Just ordered a couple of water seal kits from you guys. The vid inspired me to replace them and give the machines a good clean up. Thanks again guys. Awesome tutorial.
Top Video and very helpful. Unfortunately, I don't understand everything to 100%, but it's enough to understand what is meant. Keep it up, Greetings from Germany
Hi Excellent video. I have milky oil, so suspect the water seals. Can you supply the water seal kit? Also is there a particular lubricant you recommend. Thanks and hope you can help. Yours Greg
Hi Greg yes we supply any kranzle part 👍 Your oil chamber will need stripping and cleaning to prevent milky oil that is left in mixing with the new kranzle-pressure-washers.co.uk/collections/seals/products/genuine-kranzle-14-mm-water-seal-kit-49053-fit-new-7-122-10-122-models
Hello I’m Pedro ask if kranzle has a 220volt,,I’ve notice it in your previous video,,can you please reply can you give the model is 220volt,thanks pedro
I have replaced the lance hose on my machine and now the seal kit following your excellent video. However my kranzle every three or four minutes re pressureises can you help ?
Yeah sure, l👀k for leaks 1st, (any leaks) or even water coming out of the nozzle when trigger closed Sort any leaks If it still happens then it’s an internal leak most likely the out let valve take off and clean 👍
I have cleaned the inlet filter and removed and cleaned the drain bolt I’ll change the washers on the hose line and get back to you on Monday day I’ll probably call you guys Thank you for your response
So my Kranzle 1322 has zero pressure when I turn it on. I have not replaced the seals yet like you just did. Do you think there is a possibility that changing these could bring that pressure back? Thx!
Milky oil is not always a case to change the water seals, it is possible that the oil housing has had moisture in it like condensation and may just need the oil changing. if oil or water leaks from the pump then yes you will need to change the seals. find us on instagram @kranzle_ and contact me if you need help
I will strip out all the seals and clean off to see if any contamination. Can you replace damaged ones only or is it hard to see and obvious marks in seals?
if you see any damage on the seal it is best to just change the whole kit, otherwise you may have to strip the machine again soon as all the seal have had the same amount of work
yes it may help if you have a water leak, sometimes milky oil is just a little moisture in the oil chamber like condensation and may just need cleaning out
@@KranzlePressureWashers I was able to take it apart and found the culprit of the milky oil which was a leaky seal. However the parts have been stuck at customs all week!!!
Honestly speaking i own a Brand new Kranzle 1622 i opened the box to find out they now come with NO SIGHT OIL GLASS .not to see the oil and keep a eye on the color of the oil ect.. IS BULL SHIT SCAM CUTTING CORNERS LIKE THAT SHAME ON KRANZLE as a owner I am pissed that You guys/Kranzle are now cutting corners like this .what else has Kranzle cut corners on the inside moving parts .The versions you have there where the best solid built models make by Kranzle . the inside components seal's where changed to a lower quality after that. By cutting corners and selling lower quality 1322/1622 to America will now you by loosing business. Cut it out and bring back the 2020 model builds again
Sorry not sure what your on about, the link for the seals that are in stock is in the description??, it’s nowhere near the cost of a new pump?? In the seal kit there are 6 seals, 6 washers, 3 support disk and instructions