How to check the brake cable lines, cents, and taillights for yamaha fino, mio, jupiter, mx, vega zr which are still carbureted.
the steps we must know are the meaning or function of the color How to open and install a valve, templar or valve trigger, noken axle, valve seal honda supra, grand, legend, fitnew and the like. The first step we have to do is open the templar part by using a fine 12 bolt input and pull it out. then remove the valve. the axle by pressing it.and to open the valve, press it slightly simultaneously on the nail stud of the valve using a 12 T wrench..and to remove the valve seal can use pliers or a screwdriver.and for installation, insert the valve first, then the spring is the same back and forth, attach the valve nail and press it with a 12 T key and be given a holder from plastic or an old inner tube, and hold it at the bottom with the valve cap.
.and attach the camshaft as before and the position of the camshaft must be free. Then attach the trigger or valve templar and the pen part with 12 bolt threads must be on the outside.
Thanks to the audience, hopefully the knowledge is useful.
Please #SUBSCRIBE AND LIKE#
.if you have any questions you can write in the comments
Tel/WA: 085863491419.
9 сен 2024
