How to check the Honda Vario Karbu ignition cable line.
The first step is to check the ignition to make sure the 12 volt battery current reaches the CDI socket.
then check the white charging spool, make sure the current reaches the kiprok socket on the top right.
then make sure the red kiprok output current is coming out and going into the battery plus. Then make sure the green cable is connected to the body or motor frame.
then also make sure the green cable and white line are connected, because as a mass line or stop the wind.
then on the cdi path, make sure the pulser current is good and arrives at the cdi socket.
then make sure the red wire with the black line has battery current after the contact is on in the cdi socket.
then make sure also the black wire and the yellow line is the cdi output current going to the coil. and when the green wire coil is connected to the motor body or frame.
Thank you very much to all #SUBSCRIBER# and viewers wherever you are, hopefully the knowledge is useful.
Please # SUBSCRIBE AND LIKE #
#SIDIK NURYADEN CHANNEL#
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
2 окт 2024
