfquest Год назад

Why disconnect the battery 🤷🏻

@lawrencejensen1240 2 года назад

I have a 1999 Toyota Corolla LE with 128,000 miles on it and the original belt and tensioner on it this is October 2021 I replace the tensioner and the belt

@ToddsGarage 2 года назад

Thanks for watching, that serpentine belt lasted many years!

@jimbark4642 2 года назад

Isn't there another bolt under the the tensioner bolt that you must loosen first before you can release the tension?

@hanknmosul 2 года назад

I don't think so. That bolt is the tensioner pivot bolt, and as you said, it sits right below the tensioner bolt. The tensioner bolt is a little harder to see because it sits back a little further and above the pivot bolt. The pivot bolt (which you don't want to use) sticks out furthest and "looks like" the one you want, but it isn't. Look hard above that pivot bolt, and you will spy the real 19mm bolt that you want. I think the pivot bolt is a 17mm.

@mistervacation23 Год назад

Never try to change a belt with the motor running I got my hands all cut up

@idmhead0160 Год назад

You must have forgot to put on your safety gear

@blueangel6 2 года назад

Found Mikey Day's secret hobby YT channel

@josephwilson2845 Год назад

No need for the hand drawn diagram. There should be a sticker under the hood with a routing illustration. Good video though.

@joelapointe771 2 года назад

This looks easy... No way I am paying a mechanic to do this..

@walterjunovich6180 2 года назад

For those of us not gifted withe baby arms 👶😄. Is there a procedure to do this by removing the passenger side wheel and wheel liner to get a more direct access to the pulleys ???

@brickwitheyes1710 2 года назад

FYI 19 mm is 3/4 you don't need a 19 mm. 19.05=.75

@danielballadarez7363 3 года назад

Your voice was annoying but you did an excellent job describing how to do it 9.7 overall lol

@ToddsGarage 3 года назад

Haha, thanks for watching!

@jimbark4642 2 года назад

Voice of a mechanically inclined man

@johnforgett9179 Год назад

Worthless no view of install

@JuanPereZ-ji1op 2 года назад

Squeaky voice very annoying dude

@brickwitheyes1710 2 года назад

You should just appreciate people take the time to do this for us

@JuanPereZ-ji1op 2 года назад

@@brickwitheyes1710 ahhhhhhhhhhhhhhhhhhhh

@brickwitheyes1710 2 года назад

@@JuanPereZ-ji1op do you disagree?

@JuanPereZ-ji1op 2 года назад

We don’t tell him to make them his actually making money because of us

@brickwitheyes1710 2 года назад

@@JuanPereZ-ji1op 😆 he has 16,000 subscribers and has no market for live casting. He doesn't make shit off these videos. And if he did your initial criticism would be even more invalid. Morons